Question about Mitsubishi WT-42311 42" Rear Projection Television

2 Answers

Front button lock was turn on by accident

How to turn it off?

Posted by on

  • Brunswick26 Apr 29, 2008

    I press and hold the menu button while the tv is off. Turn it back on and it works.It reset it to off. Thanks for the help.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

This model is equipped with a keyboard lock feature; this can be mistaken as a no power condition. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds.

Posted on Apr 29, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

WITH

Posted on Jan 23, 2009

  • tonysurtex Jan 23, 2009

    with the remote press menu ,select "setup", select "front button lock" and change to "off"

  • tonysurtex Jan 23, 2009

    with the remote press menu ,select "setup", select "front button lock" and change to "off"

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wv 344 child lock need this turned off please


Press and hold the 'Child Lock' button for 2 seconds. You will then hear a beep and the child lock should be off..

Mar 03, 2014 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

RCA Truflat TV 27F522T is completely locked both manually and remote do not work. Was working manually but after checking menu for block accidently FPA locked not can't turn on tv at all.


You must have its remote control to unlock this TV. Try to make your remote control get repaired, and check these.
Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.


Jun 28, 2012 | Televison & Video

1 Answer

I accidently locked my citizen tv and I can't access any buttons


Front Panel Lock

This feature allows you to lock the buttons on the front of the TV. Even when the front panel lock

feature is ON, the TV operates with the remote control.

• To lock the buttons on the front of the TV, make sure the TV is turned ON, then press and

hold the ON•OFF button on the remote for approximately 5 seconds.

• To turn off the front panel lock, make sure the TV is OFF, then press and hold the

ON•OFF button on the remote for approximately 5 seconds. Now the buttons will operate
properly.

http://support.ttetech.com/RCATV/Assets/pdfs/E13320_1558177E_IB_e-02.pdf A manual for a similar model if you need it. Many of the controls should work the same. Good luck and please leave feedback!

Oct 10, 2010 | RCA E13309 13-Inch Diagonal XL-100¿...

1 Answer

Washer won't turn on and the light by "control locked" is lit up.


Control lock is a feature to lock your control from anyone changing your setting or stopping the washer from being shut off after you have selected a cycle. There is a subscript under one of your option buttons that says control lock hold for 3 seconds. Hold this button in for 3 seconds or so and the lock should turn off. It was probably pushed by accident or someone was leaning on it. If this doesn't solve the problem please post again.
Please rate this post. Thank you.

Jan 22, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a whirlpool duet sport front load washer. It was running in the wash cycle. I had to cancel the cycle. Now the machine will power on, but when I put the start button it turns itself off. I've t


make sure you havent locked the console by accident it is in small print on the front right of the console other than that you will probably need a technician

May 30, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...

3 Answers

Can't deactivate child lock on washer


Try: Press and hold 'dry' & 'spin', shd unlock OR
Try holding the "end of cycle" button down for 5 or 6 seconds. You must hv done it accidently, it is the child lock device. Pl. rate if helped.

Jan 04, 2008 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

VR3845


On the remote, just above the red "REC" button is a button marked "LOCK". Hit this button and it will unlock the panel. I have hit this button accidently several times.

Oct 31, 2007 | GoVideo VR3845 DVD Recorder/VCR

1 Answer

Just got it (used) power problem?


  1. turn your tv on with remote control
  2. go to menu select front button lock
  3. select off to restore the operations of the front panel operations
  4. the front panel lock is a feature that lets you disable the front panel to prevent children from changing settings by accident
  5. if this doesnt work i would suggest contacting a service repair tech.

Sep 08, 2007 | Mitsubishi WS-55311 55" Rear Projection...

1 Answer

UNLOCKING THE FRONT LOCK CONTROL


hold it in and it will change. mike

Aug 15, 2007 | JVC AV-27230 27" TV

Not finding what you are looking for?
Mitsubishi WT-42311 42" Rear Projection Television Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...