Question about Printers & Copiers
Simply remove them..inspect them, and re install them..then do a calibrate and clean on the system..
Posted on Apr 27, 2008
Tips for a great answer:
If job prints from the wrong tray or on the wrong paper or specialty media, this is an indication that the operator panel menu settings do not match the media loaded in the tray.
Make sure the Paper Size and Paper Type specified in the printer driver match the paper size and type in the tray.
For further assistance, please contact Lexmark Technical Support
Feb 09, 2012 | Lexmark T644 Laser Printer
Try to re-seat the cartridges in the printer. Open the printer
cover > remove the cartridges > close the printer cover > re-brick you
printer by pulling out the power supply - black box behind the printer where
the power cord is plugged in, and re-plug after 10 seconds. When the printer
turns on, reinsert the cartridges and close the cover. Try to print a document
again to verify that the problem is fixed.
If that doesn't help, please follow the steps below to align the cartridges:
From the Maintenance tab, select Align to fix blurry edges. Your printer will then print a page and help align the cartridges.
Oct 05, 2011 | Lexmark X7170 All-In-One Scan/Copy/Fax and...
Feb 17, 2011 | Lexmark X7170 All-In-One Scan/Copy/Fax and...
Dec 29, 2009 | Lexmark All-in-One Printer with PictBridge
Oct 23, 2009 | Lexmark X2250 All-In-One InkJet Printer
Aug 30, 2009 | Lexmark X4270 All-In-One InkJet Printer
Jul 08, 2009 | Lexmark Z2420 Printer
May 17, 2009 | Lexmark X7170 All-In-One InkJet Printer
Jan 18, 2009 | Dell 962 Photo All-In-One InkJet Printer
Sep 05, 2008 | Lexmark Printers & Copiers
87 people viewed this question
Usually answered in minutes!