Upon powering on, I will occasionally (not always) get a reverse/black screen on the right half of the screen. If I power off, and on again, the full screen appears. The unit has a new, fully charged battery, and otherwise works fine. Is this a sign if imminent complete failure, or perhaps a loose wire somewhere??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you see the first screen (the orange one) hold the UP button as the bar moves across the bottom of the screen. Let go right before the screen goes to the silver logo. If it continues and opens Prefs, then you need to delete the program causing it to reboot.
If that doesn't work, do a Hard Reset. A Hard Reset will erase everything on your T5, so only do it if you have to. Hold the Power Button while you push the reset button. Continue with the instructions to finish erasing your device.
Try this, uninstall your current version of Palm Desktop, then go to this link on the Palm support website http://kb.palm.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html this will give you the link to the download for the TX version of Palm Desktop, this may or may not fix your particular problem but it is worth a try.
you will have to do a soft reset. Google on the web how to soft reset the palm tungsten e. It is just slightly complicated. If that does not work you may have to do a hard reset which you can also find out how to do on google but i dont think you will need to
Do you mean to remove it from the E or from the server?
I am going to assume that you mean from the Tungsten E. You need to hard reset the Tungsten E. Press the power button and at the same time do a pin reset using the recessed button on the reverse side of the E. Dont let go of the power button until you see the round Palm logo. Then let go if it and you will see a screen asking if you want to erase all data.