Bluetooth Pairing with Motorola Razr

I successfully paired my bluetooth by going into the connection phase, just using my common sense on what to do next once I turned the bluetooth on. Since it was not paired to anything, it automatically went into pairing mode. Thanks anyway!

the headset might be broken (the speaker)
try to connect to another mobile phone and check if it works, then report back

try to check the setting of your blutoot, check te find me option.

ook .. man try to do this. but first back up u'r fone,. here it is! go to menu, settings, initial set up, master clear code ( 000000 ) fone boots just w8,, then go again to menu, settings, initial set up, master reset code ( 000000 ) fone boots and now do your things,.. let me know..

Delete it from your Razr, turn off the bluetooth and recharge it to full. Try pairing it again. Make sure you enter the passkey correctly. Check the manual for the bluetooth if you dont know what it is. It is usually 0000.

First when ya call connects, hit the Menu key (three lines inthe center) choose USE HANDSET.
Second Make sure the Bluetooth is fully charged, andit seems to lose charge fast.

don't think so.
maybe while pairing up the new phone you have turned down the volume on the earpiece?

The V3C cant pair with other phones.. I have to hold my bluetooth head set on top of my phone to get it to pair sometimes and make sure the headset is in pairing mode

It might already have been figured out but if you hold the answer button on the headset down until the light stays on steady, it is in pairing mode. You can then go to bluetooth setup on the Curve and it will find the headset.

Have you pressed and held the button on headset until light is always on, as this is in pairing mode, then search devices with your phone.