Question about Janome Memory Craft 9000 Computerized Sewing Machine
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: janome 9000
I have a Janome 9000, was sewing and broke needle, replaced and broke another. I didn't have machine threaded, took out bobbin and would sew a little and stop saying thread broke. I took off top plate and started machine again, sew a little and stop saying thread broke. So I took out bobbin case and sewed again and stopped repeating the message. Everything looks OK, bobbin case and top plate. I guess I want to know if the timing could be off or do you think it is the computer part of the machine...Should I take it to the Sewing Machine Shop??
Posted on Jun 01, 2008
SOURCE: janomes sewing machine bobbin
Hi. Check to make sure the needle is in correctly. There is a flat side on the needle shank and that has to be facing a particular way. For most modern machines, the flat side of the needle faces to the rear, away from you, but it's always a good idea to check the manual to make sure on your machine. If the needle is bent, that can cause the same thing, but it's almost always that the needle is in wrong.
Posted on Apr 17, 2010
Tips for a great answer:
Mar 22, 2017 | Janome Sewing Machines
Feb 25, 2015 | Janome Sewing Machines
Mar 23, 2012 | Janome Memory Craft 9000 Computerized...
Jan 19, 2010 | Janome Memory Craft 9000 Computerized...
Nov 11, 2008 | Janome Memory Craft 9000 Computerized...
Feb 19, 2017 | Janome Memory Craft 9000 Computerized...
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: