Question about Sharp HT-DP3000 System

2 Answers

Remote quit working on Sharp HT-DP3000

We've owned the Sharp home theater system for 8 yrs, and last week the remote stopped working. The main unit won't and can't turn on (the main ON/OFF switch only puts it in "standby mode". I've put in new (tested) batteries, cleaned the LED on the remote, and the plastic cover on the theater system's sensor....and no luck. Unfortunately, w/o the remote, this system is as good as a boat anchor - as you can't turn it on (confirmed by the manual).

Anyone (1) have information as to why the remote might no longer send a signal to the sensor, or (2) know where I can get a replacement, or (3) know where the remote could be shipped for repair?

Posted by on

  • tessielin83 Jul 04, 2008

    The remote for my HT-DP3000 has been lost. How can I get it off stand-by with out the remote?

  • Deetheswimme Jul 28, 2008

    Remote stopped working after 8 years and the system will not go off STAND BY. Have tried new batteries, cleaned entire system, and no luck.

    It has power as the red light comes on Stand By but won't move off stand by. We find no way to turn it on other than the remote.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Where or how rather, can I buy the speaker wires with the pin box? I bought this system of a guy from craigslist (for $60) and none of the speakers have wires...

Posted on Jan 03, 2015

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I know this answer is kinda late for the original poster but I have that system and have been using it for more than three years with no remote. All you do is plug it in, the unit should be in stand by mode, then press the large power button on the front off and then on. The unit will click and then power on. :)

Posted on Mar 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The remote for my samsung ht-tx72 doesn't work even though the tv and dvd reciever lights on the remote work. It doesn't turn on my home theater system. Do I need to reprogram it?


Possibly. Maybe it's malfunctioning.

Read this procedure to possibly fix the remote:
http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12963989782821
They also sell replacement remotes.
Zoom in on the picture of the original remote provided on the site (or look at your own) and get the actual remote model number.

or check eBay: search for "(model of the device or the remote) remote", check the 'include description' box. Usually cheaper than the vendors.

Sep 12, 2011 | Samsung HT-TX72 Theater System

1 Answer

Hello, The DVD button is not working anymore and


The remote has its own issues.

http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12963989782821
They also sell replacement remotes.

Zoom in on the picture of the original remote provided on the site (or look at your own) and get the actual remote model number.

or check eBay: search for "(model of the device or the remote) remotes", check the 'include description' box. Usually cheaper than the vendors.

Hardware buttons on devices also fail. There's no magic fix for them. Do other modes select ok?

Jul 19, 2011 | Samsung HT-TXQ120 Home Theater System...

1 Answer

I need to play videos in region 4


check internet for region free codes for your model, this is usually quite easy to set your system to not have any region restriction. so you can play dvd from all regions. I found this for your model.

1. Remove disc from tray.
2. Switch off player and unplug power cord.
3. Wait 30 seconds, then reconnect power cord.
4. Turn on player with remote. Wait for player to finish loading and display 'no disc'.
5. Press enter on remote. (There will be no on-screen response.)
6. Press 8, 4, 2, 6, 9 on the remote. (There will be no on-screen response.)
7. Press enter on the remote. Player will automatically shut off.
8. Turn player on.
9. Turn off.
10. Turn player on then off again.
11. Player is now region-free.

It might work. try at your own risk.

Dec 12, 2010 | Samsung HT-X20 Home Cinema 600W Theater...

1 Answer

Sharp HT-DP3000 reciever don't know how to plug in speakers


Hello, many thanks for your request. I found a quick manual for HT-DP3000, you can download it here:

http://www.tradebit.com/filedetail.php/9120914

(Check out for the green download button on the upper left side)

Aug 31, 2009 | Sharp HT-DP3000 System

1 Answer

Region Free Code for HT-Z310T Samsung Home Theatre


1. Remove disc from tray.
2. Switch off player and unplug from mains.
3. Wait 30 seconds, then reconnect mains.
4. Turn on player with remote. Wait for player to finish loading and display 'no disc'.
5. Press enter on remote. (There will be no on-screen response.)
6. Press 8, 4, 2, 6, 9 on the remote. (There will be no on-screen response.)
7. Press enter on the remote. Player will automatically shut off.
8. Turn player on.
9. turn off.
10. Turn player off then on again.
11. Player is now region-free. 

My brother did this on his ht-z310 and other than I think maybe the traty not openin g when it said it worked fine and his player is now region free.

I got this btw from:

http://www.videohelp.com/dvdhacks?dv...&Search=Search

Mar 25, 2009 | Samsung HT-Z310T Theater System

1 Answer

Remote no longer works volume


Sounds like board under buttons is dirty; I would take the remote apart, clean the board with alcohol & cotton and re-assemble.

Best luck...

Mar 13, 2009 | Sharp HT-DP3000 System

5 Answers

Regional code for dvd player


Reagrding unlock of samsun ht-x715.

Found this
http://www.amazon.com/review/R2FMHKVOZYF6HX/ref=cm_cd_NOREF?%5Fencoding=UTF8&cdPage=&cdERR=noPurchase#CustomerDiscussionsPost


Worked for me with a small change

1. Remove disc from tray.
2. Switch off player and unplug from mains.
3. Wait 30 seconds, then reconnect mains.
4. Turn on player with remote. press the 'Repeat' on the remote for 10 sec'.
5. Press enter on remote. (There will be no on-screen response.)
6. Press 8, 4, 2, 6, 9 on the remote. (There will be no on-screen response.)
7. Press enter on the remote. Player will automatically shut off.
8. Turn player on.
9. Turn off.
10. Turn player on then off again.
11. Player is now region-free.

Dec 30, 2008 | Samsung HT-X715T Theater System

2 Answers

I have a Samsung HT-z510 home audio and the wireless receiver for the back speakers stays in standby mode. I have set the mode to cinema but it still stays in standby. What can I check next?


Here is how I reset. Key terms to identify: Main unit, remote unit, transmission card, reset button on remote unit. 1. Unplug both units and remove transmission card from rear of Main unit. 2. Wait five minutes. Insert transmission card in rear of Main. 3. Turn on both units. If units do not communicate, there will be a solid red indicator on remote unit...In this case continue with 4. Use remote and turn off main. 5. Point remote at main and enter the following four digits, holding each down for about a second:  0   1   3   5 6. The main unit should turn on. 7. With remote unit on, press and hold down the reset button for 5 seconds.

Nov 29, 2008 | Audio Players & Recorders

1 Answer

How can I make Samsung Home Theater HT-TWZ312 DVD Region Free


there is no region hack for.......
but please try the following code may be works>>

1. Remove disc from tray. 
2. Switch off player and unplug from mains. 
3. Wait 30 seconds, then reconnect mains. 
4. Turn on player with remote. Wait for player to finish loading and display 'no disc'. 
5. Press enter on remote. (There will be no on-screen response.) 
6. Press 8, 4, 2, 6, 9 on the remote. (There will be no on-screen response.) 
7. Press enter on the remote. Player will automatically shut off. 
8. Turn player on. 
9. Turn off. 
10. Turn player on then off again. 
11. Player is now region-free.

Thanks for using FixYa.

Sep 27, 2008 | Samsung HT-Q100 System

Not finding what you are looking for?
Sharp HT-DP3000 System Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

69767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a Sharp Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...