Question about Motorola Mobility RAZR V3
I had a Razr v3c that worked with no problem, but when I 'upgraded' to the v3m the alarm clock fails to go off loudly when the phone is set to 'alarm only' function, thus rendering the feature useless. I unfortunately discovered this out the hard way by missing a couple of appointments I was counting on my alarm to wake me up for. This doesn't seem to be a problem isolated to my particular phone but the v3m in general. My carrier is Verizon.
Is your audio or mp3's sounds normal? if not you have to bring it to the center and clean the connections or replace u'r buzzer., and if u'r audio's working fine and only the alarms are not, try to do this, go to menu, settings, initial set up,master clear ,code ( 000000 ) then w8 and fones boot, then go again to menu, settings, initial set up, master clear code ( 000000 ) fone boots.,, and now try to do u'r thing's ,.. let me know
Posted on Apr 28, 2008
Tips for a great answer:
Jun 06, 2010 | Motorola Mobility RAZR V3m Cellular Phone
Jun 03, 2008 | Motorola Mobility RAZR V3m Cellular Phone
You have a loose connection inside the phone. See solution
that I posted for others. Basically, open phone then press with
your fingers the area between camera lens and vol up/down buttons. In other words you are squeezing the pieces together
to get the ribbon cable inside the phone to reseat. Let me
know if this works for you please.
Aug 01, 2007 | Motorola Mobility RAZR V3c Cellular Phone
234 people viewed this question
Usually answered in minutes!