I need installation software

Hi,

You should find compatible Vista drivers from the 2wire website by following this link http://support.2wire.com/index.php?page=download

Just remember to install the 2wire software before plugging the device in.

Hope this will help

Thanks

You can adjust settings by going into 2Wire Router using your internet browser..
Default IP Address on 2Wire Routers: http://home/ This will take you to manager tools
Default Username / UserID on 2Wire Routers: None
Default Password on 2Wire Routers: Wireless
Default Netmask on 2Wire Routers: 255.255.255.0

If you can’t access management tools because of logon or password, you can reset to above
By following these directions

http://support.2wire.com/index.php?page=download click on the adapter link for the driver and instructions. If you dont see the picture of your adapter, then click on the legacy link on the adapter page. After you install the software just use the icon on the lower right to connect to your wireless network.

I will give you a easiest way for finding the drivers that you need foryour hardware.Just download the software named driver magician.Installit and it will search for the drivers that is not installed for thehardware you have through internet and will download it for you.

here is the link for that software

http://www.ziddu.com/download/4569239/Driver_Magician_3.42.zip.html

I will give you a easiest way for finding the drivers that you need foryour hardware.Just download the software named driver magician.Installit and it will search for the drivers that is not installed for thehardware you have through internet and will download it for you.

here is the link for that software

http://www.ziddu.com/download/4569239/Driver_Magician_3.42.zip.html

from amazon's product description...

maintain

hope this helps :)

I need free download software for my Aiptek Mini PenCam digital camera,because I lost the cd that I purchased in year 204

I UPGRADED TO VISTA AND NOW I CANT GET MY 2WIRE PORTAL SOFTWARE TO INSTALL. IS THERE AN UPGRADE OR NEW SOFTWARE AVAILABLE ? ► there is no need to install the CD if ur trying to connect using an ethernet cable to the 2wire. If ur attempting a wireless connexn, u shud configure the wireless set up.

1000 SW (Model) for 2wire,Connects fine, intermittently the Broadband Link goes ORANGE and keeps me off Internet ► this is a possible line problem. Try plugging ur 2wire's phone cable directly to the phone/wall jack removing the filter or splitter in the process. Then see if the problem reoccurs. If it DOES NOT, replace ur filter with a new one. If it DOES reoccur or if it is already connected to the phone/wall jack directly, contact ur Internet service provider.

keep me posted on these...

Dear Zeike,
you can download the driver from this site:
http://www.drivers-software-download.org/tag/2wire-usb-remote-ndis-ethernet-driver

And for installation instructions ,please download this file:
www.2wire.com/pages/pdfs/5100.000228.000.Rev.B.pdf

Be Happy Always
Regards

I have installed 2 2wire adapters with no problem. When using config software utility, don't select gateway (if using only adapter), then continue until sets up. No serial # required unless using a gateway, which is not needed to connect to wireless.