Question about Intel D845EPI (INTELKD845EPILPAK10) Motherboard
Hi stan_z4, do you have the manual for you're board?
I'm showing the P4VMM2 is made by ESC = EliteGroup.
Which is not listed above (Intel D845EPI).
If you do have the board EliteGroup P4VMM2 than turn to page 11 in the user manual. The jumper for the cmos/bios JBAT1, Pins must be set to 1 & 2. If JBAT1 is set to pins 2 & 3 you will reset you're bios every time you boot up.
Don't have you're manual? Click on the link.
Posted on May 01, 2008
Tips for a great answer:
Jul 13, 2012 | Motherboards
Most laptops require you to take the laptop apart to get to
the CMOS Battery. It will be a silver battery about the size of a nickel
on the motherboard. The most common size is CR2032. Also sometimes
the battery will be in a vinyl covering and have a cable that attaches to a
port on the motherboard. Which ever type you have you'll need to either remove
the battery or unplug the cable.
May 12, 2012 | Motherboards
Oct 16, 2011 | Motherboards
Oct 08, 2011 | Motherboards
Jul 12, 2011 | ASUS Intel 845 Chipset P4B (P4B WOA)...
May 04, 2011 | Compaq (203966-001) Motherboard
Feb 21, 2011 | ASUS P5P43TD Core 2 Quad/ Intel P43/ DDR3/...
Feb 03, 2011 | Asrock K7S8X-R3 Motherboard
Dec 07, 2010 | Matsonic MS9158E+ Motherboard
Feb 05, 2010 | PC Chips M756LMRT+ PII/III/Celeron...
190 people viewed this question
Usually answered in minutes!