Question about Mitsubishi WD-62827 62" Television

1 Answer

Re: black line across the top of screen!

Tv shows a black line across the top of the screen...its very annoying...yet dunno how to resolve the issue...i saw that there is a software update available for the wd-62827...where can i get info on updating the software?    please HELP!!!   thanks

Posted by on

  • taheard1 Apr 29, 2008

    help!!!!    need solution to fix that line running across the top of the screen.....HELPHELPHELP!!

  • taheard1 May 10, 2008

    its is there constantly n wont go away ...even after warm up...its jus a faded black line running across the top of the screen..tho the pictures is excellent **** as for that line running across the top its not worth watching at all!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

Is it a bias line or is it there constantly? A biased line goes away as the set warms up and that could be caps in the digital board. If it's there all the time the LE or color wheel could be bad. Need a bit more information on this to be helpful.
Bill

Posted on May 07, 2008

  • Paul Omaha Nov 26, 2011

    I have the same issue with my DLP. Top 1 to 2 inches of the screen has a grey hue over the picture. The rest of the picture is great, particularly with the new blue ray. Any suggestions on how to resolve the issue would be appreciated.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Toshiba 42H81 - Screen flicker


Since the problem initially would correct itself, it suggests a poor connection somewhere that "heat" would resolve. If you can solder, try resoldering any joints that appear to be grainy or have rings. Please note that these sets will retain high voltages that can be dangerous even when unplugged. If the resoldering fails to resolve the problem, let us know and we'll look further.

Thanks,
Dan

Dec 31, 2008 | Toshiba 57H81 57" Rear Projection...

1 Answer

Mitsubishi DLP WD 52525 has small green lines on the screen


do the lines go from top to bottom, and are they about 1 inch apart? or do they move diagonally across the screen?

Dec 27, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Horizontal Lines scrolling on screen


I had a similar issue with my Mitsubishi HD 1080. My power supply went out, I had it replaced and it works like new. However, just today I had AT&T U-Verse installed. When the cable guy was showing me the new HD channels all seemed good. This evening (about 5 hours after being installed) I started seeing these horizontal lines across my screen. The picture was still HD quality, but those annoying lines just wouldn't go away. Anyway, after reading a few blogs on-line suggesting interference or bad grounding, it hit me!!! The AT&T guy who installed my U-Verse (cable, internet and phone) had set the modem on top of my TV!!! It was just starring at me this whole time. So I removed the modem off the top of my TV and put it on a side table just to see what would happen and sure enough the lines were gone!!! You may not have the exact same problem, but it may be some type of interference (cell phone, modem, etc, either on top or around your TV that is causing the issue... Hope this helps. Thanks.

Oct 31, 2008 | Televison & Video

1 Answer

APPROXIMATELY 3" GRAY LINE ACROSS THE TOP OF MY TV


Do you happen to have a cable box? (reset cable box also by unpluging it). is that line also showing on dvd player on different input?

Jul 01, 2008 | Toshiba 50HM67 50" HDTV

1 Answer

Black line across screen


I have a line across my rca tv at the top. 52" rear projection. Any ideas? Could it be the mirror?

Apr 29, 2008 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

JVC TV 27" Black line on top of screen


This is for the original problem.. Not the second post.

It's a problem in the horizontal deflection circuit. The parts will be available, but you will be in for some daignostic repairs also to find out why it failing or if it has failed on it's own.
There should be a few caps near the IC (an LA7840) that could also be causing the problem. Click the link, it will make it easier to locate the part inside.

This is the kind of repair best left to a TV tech, but get it done now and it won't cost anywhere near as much as it will later.

Apr 18, 2008 | Toshiba 42H81 42" Rear Projection...

1 Answer

Thin red horizontal lines across screen


replace the focus block or try to adjust the screen control on the focus block for red only. this will affect the white balance of the set so adjust it carefully. the focus block is located on the front inside the set. remove the speaker cover then the 4 screws on the front plate. the focus block is 3" x 2" black box with 6 adjustment posts three for focus and three for screen. adjust only the affected screen (R).

Mar 13, 2008 | Sony Grand WEGA KDP-57XBR2 57" Rear...

2 Answers

JVC A56P575


In the customer menu page thru it until you come to a page that has an item called convergence. move the cursor down to hightlight this and press enter. The next screen will have an Auto on the top line and a Manual of the second line. Hightlight the auto and press enter. The TV will attempt an automatic convergence alignment. BE WARNED>>>It will either correct it or make it worst. If it gets worst then the TV's convergence circuit has aged and is starting to fail. If it corrected it it's the same aging but not as bad, YET. If there is no change or it got worst then you will need to have the TV serviced preferbly by an authorized JVC service center because they have access to the service literature and buttetins.

Oct 08, 2007 | JVC AV-56P575 56" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62827 62" Television Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69718 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...