Question about Philips 32PT5441/37 32" TV

1 Answer

Same problem here how much did it cost ya - Philips 32PT5441/37 32" TV

Posted by on

1 Answer

Same problem here, never buy philips anything again, i have encountered so many problems with this tv and its only 3 years old

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IT TURN ON BUT WHEN IT GET HOT IT TURN OFF


If its old,id toss it in the dumpster.Costs to repair are usually more than a replacement nowadays.thas just my opnion.hope it helps ya.

Jun 18, 2014 | Panasonic Standard (CRT) Televisions

1 Answer

Two days ago, my DVD player displayed lines through the TV. I changed out DVD players and the second one did it as well. Found out it could be the "Board" and costs$500 for a teck to come and replace....


It sounds to me as if it was NOT the DVD's but ya TV was on the way "Out" so to speak, and now it has failed completely, and yes unfortunately this is par-for-the-course. Of course ya couldfind out which exact board it is and try replacement ya self?

Jan 23, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

My CT-32SL14 32" TV has a high pitched Random BEEEEEEEEPing sound


prob high volt transformer tech may be able to repair replace cost high. 200 orso

Dec 01, 2008 | Panasonic CT-32SL14 32" TV

1 Answer

Tv will not work


hi there, sounds like a tweating bird noise when switch on means a defective FBT, horizontal section prob., it will cost you too much for the parts, better to think about it for the cost of new one.

Feb 01, 2008 | Standard (CRT) Televisions

1 Answer

Blinking issues


hi there, it may be the picture tube prob., in that case just trash it and don;t spent a dime for the cost of matterials are too much. ty

Jan 25, 2008 | Standard (CRT) Televisions

1 Answer

Turns off/ on by itself model 27v412t


well my tv was doing the same thing my prob was the buton bord.the ezyest way to check it was to take the back off and find the wires that come from the boton bord the plug the tv in and turn the tv on wile its on unplug the boton bord wires if the tv stays on that is probly your prob the bord dont cost much I found a site on here that has them for under $5.remember to be carefull when checking it out tv car be very dangerus.I found that if I beat on my buton bord alittel it would work for awile hope this helps

Oct 26, 2007 | RCA 27V520T 27" TV

4 Answers

Rca 32v434t


went in the menu and blocked the panel buttons on accident

Oct 13, 2007 | RCA 32V550T 32" TV

1 Answer

Mitsubishi 55" RPTV - Pictures goes out, sound stays on after on for some time


Sounds very typical of a component failing after heating up for a bit. Often in the Power Supply or Horizontal Output section, WE find the offending component(s) usually by using a can "Freeze Spray" and spraying suspected compnents when the problem stops thats ya faulty one... replace it/them and usually thats it. But if ya no good at doing it yourself.. then it's off to the shop... Generally because of ther size these beasts cost a bit to fix.. If ya have to take this route, ensure ya get a firm "Quote" AND an explanation of whats what. G L. Oh and offer to take it to the Shop, this will.should save ya some $$'s

Aug 08, 2007 | Mitsubishi VS-60607 TV

1 Answer

Tv does nothing


ahhh the noise maker comes to life again .. Ok my friend this is a common problem with this set If your lucky?? If you know anything about trouble shooting tvs then this is what ya got.. Try first to measure the Horizontal output transistor. It will meaqsure a few ohms between the base and emmitter. But the base and collector should measure about 450 to 550 olms on the diode settings onm the metter.if it measures shorted you need to replace the flyback tranformer along with the Horz output transistor. Now if the HOT( thats horiz output transistor)is not shorted then theres a little coil in the horizontal drive thats causing problems as you need to take out the coil from the PCB and scrape off the ends and reinstalkl it. also the horizontal driver tranformer as well as the resistor that feeds the transformer could be bad and thast is a 3200 ohm at three watts. if ya dont have a clue what I just said the sets gonna cost ya ariynd 200 to 300 to fix .. Is it worth it to ya>?????lol Good luck

Apr 01, 2006 | RCA F36685 36" TV

Not finding what you are looking for?
Philips 32PT5441/37 32" TV Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

667 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Jim Evans

Level 2 Expert

186 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...