Question about Washing Machines

Open Question

Simpson encore 605 fault code are as follows all lights flashing altervently no buzzer then nothing. machine was half way though spin cycle when this happened and nothing since. thankyou

Posted by on

6 Suggested Answers

supertech6
  • 513 Answers

SOURCE: Simpson Encore 605 - belt sometimes squeals during spin

Many washers squeal when spin starts. A new belt usually solves it. A bit of belt dressing for car fan belts works wonders. **unplug it while you apply belt dressing!
There is usually a tension adjustment by moving the motor mount back a small amount. Don't over do the tension.

Posted on Apr 02, 2010

  • 713 Answers

SOURCE: simpson encore 605 wash machine 6kg. Washer pump

Hi mark just read your posting.Now what country do you live in.If you live in Australia then I can give you some phone numbers.Regarding your machine it does sound like the control board.Probably the power supply section of the board is faulting.Please reply with additional information and I can help you further.

Posted on Jun 19, 2010

Testimonial: "Nice reply with information to put me in contact with someone who may have parts. Thanks. I await some more contact phone numbers."

  • 713 Answers

SOURCE: Half way though washing load and the machine just

Hi just read your posting.Good to hear from someone in Australia.I assume you are in Australia being a Bronco"s fan.Now to your machine.Did you check the power point with a small appliance such as a toaster ?If you have power to the machine and it does not power up then the fault could be either your ON/OFF switch or your computer board is faulty.Is your machine the model with all the buttons instead of a timer knob?Have you or can you borrow an electrical test meter to test the switch?Please reply with the additional information on the questions and I am sure I can help you further.

Posted on Jun 29, 2010

blueextc3221
  • 15935 Answers

SOURCE: simpson encore 605 won't start

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question !!!!

Posted on Sep 18, 2010

  • 6277 Answers

SOURCE: Looking or a service manual

Hi from retired Englishman in SW France,
Unfortunately this forum does not supply any type of manual, installation instructions, electrical or schematic diagrams direct; it's just made up of ordinary guys and gals, probably at home and from all over the world, with experience of addressing problems and giving guidance for free on the web ;-0)
You will need to type into your search engine/web browser '(make) washer service manual' and you may be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!
May I also suggest you try the manufacturer's web site direct? You may find, however, that it will supply schematics only to service engineers but good luck anyway.
John C.

Posted on Mar 21, 2011

mpcheeseman1
  • 1400 Answers

SOURCE: simpson encore 605

Sounds like a motor transmission problem.190.00 parts and labor is not a bad price.
Check if there is a warranty with the new parts the service person is installing.

Posted on Oct 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washing machine goes fine until half way through wash then comes up with error code PU and beeps until I turn it off...will not drain out the water? Simpson encore 556


simpson encore pu Unsolved Problems - Fixya

www.fixya.com/unsolved_problems/simpson_encore_pu
Unsolved problems for simpson encore pu question. Get free help ... My simpson encore 757 shows PU error code. What is this? ... Simpson encore 556. Aug 22 ...

Sep 10, 2015 | Simpson Washing Machines

1 Answer

What is fault FF ON 605,simpson


could b brushes in motor or capasitor

Apr 09, 2015 | Simpson Washing Machines

1 Answer

Why is there an 'SF' code showing and continuous beeping from our Simpson encore 756


there are different sf codes for different faults. try googling the sf number fault to find problem.

May 25, 2014 | Washing Machines

1 Answer

Simpson encore 605 fault code are as follows during wash process stop suddenly, strat to beep and all lights are gone except the Maxi light . It flashs while beeps


Hi, my Simpson encore 605 wash machine wash on the half way keeps beeping, and the maxi is keep flashing. What kind problem it is?
Cheers!

Feb 12, 2012 | Washing Machines

1 Answer

Simpson encore 605


Sounds like a motor transmission problem.190.00 parts and labor is not a bad price.
Check if there is a warranty with the new parts the service person is installing.

Oct 27, 2011 | Washing Machines

1 Answer

SIMPSON 816 ENCORE WASHING MACHINE ERROR MESSAGE


Hello

Try running the washer through rinse/spin cycle,then normal cycle without any detergent.

SF is suds failure,or too much detergent or wrong type of detergent.You need to use H E type detergent.

This should clear the machine out.

Apr 01, 2011 | Electrolux Washing Machines

1 Answer

Simpson encore 605 wash machine 6kg. Washer pump


Hi mark just read your posting.Now what country do you live in.If you live in Australia then I can give you some phone numbers.Regarding your machine it does sound like the control board.Probably the power supply section of the board is faulting.Please reply with additional information and I can help you further.

Jun 19, 2010 | Washing Machines

1 Answer

Simpson Encore 605 - belt sometimes squeals during spin .What maintenance should I do? Spins fine - just squeals from time to time.


Many washers squeal when spin starts. A new belt usually solves it. A bit of belt dressing for car fan belts works wonders. **unplug it while you apply belt dressing!
There is usually a tension adjustment by moving the motor mount back a small amount. Don't over do the tension.

Apr 02, 2010 | Washing Machines

2 Answers

Simpson washing machine encore 756 displays error df and will not complete cycle


our simpson encore 756 flashes SP can anyone tell us what it means and how do we fix it thanks mark

Aug 03, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...