Question about Arris DSR922

2 Answers

Motorola #DSR922 question

I cannot get the channel guide. My provider had me go to diagnostic G
and I went to the first line and it had a 1920 on it. She said my memory was full and I would have to erase everything and start over. How do I delete all
my memory and start anew?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Yes. Memory is full. You must have parked on that Canada Anik bird. You didn't even need to actually program it in; as long as you park there it's a good chance it'll download the Canadian stuff and that fills up your memory. You need to do a master reset. Options 6-7-7-8. Better do an internet search for a good procedure to follow. It'd take several paragraphs for me to write it down here. Just find a web site that details it for you.

Posted on May 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 78 Answers

Call your provider and ask to talk to an installer. most likely they'll be able to tell you on the phone. if not, get them to send someone out to fix your problem. it should be a free service call since you are paying rent on the unit anyway.

Posted on Apr 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will I be able to get programming service for a Motorola dsr922 receiver I recently buy from a friend


Yes, programming-center.net and Skyvision.com sell packages on W5. No ESPN or ESPN2 are available and the Discovery channels are only offered for 6 months.

Dec 01, 2010 | Arris DSR922

1 Answer

Lost all Satellites


I don't remember exactly but vert is 13 volts and hor is 18 volts or vice versa..its one of these ways

Aug 05, 2009 | Arris DSR922

2 Answers

DSR 922- to begin with it wouldn't shut off, no function will work with the remote, unplugged it and replugged it and now there is nothing but the inspirational channel on G3 217. H20


IF the receiver lost its sat settings you had, you best check the internal battery. the lithium battery should be 3.70 volts...if its dead you need to replace it, without interupting the power source...this will also cause you to lose your unit ID number. then you won't be able to subcribe to programming...the 922 can be repaired if the battery dies.

Jul 09, 2009 | Arris DSR922

1 Answer

MY DSR922 RECEIVER WILL NOT ALLOW ME TO HAVE THE CORRECT HORIZONT


we live in the midwest and our manual stated we should use linear west setting. well we changed that setting to linear east and the skews are now correct. we actually live in Illinois. thanks for your reply
have a nice day

Jun 22, 2009 | Arris DSR922

1 Answer

Cant get digital channal on my DCP 501


From page 24 of the Installation Section

The clear protective film on the DCP501 display must be removed and transferred to the inside back cover of your
DCP501 Home Theater System User Guide. The Unit Address and Serial Number found on the protective film is
required for activation of your DCP501 cable TV receiver by your cable TV service provider.


On Page 28 -

Do not disconnect the cable connection between the RF In and To RF In ports. Removal of this
cable could disrupt operation of the DCP501.

IMPORTANT! The digital cable feature of your Motorola DCP501 can be activated only in
certain cable systems throughout North America. Contact your local cable TV provider to
determine whether the digital cable feature of your Motorola DCP501 can be activated. In cable
systems where the digital cable feature cannot be activated, you may connect an external cable
receiver provided by your local cable provider. For best results, connect an external cable
receiver through the audio and video inputs on the back of your DCP501.

Page 74 -

Using DCP501 Cab le TV Functions
The DCP501 has an advanced CATV set-top terminal that allows you to view cable channels.
The DCP501 must be authorized for cable TV operation by your cable TV operator before it will
tune channels.
To use your DCP501 to view cable channels:
1 Press SOURCE to display C ATV on your TV. C A TV and the last channel tuned are displayed
on the DCP501 display.
2 Press MENU to display the TV program guide on your TV.
3 Press GUIDE to display the television program guide on your TV.
4 Change channels by pressing CHANNEL/PRESET���� or making your selection with the
program guide on your TV.
If you receive an electronic message from the cable operator, the message icon �� turns on.
You must use the TV program guide to retrieve an electronic message.
Additional DCP501 cable TV functions include CATV Record and CATV Channel Scan.

If you don't have the manual go to:
http://www.retrevo.com/support/Motorola-DCP501-Receivers-manual/id/393bh936/t/2/ and register to get it. It's free.

Mar 21, 2009 | Motorola DCP-501 Receiver

1 Answer

I need an owners manual for the receiver


What channels on what satellite? You should always start with sat G1 channel 3 and rehit. This will map in all the channels the receiver is authorized to get from Motorola.Options 6 5 and the trip counter should go up by 5 and show ~ 4600 channels
After that you need to make sure you are good on the arc. Start with G-1 5 (analog) then go east about 20 counts to C3 channel 7 On both G1-5 and C3-7 you may need to adjust the skew to get the picture.
The same is true for digital channels like those on G3C like TNT, CNN, SPIKE etc.
Once you know you are on the satellite then adjust the skew.

Feb 22, 2009 | Arris DSR922

1 Answer

How do I decipher the SN on a Motorola DSR922 receiver.


The DSR922 was made from 2001-2007. No more being made from motorola ;-(
The seventh digit from the left is the date code.
So a 4 in that place means manufacture date of 2004.

Jan 29, 2009 | Arris DSR922

1 Answer

Can't tune any channels above # 5 on sat. GB


Did you try to clear memory and reprogram receiver. should solve the problem.

Nov 16, 2008 | Arris DSR922

1 Answer

Help -Motorola DSR922 Clicking After Power Goes On And Off


I had same problem - found clicking stopped when I disconnected the Ku LNB - probably shorted. But, I have other problems in that both receiver and unit i.d. numbers have changed. So far, the only option seems to be to send it back to ATS (828 465 9968) for repair. I also had unit on UPS power.

Aug 03, 2008 | Arris DSR922

1 Answer

Tiling and Breakup


I am having the same issue. The receiver, however, is a 920 model. The satellite repairman states that the receiver is the problem and that I need to purchase a new 922 model.

-Greg
Michigan

Mar 24, 2007 | Arris DSR922

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arris Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you an Arris Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...