Question about Printers & Copiers

1 Answer

Ram error on a 6250 xerox printer - Printers & Copiers

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

TRY FIRST (Solutions without parts):
For a continuous RAM Error message, try cleaning RAM contacts and reseating RAM.
NOTE: Third-party or generic RAM is not covered by warranty or service contract and should be removed for troubleshooting purposes.


TROUBLESHOOTING TIPS AND HINTS:
Replace RAM. If problem is not resolved, replace the Image Processor board. Please Note:
Intermittent 6250 RAM Errors can be resolved by replacing the Print Engine Board and EEPROM, remembering to Save/ Restore in Diagnostics.

Posted on Apr 28, 2008

  • Rick Kasper Apr 29, 2008

    Well thats the Xerox documentation.

    If that's not good enough don't know where your going to find your answer

×

3 Suggested Answers

  • 2072 Answers

SOURCE: Phaser 6250 "Ram error" (?)

TRY FIRST (Solutions without parts):
For a continuous RAM Error message, try cleaning RAM contacts and reseating RAM.
NOTE: Third-party or generic RAM is not covered by warranty or service contract and should be removed for troubleshooting purposes.


TROUBLESHOOTING TIPS AND HINTS:
Replace RAM. If problem is not resolved, replace the Image Processor board. Please Note:
Intermittent 6250 RAM Errors can be resolved by replacing the Print Engine Board and EEPROM, remembering to Save/ Restore in Diagnostics.

Posted on Apr 15, 2008

  • 1 Answer

SOURCE: Xerox 6250 - Jam at Registration Roller

Ik heb een deregelijk probleem gehad, ook bij merdere printers tegelijk. De oorzaak was achteraf logisch. We hadden een nieuwe zending briefpapier waar een bepaalde film op zat waar de printer niet tegen kan. Logisch, want het kan niet zijn dat alle 3 printeres tegelijk hetzelfde mankeren.
Ander papier erin. De eerste hoeveelheid zal nog problemen geveb tot der olletjes vrij zijn van de vettigheid.
groeten,

G.Eijken te Hoorn

Posted on Nov 15, 2008

  • 2072 Answers

SOURCE: im getting an error not a genuine xerox product on

You may have gotten a cartridge meant for another region. Like Canada or Europe, I have seen it happen. Call them and ask for a replacement.

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find the page count for the printer


Phaser 6250 Support - Xerox Support and Drivers

www.support.xerox.com/support/phaser-6250/support/enus.html
XeroxProduct support for Phaser 6250. ... with our support knowledge base directly, and troubleshoot itself. Automated Remote Diagnostic Tool - PhaserSMART™ ...

Oct 02, 2015 | Xerox Phaser 6250DP Laser Printer

1 Answer

How do you use photo paper in a xerox phaser 6250?


If you want to use photo paper for your Xerox phaser make sure the photo paper is meant to be used in your printer. The best paper would be the Xerox brand photo paper which is made to be used in the Xerox phaser printers. You use them like normal paper and print your document or image onto the paper. If you cannot find the paper that works with this xerox printer go to the Xerox website and under supplies, then entering your printer model it will give a list to the paper recommended for this model.

May 27, 2010 | Xerox Phaser 6250 Laser Printer

1 Answer

How do you reset transfer roller count on phaser 6250


I have a XEROX 6200 Printer. I tried to do the solutions above, but I did not have those options in the Maintenance Menu. I pulled out the Transfer Roller Unit and opened up the two screws on top. When I pulled the top, it was loaded with toner. I poured out all that toner in the trash and blew out the rest with a air gun till it was clean. Be careful of the two white gears on the side, when you take off the top. You don't want to lose them. Anyhow, I reassembled the unit back and stuck it back into the printer and the error message was gone. Yeayyyyyyyyy!

May 14, 2010 | Xerox Phaser 6250 Laser Printer

1 Answer

Im getting an error not a genuine xerox product on my xerox phaser 6250


You may have gotten a cartridge meant for another region. Like Canada or Europe, I have seen it happen. Call them and ask for a replacement.

Mar 03, 2010 | Xerox Phaser 8400 Laser Printer

1 Answer

Xerox 6250 will not warm up. it says


Yes it can be the used fuser. Kind of odd for it to be anything else but the fuser.

Jan 25, 2010 | Xerox Phaser 6250 Laser Printer

1 Answer

Xerox phaser 6265 displays engine service 8300


From the service manual:

Code 83: Engine NVRAM is corrupted or receiving wrong data from a CRUM.

1 Cycle power to the printer. Does the error still appear? If so, go to step 2.

2 Remove and reinstall the Imaging Unit and Fuser Assembly. Does the error recur
after the power has been turned off and then on? If so, go to step 3.

3 Replace the imaging unit. Does the error still occur? If so, go to step 4.

4 Replace the fuser assembly. Does the error still occur? If so, to to step 5

5 Replace the EEPROM board. Does the error still occur? If so, replace the Engine Control Board.

Jun 23, 2009 | Xerox Phaser 6250 Laser Printer

1 Answer

6250 Jam


Go to the Xerox website and select the drivers tab. Select the 6250 and search for the firmware for > Firmware Updatethen follow instructions

Dec 04, 2008 | Xerox Phaser 8500/DN Printer

1 Answer

Phaser 6250 "Ram error" (?)


TRY FIRST (Solutions without parts):
For a continuous RAM Error message, try cleaning RAM contacts and reseating RAM.
NOTE: Third-party or generic RAM is not covered by warranty or service contract and should be removed for troubleshooting purposes.


TROUBLESHOOTING TIPS AND HINTS:
Replace RAM. If problem is not resolved, replace the Image Processor board. Please Note:
Intermittent 6250 RAM Errors can be resolved by replacing the Print Engine Board and EEPROM, remembering to Save/ Restore in Diagnostics.

Apr 15, 2008 | Xerox Phaser 6250DP Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96738 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...