Question about GE WSXH208A Front Load Washer

1 Answer

Won't unlock I unknowingly had a fuse blow and my washer stopped in the middle of a load. I did not know why it stopped working at the time and got frustrated and jerked the door open causing the screws to come off but the thing that locks in from the door is still in there. So, it is saying it is still locked and no matter what I try I can't get it to come unlocked so that I can screw the thing back in the door. What can I do?

Posted by on

1 Answer

Try unplugginf it and open the soap door

Posted on Apr 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Maytag Atlantis MAV 7600CGW that keeps blowing the 10A fuse prior to the switch mechanism. This has happened 6 times in the last 12 months. Every time it is the 1st load after after a heavy load...


HI,
I have found the possible cause to your fuse problem, I would suggest replacing your lid switch to the unit, this can cause you fuse to blow. Item #3 below is the switch Part# is 22003804, I and hopeful this will correct the problem for you. Is part should con with the Item #7 in the picture also, replace them both, made even be a different color. I think gray is the color right now.
I hope this helps kidlmo_5.gif

Jul 28, 2011 | Maytag MAV7600 Top Load Washer

1 Answer

My Whirlpool Duet model (don't know the model number) washing machine front loader is having problems completing a normal load cycle. Please let me know what this "FH" signal means and I will try...


FH means there is no water getting in the washer. Make sure both fill valves are working by selecting first hot then cold if no cold. If one or the other is not working then replace fill valve( or clean if plugged)

Oct 28, 2010 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Fuse blown on Maytag washer


Could have been a surge dont think its anything to worry about ....run and keep an eye on it ....

Apr 12, 2010 | Maytag PAV2300 Top Load Washer

1 Answer

Washer fills back up with water


sounds like a valve is not shutting off if you have two feeds it should be easy to find which one either the water will be hot or cold quite easy to change have to take lid off look on search engine for valves for your make and model should be very reasonable price.

Mar 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My washer stopped in the middle- and wont turn back on- full of water right before the spin cycle! I have checked the breaker, unplugged it, pulled the knob and tried to recycle it- NOTHING! it is only 7...


It doesn't work at all If your washer doesn't seem to work at all, check these: No power Lid switch No power Check to see whether power is getting to the washing machine. Is it plugged in? Has a fuse blown or is a circuit breaker tripped? Lid switch If the lid switch is defective, your washer can't spin and may not function at all. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washer to get to the switch. If it's defective, you need to replace it. Some machines have a special lid-switch fuse near the lid switch, inside the control panel. If this fuse blows, the unit won't fill with water until you replace the fuse.

Jan 19, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

IMaytag neptune washer stops at every cycle


Unplug the washer for 10 min to reboot the curcuit board. This will clear the little brain of any unwanted commands. Selecting too many cycles in a short period of time in frustration can overwelm the little brain. This can also happen with power surges from the electrical company. Undervoltage or overvoltage can cause similar problems. Rebooting clears the memory in the board and starts from scratch.

Apr 27, 2009 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Kenmore elite front load washer


I HAVE A KENMORE ELITE WASHER AND IT STOPS IN THEN MIDDLE OF THE CYCLE AND DOESN'T RISNSE. THE DISPLAYS SHOWS F21. CAN YOU LET ME KNOW WHAT THIS MEANS?

Sep 22, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Roper washer issue


next time it stops raise lid on right side at edge of opening will be a small opening where lid switch is push down switch with pencil or something small enough to fit if it starts working replace switch ..if switch is not at that location may be under hinge left rear if that is the case ck hinge screws

Aug 20, 2008 | Roper RAS8445KQ Top Load Washer

1 Answer

Washer stopped dead in the middle of cycle


CHECK ALSO the sensor switch underneath where the door close , you gonna need a tester for this task ,hope this helps AJ

May 05, 2008 | Hotpoint WMA13 Front Load Washer

2 Answers

Keeps fusing


Probably the heating element it sometimes absorbs water, tracks down to earth and blows the fuse

Jul 10, 2007 | Hotpoint WD62 Front Load Washer / Dryer

Not finding what you are looking for?
GE WSXH208A Front Load Washer Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...