Question about Pentair MINIMAX NT TSI IGNITER

1 Answer

Red service light on starts to ignite then turns off red service light comes back on cleaned filter about 12 psi

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pentair Master
  • 6,498 Answers

Possible bad pressure switch or plugged line

Posted on Oct 07, 2017

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jandjsay
  • 25 Answers

SOURCE: Hayward Navigator moves very very

Make sure to keep the leaf canister and pump basket clear. Another thing to check is; make sure the screws that hold on the pods(the "flippers" on the sides) are Really tight. Those need to be cranked down pretty hard to ensure that they can move the cleaner along.
www.cpo2go.com

Posted on Dec 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Red power, blinking red temp


Hi,

if the Lamp error and Temperature error lights are flashing red this means that there are two separate errors.

  • A flashing lamp light means the lamp failed to ignite. It could be a lamp driver problem or lamp failure. Replace the lamp to resolve the issue. If the issue is not resolved, then service the projector.
  • A flashing Temperature light signals a fan error. Turn the projector off and allow it to cool down. If the light is still flashing after the projector is turned back on, service the projector.
Goodluck..

Feb 25, 2008 | Hitachi CP-X250 Multimedia Projector

1 Answer

Thermoheat forced air heater hard to start after sitting overnight or for extended time. It blows diesel out pressure is 3.5 everything turns on just won't ignite. after turning it off an on several t


The pressure should be higher than 3.5 psi.
You have an output filter under the rear plastic cover that is held on with the 4 screws.
Check that filter to see if it is dirty.
The PSI for the heater should be on the side of the heater.

Nov 22, 2014 | Heating & Cooling

2 Answers

Pentair MasterTemp 250 Natural Gas Heater with "Service System" issue


this heater will display 2 red light related problem 1-service the system mean you need to clean you filter, and service the heater mean it may be a problem with the heater this 2 you will be able to see it in key pad control the heater ,now reset the board and see what happens (CUT THE POWER ON/OFF UNCE )

Jun 09, 2013 | Pentair Pool & Spa

1 Answer

The low tire light is on


  1. Check and fill all the tire to the proper PSI (usually 35 PSI)
  2. Now open the drivers door.
  3. On the side of the dash is a little access panel that pulls right off.
  4. Now you will see a little red button to reset the low tire pressure light.
  5. First turn the ignition to on (don't start the car).
  6. Now press and hold that button for 10 full seconds until the low tire light begins to blink.
  7. Now release the button and wait for the light to stop blinking.
  8. Now turn the ignition off and back on.
  9. The light will now be off.
  10. Replace the little access panel.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jul 20, 2011 | 1999 Buick Regal

1 Answer

Red intake light comes on and dishwasher will not drain, model g 843 scvi


The manual is available here: http://www.miele.ca/miele/canada/OperatingInstructions/manuals.asp?ParFolder=Dishwashers&SubFolder=Previous%20models . Scroll down through the list to the G643 G843 Incognito. The maintenance items listed below are detailed on page 44 and beyond of the manual.

The Intake light is also the Drain error light. If the light is flashing, then turn off the dishwasher and clean the triple filter, the drain pump and the non return valve and make sure that there are no kinks in the drain hose.

Make sure the water is ccoming in at a pressure above 4.5 psi. Also make sure that the water valve is open and clean the water intake filter.

The final possibility is that the Waterproof system has tripped and you need a Miele technician to service the unit.

I hope this helps.

Cindy Wells

Feb 19, 2011 | Miele 24 in. Incognito G843SCVi Built-In...

1 Answer

Red lamp or heat light is flashing while projector is off. Can't be sure which it is because it is mounted 16' up. I've cleaned projector & filter with canned air from 12' ladder and red light stops...


Hi,
Here is some information on this model which I hope will help...
The lamp indicator lights when the lamp is due to be replaced. It will flash if a circuit abnormality is found.
The temp indicator lights if an abnormal temperature is detected. If it goes too high it will shut down flash.
The lamp indicator is furthest away from the power switch if that helps.
If the lamp timer was approaching the end of the lamp life you would see a REPLACE LAMP nag screen when the projector is turned on. The fact that you have not mentioned this suggests that this is unlikely to be the problem.
The filters on the model are on the underside. There is a removable panel directly under the lens. You should not use canned air as you are blowing dust into the projector. It is recommended that you use a vacuum cleaner. Filters should be cleaned every 100 hours and replaced when the projector is relamped. You can wash the filter by hand with water only, ensuring it is dry before replacing it. Do not run the projector without the filter in place.

Feb 19, 2011 | Panasonic Projector Lamp for PT-LB50...

1 Answer

The projector turned itself off after couple hours of use and the Temp. red light came on. Power Light turned red instead of orange as usual. After 3hrs I turned it back on, cleaned the dust off the fan...


There are three temp sensor inside the projector and now your projector need full service but if the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will illuminate and the projector's power will turn off (the TEMP indicator will flash after the power is turned off) The air filter should be cleaned every 100 hours of use.
If you clean the filter with a vacuum cleaner to clean off any accumulated dust. then your projector working normally

Jan 03, 2011 | Panasonic PT-LB50U Multimedia Projector

1 Answer

2007 Yamaha Ybr 125 fuel pump not working


Hi, Simon_anthon the following is a systematic procedure for diagnosing fuel pump issues designed to keep "DRACHMA" to a minimum. If you need parts check with Amazon and eBay first to keep costs down.
1. If your pump does not turn on check the pump fuse and relay and all wiring including connectors for corroded, broken, or loose pins/sockets.
1. Normal fuel pump pressure is 3-5 PSI.
2. Check any rubber or plastic tubing for age-related pinholes by removing and plugging the ends that connect to the fuel valve and then turn on the ignition switch and watch for fuel streams exiting the pinholes, if any exist, replace tubing as necessary.
3. Check for a clogged a primary fuel filter that comes off the bottom of the pump to screen out big rocks and clean as necessary.
4. Check for a clogged secondary fuel filter that's outside if applicable by removing it from the system and replace it with a short splicing tube turn on the ignition switch and recheck fuel pressure if pressure increases to normal pressure you need a new secondary filter.
5. If all the above check out OK and the pump is not functioning properly then you need a new fuel pump.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
ybr 125 Starting Problems
Yamaha YBR 125 Hot day starting problem
Yamaha YBR125ED 2005 Service Manual
OEM parts for Yamaha
Yamaha YBR125ED Owner Manual

Apr 24, 2010 | 2007 Yamaha Ybr 125

1 Answer

Yokr gas furnace will not start up


You could have the gas co to check to preassures at or before the unit. Too low or high a preassure and the gas valve cant regulate the proper flow>>Natural gas to the house needs at least 5"-wc psi ---to the gas valve needs 7.5"--wc and while its calling for heat the orrifice needs 3.5" -wc psi! Propane needs 11" wc psi to the valve on the unit and 11' -wc psi to the inside furnace.

Dec 21, 2009 | Heating & Cooling

Not finding what you are looking for?
Pentair MINIMAX NT TSI IGNITER Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentair Pool & Spa Experts

Pj Kiley
Pj Kiley

Level 1 Expert

21 Answers

Jay Finke
Jay Finke

Level 3 Expert

1363 Answers

Bill Jordan

Level 2 Expert

372 Answers

Are you a Pentair Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...