Question about Sony KP-53S65 53" Rear Projection Television

2 Answers

Sony kdf e60a20 - Light is blinking red, blew out the dust on the screens of lampbulb, worked right for a day and a half then started shutting down again, do I need a bulb or the thermal fuse? And if I do need to change the thermal fuse what is the part # & how do I install?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

From the sound, you need to replace the bulb. If you had the television for more then 3 years without replacing the bulb, I would say 100% it's the bulb

Posted on Dec 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

There could be a few issues.here are a list of things that could go wrong plus part numbers you wanted.


pn# 191002393 thermal fuse

pn# a1085447abarc bulb without housing cheaper

clean fans
other things that cause this:
dmd board or light engine my guess would be bulb and thermal fuse. thanks doctor video

Posted on Apr 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm having the same problem with my tv (wega sony kdf e60a20) just like a few other people here, with the sensor cutoff fuse, how do you replace this item?


If you mean the thermal fuse, the set should have a red blink code of 5 blinks. The thermal fuse is way inside on the frame of the lamp housing but can be tested with rear cover removed.

If you have one bad the red blinking light will have to display some code.

Dec 22, 2012 | Televison & Video

1 Answer

Solid red light on sony grand wega kdf-e60a20


it is possible the issue is in the audio circuit===seen a couple with a shorted audio output that did that.

Mar 12, 2012 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Sony tv model kdf 50e2000 shuts off and red light blinks 3 times.


You need to open up set and clean out all fans of dust or the new bulb isnt being cooled, or the color lcd isnt being cooled shutting TV off.

Apr 17, 2010 | Sony KDF-E502000 50" HDTV

1 Answer

Had Blinking RED blinking lights. FIXED


CHECK LAMP COVER, CLOSE IT AGAIN THE RIGHT WAY

Feb 21, 2010 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

Red light blinks 6 times


i have the 42" same problem, i took it down and dusted it out thouroly , light air presure or blow dryer should work havent had the shut down light flashing problem since

Jan 26, 2010 | Sony Grand WEGA KF60XBR800 60" Rear...

1 Answer

Sony KDF-50E2000 shuts down and blinks repeatedly twice.


The 2 blink error is a temperature error and the 6 blink error is a thermal fuse error. You may need to unplug the set and get you a can of canned air, take off the back lower cover and blow out all of the fans inside the set.

Oct 20, 2009 | Sony KDF-50E2000 50" HDTV

2 Answers

Sony wega kdf-e60a20


it works!! First i took off the front panel. Just check your manual for instructions, very easy to do. If you do not have a manual just down load one from google.. The instruction are easy to follow. The screw they have you loosen with a alan wrench is attached to the plastic, so you do not have to worry about dropping it inside the tv. Removing the lamp was simple. once out you will notice on either side are two small mesh screens. One of mine was 80% blocked with dust, the other side was only 30-40% covered. I used a vacuum to remove the blockage, i did not want the dust and dirt to go inside the bulb. i then cleaned all around the lamp. Reinstalled, and we are go to go. The kids are happy and i am happier since my wife not be buying a new TV.
total cost of repair $.00
time required to fix, less than 15 minutes.

Also when my TV was loosing sound and picture and then return. I did turn off my TV, then turned on. I noticed a red blinking light. Mine flashed 5 times. After some reserch, 5 times is video related, bulb or video board. google red flashing light with the model you have and you will find what all the codes mean.
So if yours is flashing 5 times try the above, it might work for you and it is well worth the time before you call a tech and drops hundreds of dollars.

hope this helps.

Aug 22, 2008 | Sony Grand WEGA KDF-60XBR950 60" Rear...

3 Answers

KDF-E60A20


do this for me turn off tv hit the follow hit this button display,5,vol down, power and till me the error code for this set this a have a
cpu in them ever time the led blink on front of set that mean thear is some pu with tv. so chech it and git back to me with code
thank you. bob..

Jun 12, 2008 | Sony Grand WEGA KDF-60XBR950 60" Rear...

1 Answer

60" Sony KDF-E60A20 - Red Light Blinks 6 times


The problem you have is a failed thermal sensor. Depending on how tech savvy you are you can replace it.They have changed the way the thermal sensor looks but it isnt too bad too put in. Any repair shop should also be able to do this for you.

Part number is 1-910-006-44 Themal Fuse Sony Part.

Feb 04, 2008 | Sony Grand WEGA KDF-60XBR950 60" Rear...

4 Answers

KDF-E60A20 Going on and off by itself..no blinking lights


it works!! First i took off the front panel. Just check your manual for instructions, very easy to do. If you do not have a manual just down load one from google.. The instruction are easy to follow. The screw they have you loosen with a alan wrench is attached to the plastic, so you do not have to worry about dropping it inside the tv. Removing the lamp was simple. once out you will notice on either side are two small mesh screens. One of mine was 80% blocked with dust, the other side was only 30-40% covered. I used a vacuum to remove the blockage, i did not want the dust and dirt to go inside the bulb. i then cleaned all around the lamp. Reinstalled, and we are go to go. The kids are happy and i am happier since my wife not be buying a new TV.
total cost of repair $.00
time required to fix, less than 15 minutes.

Also when my TV was loosing sound and picture and then return. I did turn off my TV, then turned on. I nothiced a red blinking light. Mine flashed 5 times. After some reserch, 5 times is video related, bulb or video board. google red flashing light with the model you have and you will find what all the codes mean.
So if yours is flashing 5 times try the above, it might work for you and it is well worth the time before you call a tech and drops hundreds of dollars.

hope this helps.

Dec 05, 2007 | Sony Grand WEGA KDF-60XS955 60" Rear...

Not finding what you are looking for?
Sony KP-53S65 53" Rear Projection Television Logo

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98879 Answers

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...