Question about Washing Machines

1 Answer

NEC washing machine displays E9 - Washing Machines

Posted by on

  • Anonymous May 10, 2009

    what e9 error code

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Fault code e9 relates to pressure sensor.
check connections or replce pressure sensor

Posted on Jan 23, 2009

5 Suggested Answers

  • 1 Answer

SOURCE: My NEC NW 652 washing machine is showing an E9 fault

E9 means the waterlevel sensor is defective or the pipe connected to it is faulty.

Posted on Jan 27, 2009

  • 6277 Answers

SOURCE: My NEC, NW-452 model washing

Hi from retired Englishman in SW France,
(sorry, do not know your particular washer but try this - it's a VERY common problem!)
I would gently suggest as a first step that you clean the drain motor/pump lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to spin or release the door lock if there is any water still left inside.
Here are my complete and generic guidance notes for checking both the drain motor filter and the drain motor ;-0)
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!). These panels are either held on by (plasic) screws or will just pull off. Most filters are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play.

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT.
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Posted on Jun 18, 2011

IrishDruid
  • 2712 Answers

SOURCE: NEC NW-491 washing machine. I

This usually indicates a problem with the water pressure sensor or the water level switch. A defect--or an obstruction--in the water-level switch may cause this issue. Check the sensor by pulling the hose attached to the bottom part of the tub and blow on it and test the terminals of the sensor if it will close or open

Posted on Sep 28, 2008

  • 4090 Answers

SOURCE: NEC NW 892 Errror E9

This error is related to the pressure sensor


check connections or replce pressure sensor

Check at the water source end of the hose and make sure the filter is not occluded. Both hot and cold. more likely the cold side as the hot water may disolve the particles more easily.

If all else seems good you will have to replace the sensor

Posted on Aug 01, 2009

TheMobilian
  • 8147 Answers

SOURCE: When putting washing machine on,

Location of Duet controls with top removed:
themobilian_673.jpg

Posted on Jan 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HELP ME: SANYO WASHING MACHINE DISPLAY E9-10


Contact the manufacturer's Tecnical Support site.
I don't know where you are so try this...
http://www.kolkataservicecentre.com/washing-machine-service-centre-kolkata/sanyo-washing-machine-service-centre-kolkata

May 10, 2016 | Washing Machines

1 Answer

My NEC Millennium 892 is displaying E9 and sounding alarm when I start operation. Can you tell me what this means pls. Adam Pinner


You can read up on it, its a pressure sensor,, check the connection around pressure sensor or replace it, if you can't call a repair man.

Jul 09, 2015 | Washing Machines

1 Answer

My NEC NW 652 washing machine is showing an E9 fault. When I hit the power button the E9 message appears?


Sounds like the water level pressure sensor is not working. The code (E9) means the switch is open.


You'll need to replace the pressure switch. Check the manual for the repair procedures.

Apr 25, 2014 | Washing Machines

1 Answer

E9 message and machine stops


Jayshree, E9 error, pressure sensor error/water sensor error.
Replace water level sensor. The error display disappears if power button is turned off and on.This is what the service manual states.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Daewoo DWD M103 Service Manual Page 15 of 16
Daewoo CV701PC Service Manual Page 26 of 52
Daewoo Washing Machine Error Fault Codes
Washing Machine pressure switch

Apr 20, 2014 | Daewoo DWD M1031

7 Answers

My AW-1170S toshiba washing machine was showing error code E9-5...what does it mean?


my AW-1170S toshiba washing machine was showing error code E7 -4...what does it mean?

Nov 13, 2010 | Washing Machines

2 Answers

My washer is showing error 20 and will not spin the water out.


Either drain is clogged or pump is jammed or faulty.
Clear drain and screen. Check pump for jams. Make sure there is power going to pump with a voltmeter.
If you have any other questions, feel free to ask.
Here are some diagrams, tips, and more if you need them.

www.repairclinic.com/RepairHelp/RepairHelp.aspx

www.acmehowto.com/howto/appliance/washer/washer.php

home.howstuffworks.com/how-to-repair-a-washing-machine.htm

Oct 29, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

NEC NW 892 Errror E9


This error is related to the pressure sensor


check connections or replce pressure sensor

Check at the water source end of the hose and make sure the filter is not occluded. Both hot and cold. more likely the cold side as the hot water may disolve the particles more easily.

If all else seems good you will have to replace the sensor

Aug 01, 2009 | Washing Machines

2 Answers

My NEC NW 652 washing machine is showing an E9 fault. When i hit the power button the E9 message appears


E9 means the waterlevel sensor is defective or the pipe connected to it is faulty.

Jan 13, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...