Question about Sony KDSR50XBR1 50" Projection HDTV

1 Answer

Need to replace the lamp - Sony KDSR50XBR1 50" Projection HDTV

Posted by on

  • Anonymous May 29, 2008

    picture real dark on my 60in. sony brightness turned all the way up

  • Anonymous Jul 18, 2008

    same problem, replace lamp

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

How do I install the new laMP IN THE CASING??

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an amana convection/microwave model acm1580as that needs a lamp replaces. I bought replacement lamp and after practically tearing appliance apart I located burnt out lamp. Now I don,t know how to...


Hi, since you have located the burnt lamp, all you need to do is to unscrew the burnt lamp and replace the new one by screwing it in.....
You only need to unscrew to remove the lamp and if you cannot remove by unscrewing because it is stuck in, then you need the assistance of an electrical tech to help remove with his pliers....

Mar 26, 2011 | Amana ACM1580 Convection Microwave Oven

4 Answers

Need to reset lamp. replaced lamp and installed new lamp.


Press RESET, <, >, ENTER keys on remote within 5 seconds to reset lamp timer.

Jul 29, 2010 | Sony VPL-CX86 Multimedia Projector

1 Answer

I have a 50" Sony Wega, the lamp has blown out, I have the lamp and now need to replace the lamp,, I have turned the TV around and I'm facing hit head on,, How do I replace the lamp..? Do I need to remove...


Look in the user manual on lamp replacement. Usually a door held by one screw on right side (when facing front of TV), or behind lower front panel IF removable.

Apr 13, 2010 | Sony KDF50E2010ATNS 50" HDTV-Ready LCD TV

1 Answer

Why does it say replace lamp


Have you replaced the lamp? If so did you reset the lamp timer?
If no to number 1 then you need to replace the lamp they are only good for 1000-1500 hrs then need to be replaced before the blow out all together.

Feb 17, 2010 | Sony VPL-ES4 Projector

1 Answer

Replaced lamd power and lamp light are green for


Yes you need to replace lamp,so you buy a new lamp.

Dec 14, 2009 | Sharp Notevision PG-A10X Multimedia...

1 Answer

When I turn on the TV, nothing comes on. No pictures or sound. Red light comes on where it says lamp. Do I need to replace the lamp. Please kinldy advise . Ty


Yes. You need to replace the lamp. Mine did this when my lamp burned out.

You can try pressing <menu> and <device> at the same time, and you'll get a code flashed out to you (tens digit followed by unit digit). You'll likely see one of the following codes:
  • 34 Lamp abnormality
  • 36 Lamp Ballast or exhaust fan failed.
  • 38 Lamp temperature too high
  • 42 Lamp Fan Failed
But the user's manual and the repair manual both say that a red lamp light means your lamp isn't working (most likely it needs to be replaced).

May 10, 2009 | Mitsubishi WD62627 62" HDTV

1 Answer

Need to replaced lamp


The easy way to confirm if it is the bulb. Unplug the power to the TV. Remove 2 screws that keeps the lamp cover in the TV. (see manual on lamp replacement). This is on the left side of the TV. Then remove the 2 screws that hold the lamp unit in. Pull out the lamp unit by the handle and then look at the lamp. If it is broken, you will need to replace the lamp.

Dec 03, 2008 | Hitachi 50VF820 Projection TV

1 Answer

Sony 42'' kdf42we655 no picture , lamp light flashing


If the lamp light is flashing, yes you need a new lamp. Be sure to buy an original Sony lamp as the replacement lamps are garbage and are not worth the discount. Please rate this solution. Thanks!

Nov 15, 2008 | Sony KDF-42WE655 Television

1 Answer

LAMP


Replace the lamp. In rare cases, the lamp power supply or lamp ballast may also need replacing. But, replace the lamp first, and use an original Sony lamp not a cheap aftermarket replacement. If this helps, please be sure to rate the fix! Thanks!

Oct 21, 2008 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

How to reset lamp timer


Go to the menu and you'll find lamp timer section.

Aug 27, 2008 | Vivitek V37835 46 in. LCD Television

Not finding what you are looking for?

Open Questions:

0 Answers

Sony KDSR50XBR1 50 black screen, no faults! Lamp working, fans OK Sony KDSR50XBR1 50" HDTV: The light engine was working fine before the fan quit starting on it's own. After disassembly, cleaning and lubrication of the fan, I have no errors but the input display or menu options will not post on the screen. The lamp is on but seems to either be projecting a solid black picture, or not be at full brightness and there are no faults. I have a solid greed LED on top, but can get no picture. Sound is fine. What should the lamp voltage be at operating mode? I have tried reseating connectors and pushing on the wires to make sure the connectors seat. This is baffelling because the lamp fired fine for 1 second before the stuck fan issue was corrected and I have no faults now after lubricating the fan. I'm going to check connectors again today as a triple check; as I did remove the power supply. The TV has been reset per instructions in the book. Any advice would be much appreciated but I cannot believe it's the OB as it worked fine before the fan quit and it's about 14 months old. I'm thinking something may not be assembeled correctly, but everthing seems to be pretty idiot proof for re-assembly. Also the menu or input banners will not post. I have 2 new lamps, so it's not that.It seems to be stuck in somne black screen mode. The large fan does start by itself now after cleaning and lubrication, therefore no fault blinks. Please help!!!

Mar 01, 2017 | Sony KDSR50XBR1 50" Projection HDTV

Sony KDSR50XBR1 50" Projection HDTV Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

101580 Answers

The Knight
The Knight

Level 3 Expert

71672 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1646 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...