Question about Projection Televisions

2 Answers

Samsung SP43J5HF Rear Projection Tv

Hi, I have a Samsung RPTV model SP43J5HF and am inneed of a convergence board model # AA9500055L. Just wondering ifanyone knows where I can get one? Maybe there is an upgrade/replacementboard? (I'm positive there is a few different model boards that can besubstituted). I have found similar model boards...

http://tigerdirect.partsearch.com/content/pages/tv-convergence-boards.htm
http://www.vancebaldwin.com/products/?SMGAA95-00055K
http://www.vancebaldwin.com/products/?SMG&start=1801

I'm sure something there could be substituted but i just don't know.
Is there a difference between the convergence board and convergence amp board? The board I need strictly speaking is a conv-amp board.

Any help greatly appreciated.

Posted by on

  • 1 more comment 
  • Damian LAng Apr 29, 2008

    More information can be found in my thread on another websites forums:
    http://www.diyaudio.com/forums/showthrea...

  • Damian LAng Apr 30, 2008

    Sorry but maybe I don't understand. I do have that manual and all it tells me is what i already know "AA95-00055L ASSY-PCB,CONV AMP;-,SP53J5HF,J51A,-,-,". And unfortunately I'm in Australia and cant call "Vance Baldwin".

  • Damian LAng Apr 30, 2008

    Woah 3 replies as i was typing disregard my last message. Thank you all, gotta love this place. CLOSED

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 19,396 Answers

The number for the board does not return anything. Either check part list on service manual or phone Vance Baldwin, they will tell you which spare to buy. Vance's number is on top bar on their website

Posted on Apr 30, 2008

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 563 Answers

Hi Daml

You can find this part from Samsung UK , click HERE to check it out and also to order it. Delivery is within 7 days.

Could unfortunately not find anything for Australia.

Let me know if you need any further assistance.

Thanks for using Fixya !

Posted on Apr 30, 2008

  • 1 more comment 
  • Marnus Jacobs
    Marnus Jacobs Apr 30, 2008

    Daml



    You could also find the part HERE . You'll notice that Part No : AA9500055L is also for TV Model No : SP53J5HF.



    Thanks for using Fixya mate !

  • Marnus Jacobs
    Marnus Jacobs Apr 30, 2008

    Daml



    I found a Australian based spares Company , but the part number is SSAA9501799N from the following site - click HERE.

  • Marnus Jacobs
    Marnus Jacobs Apr 30, 2008

    Hi Daml



    Only a pleasure to be of assistance , give us a shout should you need any help in future.



    Thanks once again for using Fixya !

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a big screen samsung it plays red and green and the imaged are doubled looks like 3d any ideas


Hi,
Your question shows its Samsung rear projection TV that has 3 tubes to project picture.
Symptom shows TV got problem in convergence board that will be replaced.
Model number or TV would help me to provide you more info.
Thanks.

Jan 15, 2010 | Sony KP-57WV700 57" Rear Projection HDTV

1 Answer

Convergence is off and wont adjust with remote control adjustment


Convergence control will disappear / inactive in TV menu when Convergence out section got failure.
Please replace convergence out board in TV to solve this problem.
Is it Samsung HC-N473W model?
Thanks.

Nov 02, 2009 | Samsung HCN473W 47" Rear Projection...

1 Answer

Rear projection tv screen warped


HI, this is typical convergence chip failure. you will need to replace the convergence board in this set asap. this will fix this issue you are experiencing.

May 23, 2009 | Samsung Projection Televisions

1 Answer

Rear projection tv screen warped


Hi, this TV is repairable and you will have to replace two devices. the first is the Convergence board. this device regulates the convergence of the RGB stream so it can be projected evenly. it works in conjunction with the CRT's and deflection assembly and the Focus pack(module). The second device that will need to be replaced is the Focus pack(module). This module is malfunctioning and is causing the smudges and warped look at this time.

Replace these two devices and it will fix this set. i will post the Part numbers below along with there respective prices as well.

Focus Pack(module).--- Part Number-- BP59-00005A--- $38.95


Convergence Board assembly--Part Number---BP94-00383A---- $165.95

Please rate and god bless:)

May 07, 2009 | Samsung HCM4215W 42" Rear Projection...

1 Answer

Can't figure out the model of my Samsung Rear Projection TV


Most of these issues can be solved by resoldering the convergence ICs. Resolder the convergence ICs first and if it still doesn't work then look for a board. I bet you fix it...

Jan 12, 2009 | Samsung PCN5425R 54" Rear Projection...

1 Answer

Samsung HCN436w 43in rptv


try disconnecting the convergence board and see if it will turn on without this board connected - if it turns on then you likely needs to fix or replace the convergence board

Jun 19, 2008 | Samsung HCN436W 43" Rear Projection...

2 Answers

PCL542r convergence


Samsung part number AA95-00706C its available at www.partsstore.com

Mar 13, 2008 | Samsung PCL545R 54" Rear Projection...

1 Answer

Samsung 52" tantus pch521r convergence panel


I found a this SITE that carries that convergence assembly for your TV.
Good Luck.

Mar 10, 2008 | Samsung PCH521R 52" Rear Projection...

1 Answer

Samsung HCL5515W red convergence problem


sounds like your convergence IC's have fail and possibly a bad dcm. Some of there models have a small board with the ic's them. It may be cheaper to replace the board. But you can repair it if you have proper equipment

Jan 20, 2008 | Samsung PCN5425R 54" Rear Projection...

2 Answers

Tv is dead


Hi, Yes! the convergance board can stop the unit from coming On. No need to change the board, just change the ICs. This is what it looks like,you will have to remove the board from the unit take note of the wires before removing them, -794a500.jpg

Nov 14, 2007 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...