My expresso wanted a fix.

Hi,

Please make sure that your filter is cleaned out properly. Also, you can switch power outlets before attempting to make your espresso again.

Thank you.

Expresso is not coffee. Espresso is. So I assume you don't have a real coffee machine...

Check the thermostat or element on the top of the machine.

Check the nozzle at the end of the steam wand, use a paperclip to clear, if you can get hot coffee then the steam wand is just blocked.

you can call this number they will help you with your problem
1-866-526-6204

Here is a link to the replacement parts page for your machine at West Bend's site. At the bottom of the page is a link to download the manual.

It sounds like your flow meter is not working properly. Most likely it goes for about 5 seconds, stops and starts blinking with all the icons on. You can replace the flow meter and get it working again.

Ran into the same problem on mine just after using the steam, so it definetely wasn't clogged... hope this helps.

Just try running the expresso maker through a full cycle and then try the steam again. Not sure if the machine air locked or something, but the expresso cycle appeared to get the water flowing again and then it had no trouble producing steam.

Hope it works.

Hi,

What kind of machine do you have?