Question about Audio & Video Receivers

1 Answer

SX-1600 + KD-491F

Hello,
I have an old SX-1600 Pioneer stero receiver that has a short in it. Had it shipped off to repair; it worked ok for about a year. Now it's doing the same thing. I need something to run my Kenwood KD-491F turntable. Although I have the Kenwood, all other components are Pioneer and I would like to keep it that way. Have contacted Pioneer twice with no response. Purchased a new receiver a couple of years ago, but it wouldn't run the turntable. The store graciously took it back.
Two options: Find a reputable, experienced repairman. Or, someone clue me in on what new Pioneer model will run the turntable.
Thank you, KB

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi again,

It would seem that you posted the problem here also. With your kind permission, I will repost my excerpts of my responses that others may benefit on similar concerns.

A. Most current receivers no longer include a PHONO input. Perhaps what could be done is to purchase a phono to line level pre-amplifier to go along in your purchase for a new receiver.

I was made to understand that the Pioneer SX-1600 is prone to speaker output problems which could either be:
1. the speaker relay (protection); and/or
2. the amp, STK4191II Stereo Module.

Either should be relatively easy to work on and perhaps you can try the services of a locally available qualified electronic technician since the repairs would not be too specialized. The service manual may be of help (or at least a schematic , they may be downloaded from here and here).

B. To recap what you need is a receiver that can accommodate:
4 - Pioneer S-DF1-K (15-100W, 8 ohms)
1 - Pioneer PD-F407 25 Disc CD Player
1 - Pioneer CT-300 dual tape deck
1 - Kenwood KD-491F turntable

C. Possible choices are (keeping in mind that the power output should be less if not equal to 100 watts and a turntable/phono input):
i. Onkyo TX-8522 Stereo Receiver;
ii. Yamaha RX-397 100 Watt Natural Sound AM/FM Stereo Receiver;
iii. Sony STR DE695 AV receiver;
iv. Teac AG-790 200 Watt Stereo Receiver;
v. Denon AVR 888 - AV receiver - 7.1 channel.

Some of the above also includes feature(s) to hook up to your video system. Some may even require a fifth speaker (subwoofer).

Incidentally, you can also choose another brand/model even without a turntable/phono input. As initially posted, a turntable/phone to line level pre-amplifier is only required. Here are some examples:
a. XP200 Turntable Preamp - Nano Series;
b. Pyle® Pro PP999 Phono Preamplifier;
c. Pro-Ject Phono Box Turntable Preamplifier;
d. Radial J33 RIAA Turntable Preamp Direct Box

Good luck with your project.

Posted on Apr 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello - Our Pioneer vsx-305 display screen doesn't light up anymore and we are unable to get it to work even though the on/off button appears to operating correctly (red standby light comes on). T


It is likely failing due to age.Cold solders fail, corrosion can cut a connection, a capacitor can harden and fail... a myriad of things can happen in time. Repairing it will cost more than an inexpensive replacement. The same receiver can be had on ebay from $60 up (with shipping). It is a cost benefit issue at this point.

Jan 10, 2013 | Pioneer VSX-305 Receiver

1 Answer

Hello, I have an old SX-1600 stereo receiver that has a short in it. Shipped off once already to be fixed. It worked ok for about a year. Now, it's doing the same thing. Don't know where to send it...


Hi,

Most current receivers no longer include a PHONO input. Perhaps what could be done is to purchase a phono to line level pre-amplifier to go along in your purchase for a new receiver.

Will scout around for receivers and post back additional information.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Apr 29, 2008 | Audio & Video Receivers

1 Answer

Blown Fuse / SX - 205 / Pioneer reciever


Check the area where the fuse was...it's usually marked on the board or next to the fuse holder. Check the size also, 2 types 5x20mm or 1/4x1 1/4 in. Usually slow blow.

Mar 30, 2010 | Pioneer SX-205 Receiver

1 Answer

Pioneer Receiver SX-205 flashing ''overload''? Nothing in owner's manual troubleshooting chart.


usually it is a technical indication of the output being shorted. disconnect all speaker wires and try again. still blinking?

Mar 06, 2010 | Pioneer SX-205 Receiver

1 Answer

Hello I have a Pioneer SX-315 and the power shuts off after 10-30 seconds what is wrong with this unit


try to reset the unit, i dont know how to reset but you can ask some expert, hopefully it works!!

Jan 15, 2009 | Pioneer SX-315

1 Answer

PUT A BLET ON TURNTABLE FOR KEENWOOD KD-491F


The belt normally wraps around the bottom of the metal platter. Put the platter back on the turntable, and you'll see holes on opposite sides of the patter. Just pinch the belt out a little, and wrap around the motor shaft - should be a brass shaft assembly.

- OPTiC
Turntable Repair Expert
Digital Analog Therapy

Dec 13, 2008 | Audio & Video Receivers

1 Answer

Direct TV remote codes for SX-315


hello i have a pioneer sx-315 it plays great but the sub performs badly.they sound is very low.they really need to perform better.if anybody know any sub that work better please let me know.

Nov 20, 2008 | Pioneer SX-315

1 Answer

Pioneer SX-450 Receive: Left Channel is not working. The reason is a short circuit (cable)on an Exi tof the Channel. Thank your.


Hello. Receiver is been repared. I was told that a transistor and some resistors falled aut.
Thank you for assistance.
Regards,
Vladimir

Nov 03, 2008 | Pioneer Audio & Video Receivers

2 Answers

I just bought an old vintage pioneer sx 737 receiver and cannot get NO fm reception, and only 2 or 3 on am....HELP!!!!! I have used antennas as well...Charlie


Even with just a short wire, this model should be receiving a number of stations. Is there an IC inside marked LA7001 or something similar? If so, it is probably defective. This is a common failure. I'll look up your specific model later to confirm.
Dan

Jun 01, 2008 | Pioneer Audio & Video Receivers

1 Answer

SX-1600 + KD-491F


Appreciate the additional information.

To recap what you need is a receiver that can accommodate:
4 - Pioneer S-DF1-K (15-100W, 8 ohms)
1 - Pioneer PD-F407 25 Disc CD Player
1 - Pioneer CT-300 dual tape deck
1 - Kenwood KD-491F turntable

Possible choices are (keeping in mind that the power output should be less if not equal to 100 watts and a turntable/phono input):
i. Onkyo TX-8522 Stereo Receiver;
ii. Yamaha RX-397 100 Watt Natural Sound AM/FM Stereo Receiver;
iii. Sony STR DE695 AV receiver;
iv. Teac AG-790 200 Watt Stereo Receiver;
v. Denon AVR 888 - AV receiver - 7.1 channel.

Some of the above also includes feature(s) to hook up to your video system. Some may even require a fifth speaker (subwoofer).

Incidentally, you can also choose another brand/model even without a turntable/phono input. As initially posted, a turntable/phone to line level pre-amplifier is only required. Here are some examples:
a. XP200 Turntable Preamp - Nano Series;
b. Pyle® Pro PP999 Phono Preamplifier;
c. Pro-Ject Phono Box Turntable Preamplifier;
d. Radial J33 RIAA Turntable Preamp Direct Box

Good luck with your project.

Apr 29, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

879 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68153 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...