Question about Frigidaire ATF6000ES Front Load Washer

3 Answers

Drum makes loud noise when spinning

Drum now makes a huge loud noise when in spin cycle. just started...front loader frigidaire gallery. seems the drum is "loose" I can move it with my hand back and forth...washer is 10 years old. THanks.

Posted by on

  • 3 more comments 
  • bpgbo Apr 29, 2008

    Thanks! My washer lasted 10 years, this was the only problem. I've read where people had trouble after 3 - 4 years (switches, pumps, etc). This was my only problem, although it's a fatal one.



    Thanks for the quick response!

  • Anonymous May 03, 2008

    I experience the same problem and the repairman told us that the tub is loose and the struts and spin basket is broken, with an estimated cost of $500 - $600.00. I also had a problem with the machine not spinning - twice had to get a repairman to fix, the first time shortly after the purchase, Thank God it was still under warranty, and the other time it happened a year ago.It seems a shame that after 9 years the washing machine is broken. What happened to quality.

  • jacq58 Oct 21, 2008

    anyone know where I can get a manual for the washers?

  • Anonymous Jan 04, 2009

    DRYER MAKES A NOISE WHEN SPINNING ITS A GE ADORA.

  • Anonymous Mar 26, 2014

    need to reach in and turn the drum by hand to get it to start spinning

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

HI thanks for the question. Frigidaire has a life time warranty. on that part .call them. thanks the appliance doc. please rate my answer. thanks.

Posted on Oct 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do you know what # to call for Frigidaire. I think that my bearings may be shoot. Making a lot of noise when spinning and a clunking noise when agitating and a gritty material came out in the water into the wash tub.

Posted on Oct 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 101 Answers

The bearings are worn out ,it's not worth to repair , the fact that your washer is old it's going to have more problems.

Posted on Apr 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?


How To Fix A Washing Machine Making Noise During The ...

removeandreplace.com/.../washing-machine-making-noise-during-the-sp...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle

removeandreplace.com/.../dishwasher-making-loud-grinding-noise-durin...
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

https://www.youtube.com/all_comments?v=v-arYb20kOk


Dec 03, 2015 | Washing Machines

1 Answer

Troubleshooting kenmore washer front loader 417 390 12890


basket rubbing to the door gasket ..could be bad bearing or broken spider

Mar 01, 2014 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

My 10+ yrs old Frigidaire gallery # GLTF1240AS front-loader drum won't agitate/spin


Check and see if the drive belt broke? On mechanical agitators using gears, a solenoid may fail and drive motor won't function.

Dec 23, 2013 | Frigidaire Washing Machines

1 Answer

I have a Fridgedaire Gallery front loader, was making a loud banging noise on spin cycle, now the whole drum has dropped! help!


The symptoms that you describe sounds like the spider arms that support the drum are broken. It is a very expensive repair. Get a few estimates, before deciding whether it is worth repairing or replacing. Sorry.

Oct 06, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Hard bang on spin with my frigidaire gallery frontload washer


Hi,
When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about that...

http://www.fixya.com/support/r3663122-washer_problems_washer_noise_when

heatman101

Apr 15, 2010 | Frigidaire GLTF1040A Front Load Washer

2 Answers

My washer makes a loud noise in the spin cycle. It's a Frigidaire Gallery Washer Model 417.39012890. Any idea how expensive the repair will be?


In my experience with 417 Frigidaires is that when there is a noise in the spin cycle as you describe the drum bearing is failing. This is a very expensive repair that that when I looked up labor and parts could exceed 600 smakeroos.

Feb 14, 2010 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Loud clanking noise during spin cycle. Will not


If it is a front loader, then remove the rear panel, remove the belt, and soin drum by hand, if it feels rough, or is noisy and rumbling, then the main drum bearings have failed.
This is a major repair.

Feb 01, 2010 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

Spin cycle is making loud clunky noise to a frightening degree. Frigidaire Gallery Washer.


Hi,
The drum inner bearing which holds the drum unit will be damaged kindly replace the bearing along with the washer to get rid of noise

Dec 30, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Front loader problems


call repair before warranty runs out...possible door switch if it's a loud humming noise ..try pressing in on door latch side to see it hum changes

Sep 06, 2008 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Washer Stopped Spinning


My Frigidaire front loading washer is less than 2 years old and YES there is a belt, I am going to replace my 3rd belt this week.....the wheel on the back of the drum has moved enough, even after numberous times of tightening, that it has worn a HUGE hole in the back of the drum from the belts. I will NEVER buy another product from them again, due to not standing behind their product and sending a repair man to my home to fix it, then telling me that I will have to replace the drum....(ltf2940es0).
signed
DISCUSTED WITH FRIGIDAIRE!!!!

Dec 17, 2007 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

2,236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...