Wont come out of demo mode - Lowrance Globalmap 5300c Igps 5" Screen Chartplotter With Internal Antenna

try this,,,settings>storage>apps> demo video> disable

or this,'
Tap on Apps in home screen - Settings - Storage - Internal Storage - Apps - Scroll down and Identify "Demo Video Application" under the apps list .

Tap on Clear Cache and tab on "Disable", Ignore the warning message.
Note: Cust may see the "Demo mode" icon in the homescreen, however it wont bringup Demo Video

Your tablet is stuck in demo mode, to reset the demo mode shut off the tablet, keep pressed at the same time power+volume up buttons, the tablet will boot in recovery move, the last selection of the menu is the demo mode feature 0n/off

Please follow the below mentioned procedure to disable Demo Mode in Acer Iconia Tablets.
Tap on Apps in home screen - Settings - Storage - Internal Storage - Apps - Scroll down and Identify "Demo Video Application" under the apps list .

Tap on Clear Cache and tab on "Disable", Ignore the warning message.
Note: Cust may see the "Demo mode" icon in the homescreen, however it wont bringup Demo Video
Regards


How can get out from Iconia A1 810 DEMO Mode

I found the answer at last. Despite instructions to fiddle around with the reset button and arcane combinations of buttons to press on start up, in my PRS-T2 the demo mode is controlled by a check box in the settings menu.

Touch "Applications" > "Settings" > "System Settings" >"Demo Mode" (turn the check box off) and you are done.

What you do mean, is it not activated?

Press the volume knob to bring up [FUNCTION]. Turn the volume knob to select [DEMO MODE] and press the knob. Turn the knob to select [OFF]. Press the curved arrow button to the left of the knob to set it.

If you need a manual you may download a copy here. Demo mode instructions are on page 6.

you put something in the blue input thing
that puts the stereo in demo mode

there is a button on the left side that says "-demo" on it. hold that button until it stops...

The manual says "while in standby mode, press and hold the '3' key on the keypad for 3 seconds until 2 tones sound and the 'DEMO' icon appears. Repeat to turn demo mode off."

You can download a copy of the manual here:

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%208206572.pdf

you have to be in standby mode, thats the key, i had the same problem, just go to "demo on" and change it to "demo off"