Question about Mitsubishi VS-50805 50" Rear Projection Television

1 Answer

MITSUBISHI VS-50801 50" TV

When i turn on my mitsubishi vs-50801 it comes on with a distorted picture, the sides of the picture curve to the center, a little like a distortion mirror at a carnival, it plays for 5 to 30 minutes, then shuts down but still has sound, it tries to come back on, but shuts picture down and will not come back. What may be the problem, and is it worth the cost of repair?

Posted by on

  • O2RV Apr 29, 2008

    How do i repair bad convergence ic on Mitsubishi vs-50801

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 186 Answers

Bad convergence IC possible - It's cheap if you do it your self, expensive if you take it to a repair shop. My Toshiba finally came on and stayed on after the IC's burned completely up and smoke poured out the back. Then mine stayed on with a distorted image. A good place for parts -> http://www.electronix.com/catalog/default.php/cPath/6

Posted on Apr 29, 2008

  • Scott
    Scott Jun 12, 2008

    It's on the motherboard of the tv in a horizontal fashion usually with heatsinks attached - you might might acquire the help of a skilled soldering person if you are unfamiliar with this. There shouldn't be any high voltage in this area but still use caution if you work on it.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mitsubishi VS-50801 rear projection TV that has a very distorted and glichy picture


Ur tv convergence are dead.Ur tv convergence board require changing the 2 STK convergence ICS,and some or all it resistors.The shop will cost u $300-$350 for parts and labors.

May 19, 2010 | Mitsubishi VS-50805 50" Rear Projection...

1 Answer

Mitsubishi VS-55609 distorted Picture Flickers


Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs. To get fixed either call in a local TV repair company or goto sites such as Tv Repair Kits to get a repair kit with instructions. Here is there link.

http://www.tvrepairkits.com/xcart/home.php?partner=papa1dude

They have put together complete kits for most models that include the parts, step by step photo instructions, repair assistance, etc.

May 14, 2010 | Mitsubishi VS-5059 50" Rear Projection...

2 Answers

Mitsubishi VS-55609 distorted Picture Flickers


This is a convergence problem and not really a DIY Many amateurs try it to save money but end up spending more on it than a professional. There are dozens on here that managed to fix it for a day or two only to have it fail again.

cost of fix about $300.

Please rate my help++++Thanks for using FIXYA

Mar 24, 2010 | Mitsubishi VS-5059 50" Rear Projection...

1 Answer

Gradually lost picture; Mitsubishi VS-50501A


you need to buy a new lamp and replace the old one thats your only problem its about $200 for the lamp

Mar 27, 2009 | Mitsubishi VS-50501 50" Rear Projection...

1 Answer

Skewed picture


you need ned convergance chips

Mar 22, 2009 | Mitsubishi VS-60621 60" Rear Projection...

1 Answer

Distorted picture,After power loss


Replace both STKs covergence chips 392-56or 570s use same STK numbers.

Dec 12, 2008 | Mitsubishi VS-50805 50" Rear Projection...

1 Answer

Mitsubishi VS-4561 picture curved inward


Its Your Convergence Chips!. And Maybe a few Resisters!. Common Problem with this kind Of Set!.....

Jun 30, 2008 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

Mitsubishi VS-60111 picture distorted


how do I manually switch my t.v. from 480i to 1080i on dtv with remote.

Dec 31, 2007 | Mitsubishi VS-70707 70" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-50805 50" Rear Projection Television Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...