Question about PC Desktops

2 Answers

I need to format an acer x223w monitor - PC Desktops

Posted by on

2 Answers

One Tirkalas to another who are you I'm pretty sure I can help yo

Posted on Apr 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers

Format a monitor? Or do you mean install the drivers for the monitor?

Posted on Apr 29, 2008

1 Suggested Answer

  • 341 Answers

SOURCE: I just bought an X223W

You probably need to up the screen resolution.
Start/Control Panel/Display/Settings tab/Screen resolution.
1024X768 minimum.
While you are in the click the advanced button then click the monitor tab. Your refresh rate will most likely by 60 Hertz. Down below that you will see a "Hide modes that this monitor cannot display" check box. Check it. Now click the drop down arrow for the screen refresh rate. Set this to the highest setting there. This will stop the flicker that gives a lot of people headaches when they spend a long time at their computer.

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Acer m1201 desktop computer will not come on.After turning on , then switch monitor off and on , It says ACER, then "no signal" .How can I fix it?


Acer monitors all display the ACER logo when you turn them on. There are one of three most likely issues with the system.

  1. If the monitor has multiple input jacks (VGA/DVI), check to be sure that the monitor is selecting the input that you have the computer connected to. One of the control buttons on the monitor should select input source.
  2. If #1 is not the problem, the monitor itself may be faulty. The input jack may not be working. Test the system with another monitor if possible.
  3. If another monitor doesn't work either, then you have a problem with the on-board graphics adapter for the computer. You will either need to replace the computer, or if possible, install a graphics card into the machine to take over for the failed portion of the motherboard.

Dec 08, 2015 | Acer PC Desktops

1 Answer

Sudden VGA cord format not supported


Try downloading Either CCCP of KLcodec packs. That is what the "format not supported" means. To stop the film playing and continue using your computer you will need to start the "Task Manager" [ctrl, Alt and Del] , then end the media player that you are using.

Jan 12, 2013 | Acer Aspire M1640 Refurbished Intel...

1 Answer

First i have windows xp and i wanted to format it, but it didnot booting from cd drive. So i decided to set up new xp through harddisc. Because i already have a copy of xp in my harddrive and i clicked the...


insert your os cd and boot it from cd rom by pressing either f5,del or f12 depending on your machine.if it does not boot,try replacing the cd rom.good luck

Mar 16, 2012 | Acer PC Desktops

1 Answer

Is hp tower compatible with acer keyboard and monitor


yes u can hook any keyboard, mouse, or monitor to any computer

Jan 28, 2012 | Acer AL PC Desktops

1 Answer

Can i upgrade my old monitor to a new acer 19" Acer Monitor


Hi Ricky,
In most situations you won't need any special connections, as most LCD screens have the same VGA interface sockets and cables as your older screen.
Let me know if I can be of any further assistance.
Best wishes,
Graemevm

Jan 24, 2012 | Acer Aspire T120 PC Desktop

1 Answer

I have just installed a Acer LCD #X223W moniter. What do I need to do to get my speakers to work with it? Is there a missing port or do I need a new cable. This moniter has a HDVi cable but the Computer...


Did you give the correct model of the Acer monitor you have?

When I looked up the X223W monitor, I see a monitor with a DVI-D port and VGA port. Only the VGA cable is usually included in the box. If your computer has a VGA port (most older computers that came with only the video chip on the motherboard), you can either use the VGA cable or get a VGA to DVI adapter and use a DVI-D cable (purchase separately). Alternatively, check the specs of your power supply and available card slots and buy a new video card with a DVI port. If you have only a DVI port on your computer, get the DVI cable (the VGA to DVI adapter would work but isn't a good option).

If I read the specs correctly, this monitor doesn't have speakers. You should plug your speakers into the audio out of your computer. If you use the on-board audio you will see at least two jacks (microphone/line in) and audio out (speakers). Many audio cards and some motherboards come with additional jacks for surround sound so check your system information. Audio extension cables are a cheap solution if the speaker cables are too short to reach to your computer.

I hope this helps.

Cindy Wells

Aug 05, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

A display problem in my Acer desktop pc


techguru 2009: First thing disconnect all power. Remove all drives (hard drive, CD/DVD, Floppy). Then remove all PCI cards. Also slowly remove the Memory cards. You should only have the motherboard w/processor and the power supply connected, do not connect the monitor or mouse\keyboard. If you have a CMOS battery also remove it. Careful turn the power on, you should hear several beeps. That is letting you know that there is no memory installed. Turn power off disconnect power cord. Slowly install the memory cards, keyboard, mouse, monitor. If you have a pci video card install it now. Turn power on. you should see the bios loading then error message there is no disk or operating syste. turn power off and start connecting one device at a time so your bios can recognize it. This should let you know if you have faulty hardwareby isolating each install. If you still have problems let me know.

Jan 30, 2009 | AcerPower FV PC Desktop

1 Answer

No sound driver for acer x223w cant find it


You need to find the make of the motherboard and the board number before you will be able to download the correct driver.

Dec 01, 2008 | Acer PC Desktops

1 Answer

I just bought an X223W Acer LCD monitor. The texts appear blurred on the screen. What adjustment do I need to make it sharp? Thanks.


You probably need to up the screen resolution.
Start/Control Panel/Display/Settings tab/Screen resolution.
1024X768 minimum.
While you are in the click the advanced button then click the monitor tab. Your refresh rate will most likely by 60 Hertz. Down below that you will see a "Hide modes that this monitor cannot display" check box. Check it. Now click the drop down arrow for the screen refresh rate. Set this to the highest setting there. This will stop the flicker that gives a lot of people headaches when they spend a long time at their computer.

Nov 29, 2008 | Acer PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...