Question about Computers & Internet

1 Answer

USB FLASH DRIVE

Ive got a 4gb usb and when i plug it in, it doesnt work, it says please insert disk into drive E:

Posted by on

  • 2 more comments 
  • funsashi Apr 29, 2008



    My is same problem is happen but 8Gb samsung drive

  • funsashi May 11, 2010

    And also it didnt have warrenty.Brand is samsung.so i am in big trouble.partition also canot be create.

  • funsashi May 11, 2010

    I tried in sevaral ways it coudnt format.when I tried with format pic3 was appear.but drive ditect all the time

  • joei zul
    joei zul May 11, 2010

    have you tried formatting it?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Try Formatting the flash-drive, Quick format will do (fat 32)
if it still not detecting, might as well send it back to store where u bought it, They will replace it if it's still under warranty.

Posted on Apr 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My sandisk memory card of 4gb shows 0 bytes how do i format


Sometimes when a flashmemory stick or USB external hard drive fails because it was not removed fromthe USB port properly. If the device is removed byjust pulling it out of the USB port, it can cause the flash device to fail, youmust click on the Safely Remove Hardware icon on the Task Bar and select thedevice you wish to remove and only do so when instructed to do so When the flash memoryUSB hard drive device appears to malfunction it maybe possible to restoreit by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - AdministrativeTools - Computer Management - Disk Management. Then right click on Disk 1removable drive and click Format. After the flash drive has been formatted itwill indicate that it is Healthy.

Apr 25, 2011 | SanDisk 4GB microSDHC Memory Card

2 Answers

Unreadable pendrive


Are you sure the pen drive is using Drive G? Unplug it and then look at "My Computer" to verify what drives are being used at the moment. Plug it back in and see what has been added to the list in "My Computer"

Sep 14, 2009 | Toshiba 1GB USB 2.0 High-Speed Flash Drive...

1 Answer

Usb stick not usable


Because its beyond 4Gb that's why its already detected as a disk drive.

You can still save your files here. Have you already tried?

If so, what is the exact error you are getting?

Aug 06, 2009 | Toshiba 1GB USB 2.0 High-Speed Flash Drive...

1 Answer

My 4GB genx usb flash lights but cannot be recognised


my 4gb usb turn on lights but in my pc it dont appear .its appear for a second .and again turn off .please help me

Mar 03, 2009 | Identity port Scientific FBi3412-CL 512MB...

1 Answer

Massstorage


This will walk through the steps to create a bootable USB flash drive for the purpose of installing a Vista or Windows 7 OS. These instructions assume that you have a computer with Windows Vista installed on it.
Required:
· USB Flash Drive (4GB+)
· Microsoft OS Disk (Vista / Windows 7)
· A computer running Vista / Windows 7
Step 1: Format the Drive
The steps here are to use the command line to format the disk properly using the diskpart utility. [Be warned: this will erase everything on your drive. Be careful.]
Plug in your USB Flash Drive
Open a command prompt as administrator (Right click on Start > All Programs > Accessories > Command Prompt and select “Run as administrator”
Find the drive number of your USB Drive by typing the following into the Command Prompt window:
diskpart
list disk
The number of your USB drive will listed. You’ll need this for the next step. I’ll assume that the USB flash drive is disk 1.

Format the drive by typing the next instructions into the same window. Replace the number “1” with the number of your disk below.
select disk 1
clean
create partition primary
select partition 1
active
format fs=NTFS
assign
exit
When that is done you’ll have a formatted USB flash drive ready to be made bootable.

Step 2: Make the Drive Bootable
Next we’ll use the bootsect utility that comes on the Vista or Windows 7 disk to make the flash drive bootable. In the same command window that you were using in Step 1:
Insert your Windows Vista / 7 DVD into your drive.
Change directory to the DVD’s boot directory where bootsect lives:
d:
cd d:\boot

Use bootsect to set the USB as a bootable NTFS drive prepared for a Vista/7 image. I’m assuming that your USB flash drive has been labeled disk G:\ by the computer:
bootsect /nt60 g:

You can now close the command prompt window, we’re done here.
Step 3: Copy the installation DVD to the USB drive
The easiest way is to use Windows explorer to copy all of the files on your DVD on to the formatted flash drive. After you’ve copied all of the files the disk you are ready to go.
Step 4: Set your BIOS to boot from USB
This is where you’re on your own since every computer is different. Most BIOS’s allow you to hit a key at boot and select a boot option.
I used these instructions to get my new Dell Mini 9 laptop loaded with Windows 7 (the PDC bits). HTH.

Jan 23, 2009 | Computers & Internet

1 Answer

Urgent Product Need to Buy


You should right more information :?, eg price plan, country, currency... If you live in UK, try checking out PC World they have a variety of Flash Drives. Buy it online: ------------------------- Hope this helped you.

Sep 07, 2008 | Toshiba 1GB USB 2.0 High-Speed Flash Drive...

9 Answers

I had run imation lock on kingston 4 gb and now its says "Please insert the device or run this"


its a little tricky, just try it
  1. unplug ur usb drive
  2. double click the imation lock
  3. when the message appear "Please insert the device or run this utility as privileged user" plug the flash/usb drive quickly
  4. USB will start working
  5. run the imation lock again and disable the password protection
  6. delete the ugly imation lock from ur system
i hope u find it use full, plz give ur feed back at: masood@inbox.com

Jul 28, 2008 | Computers & Internet

4 Answers

Computer keeps on telling me "please insert a disk into drive E:"


try to rerfresh on MY COMPUTER then it will appear on E, if it won't open, right click then Explore.

May 07, 2008 | Toshiba 1GB USB 2.0 High-Speed Flash Drive...

1 Answer

Usb flash pen drive


Often it is due to electrostatic charges on usb. Unplug all USBs.Unplug PC from power cable for 10/15/ minutes. plug back computer to power outlet and restart. Plug back usb.
If it still does not work , flash memory may be faulty, test it on a different computer.

Mar 17, 2008 | Toshiba 1GB USB 2.0 High-Speed Flash Drive...

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98816 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...