Question about Maytag MDB6701AW 24 in. Dishwasher

1 Answer

I have a Maytag MDB6701AWS dishwasher and the control panel is not responding, the lock light is on but it is not responding. I had the same problem less than a year ago and they said the control panel was burnt and replaced it. I need to get the number of the part so I can purchase it and replace it without having to pay a lot of money as I did before. Do you recommend that I replace the control panel again or just get a new maching (not maytag of course)?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

I had no lights on my control panel, eventhough power was good.
I replaced the control panel ($265 part), it worked for 2 weeks, then I now have the same problem.
Frustrated, I am probably going to buy new from a different manufacturer.
Whirlpool/maytag does not warranty electronic parts if you do it yourself.

Posted on Feb 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag dishwasher mdbtt53aww2 will not start. The right side of the panel lights up. The left side does not light up. Anyone know what it might be???


Many electronically controlled appliances respond well to a simple reboot. Pull the plug and put it back in.

Report back!

Oct 25, 2016 | Maytag Dishwashers

1 Answer

Why doesn't it work?


Dishwasher Diagnostic Touchpad is Not Working,Maytag ...

? 8:28
https://www.youtube.com/watch?v=zex_g2TJRl4
Aug 6, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your Maytag Built-in Dishwasher which has this following issues: Touchpad System Is Not ...

Maytag Dishwasher Repair - Will Not Start or Complete a ...

? 5:06
https://www.youtube.com/watch?v=cfWUeh0ZtPY
Aug 9, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your trusty Maytag Built-in Dishwasher which has some of ... Dishwasher Diagnostic Touchpad is NotWorking,Maytag,Whirlpool ...

Top 638 Complaints and Reviews about Maytag Dishwashers

www.consumeraffairs.com > Homeowners > Dishwashers

Rating: 1.2 - ‎185 votes
Can't push a button to choose what cycle I want, it doesn't respond. .... After 2 1/2 years the control panel on my Maytag Dishwasher will not work. This is the 4th ...

Maytag Dishwashers - ConsumerAffairs.com

www.consumeraffairs.com > Homeowners > Dishwashers

Rating: 1.2 - ‎185 votes
My dishwasher just stopped working 1 year after purchase. .... Holding Control Lock or Delay for 3 seconds doesn't seem to clear the circuit board logic. Problem ...

Dec 12, 2015 | Maytag Dishwashers

1 Answer

Regency problems


follow this steps and fix it. God bless you

Touchpad and Control Panel

If the buttons don't work on the control panel the entire touchpad and control panel assembly may need to be replaced. If the display works but the dishwasher functions are all out of synch, or some of the buttons don't respond properly the entire touchpad and control panel might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number


Touchpad

If the buttons don't work on the control panel, the dishwasher touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.


Enter your model number to see parts for your dishwasher.
Help me find my model number


Main Control Board

The dishwasher has a main control board which regulates nearly every function in the dishwasher. If the control panel buttons don't work, and other causes have been ruled out, the main control board might need to be replaced.

Jun 14, 2013 | Maytag Dishwashers

1 Answer

I have a MDD8000aws dishwasher with three colored leds in the front panel above the handle. What does it mean when the middle light is flashing red. I never could find out what the lights were for. please...


The middle light means that the dishwasher is set for a 6 hr delay befor it starts. The light to the left is hi temp wash and the one on the right is control lock press and hold for 3 secondes to lock the controles. You can get the manual on the link below. Page 4

http://www.maytag.com/assets/product/MDD8000AWS_Use%20and%20Care_EN.pdf

Feb 22, 2011 | Maytag MDD8000AWS Builtin Dishwasher

1 Answer

I have a maytag quiet series 300 dishwasher. On the control panel there is a green light on next to a picture of what appears to be a lock with a number 3 in the middle of it. I am not able to use my...


press and hold the heated dry button 3 seconds it will unlock the dishwasher. That 3 with the lock around it show you that the dishwasher has been locked out to keep buttons from being able to be pushed. You can lock it and unlock it by holding the heated dry button 3 seconds.

Feb 07, 2011 | Maytag Dishwashers

2 Answers

My maytag 200 quiet series dishwasher has a button with the number 3 next to the start/cancel button and will not start. The 3 flashes but won't start? Any idea what that means?


The control panel has bee locked. Press and hold the heated dry button for 3 seconds until the light next to the lock "3" button goes off. This feature is to prevent small children from starting it. Locking the controls works the same way, hold the heated dry button for 3 seconds will turn it back on.

Dec 13, 2009 | Maytag 24 in. MDB5651A Built-in Dishwasher

3 Answers

Blinking lights, unresponsive


I went to the Maytag site looking for a manual. None existed for my model, but I looked up won't start under the FAQs. The advice said to push the cancel button twice. My model doesn't have one, so I just started at the left side of the control panel and pushed each button twice. pushing the dry button twice made the lights stop blinking. i pushed the wash button and the unit started.

May 08, 2009 | Dishwashers

1 Answer

Maytag dishwasher cannot choose cycle on light panel


hello hmm ok so no lights it sounds like your control panel after unplugging your dish washer check the panel for loose wires the panel is the part behind were your buttons are located will have to remove your back cover to access this if that's all good then try your power cord again make sure its not got any loose wires were it attaches into the dish washer have a nice day and good luck let me know if you find anything.

Mar 19, 2009 | Maytag MDB9600A Jetclean II Built-in...

Not finding what you are looking for?
Maytag MDB6701AW 24 in. Dishwasher Logo

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...