Question about Televison & Video

1 Answer

I HAVE A DAZZLE*TV MOBILE UNIT REV:1.2 AND SOFTWARE PCTV TV CENTRE ANALOG VER 4.0 THIS WORKED FINE WITH MY PREVIOUS LAPTOP WITH WINDOWS xp. I HAVE UPGRADED MY LAPTOP AND THE OPERATING SYSTEM IS VISTA.HOW DO I GET THIS TO WORK?????

Posted by on

  • adavey Apr 29, 2008

    Pinnacle was the manufacturer of this device, I have visited their website, they have a lot of downloads - I am not sure of the correct one, but will contact them with the same issue

    Thanks for your help

    tony d

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,635 Answers

Most of the XP and older drivers, and older software will not work with Vista. Contact the manufacture for your Dazzle TV to see if they have an update for your device that will work with Vista.

Start by visiting the site for Dazzle TV support to see if they have Vista downloads to update the drivers. If not then contact their tech support.

Jerry G.

Posted on Apr 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV works fine for 12-18 hrs. Then picture goes off


It seems that your unit has some sort of Thernmal problem or a problem that is shutting down the Power Supply section to the Video side of things.
You need to take the unit to a reputable service centre/man and ask for a firm "Quote" for the work to be done.

Jan 21, 2010 | Mitsubishi VS-6055 60" Rear Projection...

1 Answer

I need a diagram of how to set up the analog converter box or instructions.


Hi,
I am posting the instructions of how to set up the analog converter box :-
Hope it will you.
· Things you’ll need:
Analog TV, antenna, two coaxial cable, and converter box

· Instructions:
Step 1
Unplug coaxial cable on the back of TV "antenna in" (RF) port
Step 2
Insert coaxial wire into the "antenna in" on the converter box
Step 3
Use second coaxial wire and plug in the converter box, "out to TV" port. Plug the other end into
“antenna in" on the TV
Step 4
Power on the converter box and TV. Change TV channel to 3 or 4. Follow on screen instruction to
Complete setup.
Step 5
After setup you will begin to see more channels than before with better clarity. Some stations will broadcast two or three channels. Enjoy

Please let us know if that was helpful enough.
Good Luck & Thanks,
Shiv.

Aug 18, 2009 | Televison & Video

2 Answers

I want to find the Sky remote code for this Tv.


Just got an LG 42LH2000 and code 0206 works

May 16, 2009 | LG Televison & Video

1 Answer

My new tv digital converter box weill not pass analog tv signals. The tv works fine if I take the box out of the circuit. I am in a motorhome using the normal tv antenna on the roof.


you need to split ant. signal then get a manual selector switch hook 1 wire to convertor input then the output& the other ant wire to the selector switch then from selector to tv

Dec 20, 2008 | RCA Televison & Video

1 Answer

After an electrical storm last night we have lost ITV, Ch 4 etc on Digital, BBC and Sky on freeview are fine. All analogus signals are of very poor quality. Any ideas please?


Electrical Storm normally damage Tuner in TV.
Symptoms in tv like poor analog tv signal reception shows replace TV Tuner.
Regards,

Sep 03, 2008 | Televison & Video

2 Answers

Green Plaid then Vertical Lines, Failure of hard controls, Analog Board?


You are absolutely correct, When anyone complains of vertical lines or bars, the next step is to see if it happens on only digital inputs ( digital board ) , only analog inputs ( analog board ) , or both ( DMD board ) .

Analog board can be purchased at www.partstore.com ,

Jun 04, 2008 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

Hi guys, don't know if the previous post got through. Have a new LCD tv and DVDr, connected with a HDMI cable. when DVDr switched off analogue and digital picture is fine. as soon as dvd is switched on...


yes, hdmi will give you better results..
are you running hdmi to hdmi connection on tv from cable box?
if so, that is correct but as for the dvdr, what tv port are you connecting it to? i would use another hdmi cable for the dvd too for best picture resultif it's an option on your dvd.. you should have multiple input outlets on your lcd with 1-3 options for input devices via analog or hdmi.. so analog is not hdmi--hdmi is digital so it switches to the hdmi resolution when you turn it on..

let me know how it goes and if i was helpful involving resolution.. helpful feedback is appreciated.. thanks, d

your dvd player should be set to a different

Feb 27, 2008 | Televison & Video

1 Answer

No sound on analog inputs, digital sound is ok


1) IT02 Shorted, pins 92 and 93
Cause: Solder splash
2) IT05 pins 20 & 21 shorted.
Cause: Seems to have been cause by too much solder.
3) IT02 was found to be defective.
Cause: Defective component.
4) IS11 missing circuit trace.
Cause: Caused by some one that replaced/removed this IC previously.
5) IT02 solder, pins 42, 43 & 44
Cause: Two boards found with these same pins with cracked solder
6) IS13, pins 1 & 2 shorted
Cause: Seems to have been cause by too much solder.
7) Audio Quits when board is tapped.
Cause: Soldered all IC's on bottom of board. Also soldered IT04, I516, I517, I510, I501.
8) Also, please resolder IT05 and IT06
9) Check for cracked patterns under IT05

Dec 10, 2007 | Hitachi 53SWX12B 53" Rear Projection...

1 Answer

Component Video inputs do not work


I started back in the day of tubes. A family would have one set and it would be a 19" black and white. There are different resolutions now. The components probably do work, but, they don't pass the 480i signal. The satelite converter's analog signal needs to be set to 480p and the DVD needs to be set to progressive if it does have that setting. If the DVD is not a progressive scan DVD, then, the only inputs that it will show on is the analog signal. Some of the dish converters have a switch on the face for changing the resolution. If yours doesn't then put it in an analog source and go to the menu and change it there. Then move it to the component input. Hope this helps.

Jun 23, 2007 | Panasonic PT-53WX42 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6445 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...