Question about Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Maytag top load neptune washer

Pump dosn't pump out. Has 20V. In test mode pump works 120V.

Any clue what going on here.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The pump is clogged up or the flap is jammed

Posted on Jun 24, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 96 Answers

Have no idea why you would only get 20V at the pump when you get the full 120V in test mode. However, if you do get 120V, not 20V, then the chances are that the water level pressure switch is giving a faulty reading which tells the board that the basket is already empty.

Posted on Jun 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag washer nd code


The control board is faulty and will need to be replaced. Here is the part to order and it comes with a 365 day, any part, any reason return policy.

Jun 23, 2013 | Maytag MAH8700A Front Load Washer

2 Answers

My maytag neptune fav6800vaw washer will not complete the wash cycle. i press pause but the lid does not unlock so the machine is still filled with clothes & water.


I would go into Service Mode and try to unlock the lid latches. Google this

Neptune TL Washer FAV6800AWW

Go to the 5th post down there is a link to the Service Manual. The Service Manual will show you how to get into Service Manual and unlock the lid Locks. If you can't unlock in Service Mode the Service Manual will show you how to release the washer top from thew base to remove your clothes.

If you need additional help post in that forum for help ; Maytag/Magic Chef/Admiral/Jenn-Air

Aug 04, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

We have a maytag neptune TL. Usually when you hit start to run a load a little water comes out of the discharge hose. It is not doing that. It runs in the wash cycle for about 8 minutes the it pauses...


If the machine is a FAV6800A or FAV9800A google ""Sticky: Neptune TL Washer FAV6800AWW""" Post your problem at this Forum. You will find the FAVA9800A/FAV6800A Service Manual at that site.

If the machine is a FAV6800A or FAV9800A you can go into Service Mode and tes the Drain Pump. Then we can start to troubleshoot the issue if the above model is your machine type.

This site is not really geared up for DIY folks.

Jan 09, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag neptune tl fav6800aww wont dispense fabric softner


Test mode? Do you mean Service Mode and you turn on the solenoid for the water valve to divert water to the Fabric dispenser reservoir and it is flushed in Service Mode?

See if this solution will help with your trouble shooting.
Let me know if I can help……Rich

Apr 19, 2010 | Maytag Neptune FAV6800AW Top Load Washer

3 Answers

Need to know what light bulb to use in Maytag Nepture washer


how do I get to the light bulb on the Maytag Neptune front load washer, to change it?

Feb 06, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag neptune washer stops after filling with water on the first cycle...will not spin Neptune stops after filling. No codes. Lid unlocks. Ideas?


Hello n8mtsn,

I would pull the 120VAC power cord to the washer for 10 seconds then power back up.
See if you can get into service mode. To enter Service Mode press and hold he Enviro Plus and Spin Only keys for three seconds or until the control beeps and the display reads “00”. If you can’t get into Service Mode I feel you have a Control Board issue/failure.

If you can get into Service Mode then go to page 15 of the SM and we want to try a Quick Service Cycle test. Follow the instructions to enter the Quick Service Cycle test and let us know the results. If the test will run it will take about 10 minutes.
Link to Service Manual for reference. Sears Parts Direct for reference.
Rich

May 30, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag Neptune MAH5500BWW Will not spin


maytag neptune washers do have a motor problem and they have a kit to replace the motor and motor controller.
when the motor fails, it wont wash or spin. most units have a 5 year parts warranty and should be replaced with a free part, but you will have to pay an authorized servicer to do this.
if it is over 5 years then i would call maytag and see if they will help you with an authorization for repair.
most of the time they will provide the part for free. just call the 800 # and ask for help. they wont send you the part but might give you some help with the parts.

Jan 04, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag Neptune


the main control board could be bad, i dont want to tell you to replace it as it is expensive. call maytag and see if you can bring it somewhere to test.

Jul 15, 2007 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...