Question about Televison & Video

1 Answer

My union color television is dead only power red light is on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,622 Answers

Hello,
Swollen, Bulged, Bad Capacitor The main cause of this power up problem are bad capacitors on your power if the capacitor is bad
What you need for the opening of the television is Screw driver, Soldering iron(40watts+), Desoldering braid, Soldering wire, and capacitors.
Now lets talk about the specs, capacitors hold 3 important value:
1. The capacitance measured in uF(micro farads) (ex. 2200uF), 2. Voltage (ex. 10v), 3. Temperature (ex. 105°C)
Important Notes:
Flat panel Television power supply capacitors has 10v installed on the board and it is attached to a 12v bus which is causing to bulged.

Look at the bad capacitor and get the right information from it, remember uF, voltage and temperature. Mine, I only change 2 capacitors. It needed two 2200 uF, when I first saw my power supply it was really easy to spot the bad caps. Some Samsung LCD owners did went ahead replace all the capacitors on the power supply to make sure. Now if you’re like me, an inexperience solder, I would not recommend changing all the capacitors because to me it was time consuming for a noob(newbie) like me ^_^.

Few things to take note, always make sure you have the right polarity. Negative part is where the colored stripe on the capacitor.
But if otherwise, the power supply board is bad, you can try websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Hope this helpout...

Posted on Aug 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sony rear projection tv has started to blink.


Hello,

What is the color of the blinking light?

If the blinking light is green, it means you have to replace the lamp (bulb) of your TV as it is dead.

But if the blinking light is red, then it means your TV is having a power problem.

Good luck.

Apr 17, 2011 | Sony Televison & Video

1 Answer

I have sound, blue and green color, but no red. model R57W46


Change tv to another incomming broadcasting signal coaxal cable wire plug into it,might be lucky,the incomming signal wire is the problems.If it is not the incommming signal coaxal wire plug in.Than the tv RED color gun is dead,might have a dead CRT tube RED color gun.This problems is not easy to be fixed or determine.Should hire a tv tech to troubleshoot and rerpair.

Mar 16, 2011 | Zenith R57W46 57" Rear Projection...

1 Answer

Tv turns off red light flashes and i hear a chriping sound


This problems is also parts of tv convergence board have dead 2 STK convergence ICS and some or all the resistors dead too.This problems the 2 STK and some or all it resistors are completely dead that why u only have red flashing light and chirping sound only.If your tv have any life function left of the tv convergence board u would have only mis alignments of colors R,G,B lines,have colors shadows or 3D pictures look alike.The shop,will cost like $300-350 to get the tv convergence board fixed also fixed this problems too.

Jan 05, 2011 | Hitachi 53UWX10B 53" Rear Projection...

4 Answers

Blue will not focus causing "shadows". Magic focus will not solve the problem.


This tv have a problems call convergence,it dead.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jun 17, 2010 | Hitachi 53FDX20B 53" Rear Projection...

1 Answer

Picture


This tv have convergence problems,it dead.Red,green,blue misaligns colors,have colors shadows,3d colors pic like.All these problems are the convergence board have 2 STK convergence ICS some or all it resistors are dead.These parts must change to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jun 07, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Red pixels


They are are called dead pixels. A TFT monitor is built of millions of tiny lamps(LEDs) in matrixes of the tree colors, Red, Green and Blue, these have like any other electronics component a limited life span. When dead, sometimes they stop reacting to the color changing control signal and keep emitting only one color often red(IMO because the other two components are more stressed by the higher frequency). Unfortunately this phenomenon is irrepairable. :(

BR

Feb 28, 2010 | Televison & Video

1 Answer

When i turn it on it wont stay on, no picture or sound. The green light comes and then turns back to red, then no color (black)


Power supply board is dead.Must replaced to solved this problems.Tries Shopjimmy.com,Ebay.com for the power supply board part.

Jan 23, 2010 | LG 50PC1DRA 50 in. Plasma Television

2 Answers

Screen is black two green blinking lights 1 red


Ur power supply needed to be rebuild,like changing capacitors,extra..Or buy a new power board,because it dead.

Sep 13, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Lost green color, lights blinks


Ur high voltage is dead,FBT,flyback transformer is dead,the big black block of plastice with a red wire with a cap hook to a CRT(tv tube).Resoder for lost green color,by the crt yoke RED GREEN YELLOW connection to the main PCB board.Might also have to resolder crt board connection pins socket.

Mar 29, 2009 | Sony FD Trinitron WEGA KV-36HS420 36" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Cindy Wells

Level 3 Expert

5128 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...