Question about Computers & Internet

3 Answers

Poor east west correction on fenice f28ac monitor

Posted by on

  • 4 more comments 
  • bowlandpirie Apr 29, 2008

    Sorry mate, this model does not have any front panel buttons. I think you are referring to the f28atc.

  • bowlandpirie Apr 29, 2008

    I have poor east west correction on a fenice fc28ac monitor

  • bowlandpirie Apr 29, 2008

    That's correct. This model has no external controls and no infrared remote function.

  • bowlandpirie Apr 29, 2008

    There is no discolouring as is typical of faulty degaussing cct. I have changed many suspect electrolytic caps with no joy. Transistors tok. Have not tried TDA8145, will advise you when I get one.

  • bowlandpirie Apr 29, 2008

    I have a problem with the serial number. The label indicated by Fenice Has no serial number, and the serial number on the rear of the case does not compute with Fenice. Oh ****

  • bowlandpirie Sep 30, 2008

    I contacted fenice technical support and they were very helpful.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Often, east-west problem could be corrected by degaussing. I am not familiar with your monitor/model but on some other monitors, degaussing could be activated either by a feature button / menu or by simply powering the monitor off/on. Of course, it is also possible to use an external degaussing coil to force correct any discoloration. Often, metal objects near the sides of the monitor can likewise compound any of the discoloration. If you suspect that it is an internal fault, then possibly it is a capacitor that has degraded, leaked or blistered or worst an active component such as a TDA8145 IC which performs two (2) functions, both for east-west and pin-cushion circuits.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Apr 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 377 Answers

Theres no button or setup setting to push on the monitor..?

Posted on Apr 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Ahhh..that's in the menu settings on front of panel of monitor...should be easy to access..

Posted on Apr 29, 2008

  • 2 more comments 
  • Patrick Michaels
    Patrick Michaels Apr 29, 2008

    here's a link to find instruction sheet(might be in Italian, of course)..

  • Patrick Michaels
    Patrick Michaels Apr 29, 2008

    well..then..the link shows all the monitors that company makes..and none of them match with the part number you quoted..hope you find what you are looking for.

  • Patrick Michaels
    Patrick Michaels Apr 29, 2008

    please provide the serial number, so we can get you some information on this..that's what the link that I supplied requires..if you truly want this resolved, that is.

  • Patrick Michaels
    Patrick Michaels Apr 29, 2008

    well..that is quite interesting...hope this resolves well for you ..

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

EAST/WEST CORRECTION


Enter the menu and choose initial setup.

For Vertical correction choose VERTICAL POSITION and make adjustments.

For East West, the menu will only be available if the incoming signal is 480p.
If it is you will see a choice for DIGITAL IN and select a size.

Jul 30, 2011 | JVC AV-61S902 61" Rear Projection...

1 Answer

Just got my husband a casio pro trek sgw100-1 - we calibrated the compass but east and west are switched - north and south are fine - any ideas? thx


As a pure shot in the dark, are you sure that you calibrated it so that it was pointing to the north when it should be and not to south?

If it was pointing south instead of north, then East and West would be reversed.

Sounds a bit daft but better than the directions of east and west changing?

Check your calibration perhaps?

Nov 29, 2010 | Casio Watches

1 Answer

What is the zip code of london?


London postal districts are correctly prefixed with the post town 'LONDON'.

London postal district | London East Central
EC1 Head District | EC2 Bishopsgate | EC3 Fenchurch Street | EC4 Fleet Street

London postal district | London West Central
WC1 Head District | WC2 Strand

London postal district | London North
N1 Head District | N2 East Finchley | N3 Finchley | N4 Finsbury Park | N5 Highbury | N6 Highgate

N7 Holloway | N8 Hornsey | N9 Lower Edmonton | N10 Muswell Hill | N11 New Southgate | N12 North Finchley

N13 Palmers Green | N14 Southgate | N15 South Tottenham | N16 Stoke Newington | N17 Tottenham

N18 Upper Edmonton | N19 Upper Holloway | N20 Whetstone | N21 Winchmore Hill | N22 Wood Green

London postal district | London North West
NW1 Head District | NW2 Cricklewood | NW3 Hampstead | NW4 Hendon | NW5 Kentish Town | NW6 Kilburn

NW7 Mill Hill | NW8 St John's Wood | NW9 The Hyde | NW10 Willesden | NW11 Golders Green

London postal district | London East

E1 Head District | E2 Bethnal Green | E3 Bow | E4 Chingford | E5 Clapton | E6 East Ham | E7 Forest Gate | E8 Hackney | E9 Homerton | E10 Leyton | E11 Leytonstone | E12 Manor Park | E13 Plaistow | E14 Poplar | E15 Stratford | E16 Victoria Dock | E17 Walthamstow | E18 Woodford
London postal district | London West
W1 Head District | W2 Paddington | W3 Acton | W4 Chiswick | W5 Ealing

W6 Hammersmith | W7 Hanwell | W8 Kensington | W9 Maida Vale | W10 North Kensington

W11 Notting Hill | W12 Shepherds Bush | W13 West Ealing | W14 West Kensington

London postal district | London South East
SE1 Head District | SE2 Abbey Wood | SE3 Blackheath | SE4 Brockley | SE5 Camberwell | SE6 Catford | SE7 Charlton

SE8 Deptford | SE9 Eltham | SE10 Greenwich | SE11 Kennington | SE12 Lee | SE13 Lewisham | SE14 New Cross

SE15 Peckham | SE16 Rotherhithe | SE17 Walworth | SE18 Woolwich | SE19 Upper Norwood | SE20 Anerley

SE21 Dulwich | SE22 East Dulwich | SE23 Forest Hill | SE24 Herne Hill | SE25 South Norwood | SE26 Sydenham

SE27 West Norwood | SE28 Thamesmead

London postal district | London South West
SW1 Head District | SW2 Brixton | SW3 Chelsea | SW4 Clapham | SW5 Earls Court

SW6 Fulham | SW7 South Kensington | SW8 South Lambeth | SW9 Stockwell | SW10 West Brompton

SW11 Battersea | SW12 Balham | SW13 Barnes | SW14 Mortlake | SW15 Putney

SW16 Streatham | SW17 Tooting | SW18 Wandsworth | SW19 Wimbledon | SW20 West Wimbledon

Jul 12, 2010 | Office Depot Ativa Wireless-G USB Network...

1 Answer

I changed the Navigation disc to west side and can't get it to accept the east side navigation Disc? Is it possible? How?


eject the disc and reset the radio. then try to insert the east coast disc again. should work again after reset

Feb 06, 2010 | Pioneer AVIC-N2 DVD/CD/navigation receiver...

5 Answers

Sony KV27EXR15 picture has an hour glass shape


Hi,

This issue is the scan correction or East-West control
You see as the set tube gets bigger so their is a greater need to control the scan
This is achieved by incorporating an East-West correction circuit and its here where the fault lies
You have dry/cold joints in this area which may have got that poor a contact that it no longer makes
Also the poor joints could have damaged the transistors or loading coils in that area too
Its a none do-it-yourself, i am afraid due to the job being done right first time otherwise if something is overlooked it would lead to the new devices failing again!
A technician would probably charge $90-$100 for this repair


Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Oct 01, 2009 | Televison & Video

1 Answer

Find the magnitude of the velocity of the canoe relative to the r


Firstly, though the answer is expressed as an angle "south" of west, the canoe will be traveling southeast, so the degree should be read south of east, not south of west. The ultimate velocity of the canoe will me 1.065 m/s.  The direction is 22 degrees south of east, or 158 degrees from West, but not 158 degrees south of west, since beyond 90 degrees south of west you have south. I used trig and I passed calculus so I'm pretty sure i'm right.

Dec 02, 2008 | RTO 14 Foot - Strip Built Wood "puddle...

1 Answer

Rca f35670mb


hi there.im not familiar wih the model,but your fault lies in the east west correction circuit.excessive width usually means a short circuit e/w modulator diode,with the curved sides.normally,a narrow picture with curved sides points do dry jointed/open circuit polyester capacitor.if a firm slap has an effect,then its most likely a dry joint which makes for an easy life.the vast majority of east west correction circuits are based in tle line output stage,and generally not complex to fix.hope this helps,regads,steve.ps. look for s/c by 299 and by 228 diodes,check those..

Nov 05, 2008 | RCA F35670MB 35" TV

1 Answer

Display monitor


dear sir
bind is connected to east west ,,if you cannot control it contro pannel you have to change 630 trasistor,, it may have a leke or solder lose

Oct 30, 2008 | LG Studioworks 700S 17" CRT Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...