Question about Emerson MW8102SS 1100 Watts Microwave Oven

1 Answer

DOESNT WORK I MEAN THE CLOCK DOESNT EVEN LIGHT UP...IS THERE A FUSE OR SOMETHING

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 975 Answers

Yes !! check for a circuit breaker type of fuse , or a blown fuse, replace it and plug it again . hope this helps

Posted on Apr 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My microwave runs and sonds normal but doesnt heat anyhing


First: Check the high voltage fuse (this fuse connects between the
high voltage capacitor to one pin of the magnetron( careful this capacitor must be discharged)), replace fuse if it blown.
Second: If this fuse blown again, the magnetron must be replaced
(shorted).
Note: These answers only apply when the microwave are working with normal sound but NO heat, If strange sound occurred that means could be something else faulty!
Good luck

Sep 08, 2014 | GE Spacemaker JVM1640SJ Microwave Oven

2 Answers

GE Model # JVM7195SFSS microwave.


Check the internal ceramic fuse on the circuit board. Sometimes one section will work while another won't. I'm not sure if this model has a rear mounted thermal fuse, but the models with the inline thermal fuse will cause a similar issue.

Jul 04, 2014 | GE XL1800 1100 Watts Microwave Oven

1 Answer

GE Spacemaker microwave makes groaning sound when start button is pressed for a second or two then blows the internal fuse. After replacing the fuse everything seemed to work, lights, exhaust fan, cl


Could be a lot of things but most probably a shorted high voltage diode assembly. If not that then the magaetron or capactors. Remember be careful there are high voltages even when the oven is unpluged. The capactors are usually charged and must be discharged. If you don't know what yor doing then time to get a qualfied tech.

Good luck

Feb 14, 2014 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Lights on but keypad not working


The lights in the oven are seperate from the one in the control panel/clock. IF the control panel and clock dont work then it is not something that is easy to fix. Could be the fuse of the controller board.

Sep 30, 2013 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

My PVM2070SM1SS doesnt turn on or set clock but controll pad lights and exhaust fan and lights work secondary switches seem fine along with the 2 fuses can you help?


follow this steps and fix it. God bless you

  1. Inspect the power cordUnplug the power cord and check for voltage at the outlet. Also inspect for damage, shorts, or burn marks that can be a possible safety hazard.
  2. Bad door switchIf your microwave does not work at all and you know everything is plugged in properly and the outlet is functioning, then also check the door hooks and the door release button. Using a volt-ohm meter on RX1, check your terminals. When your microwave door is closed you should have a reading of zero. Once the door is open the reading should change to infinity. If these readings do not match up, replacement of the door switch is necessary.
  3. Blown fusesTo determine if your fuse has blown out, which may attribute to your microwave not running, you need to pull the fuse out using a pair of fuse pullers. Lay it down and using a volt-ohm meter on RX1, check both ends of the fuse in question. If you do not get a reading of zero, then you will need to replace the fuse.
  4. Bad fan motorLocate the fan and remove the leads. Again using the volt-ohm meter on RX1, check the terminals. If an infinity reading is displayed, it means that the fan has gone bad and requires replacement.

Read more: http://www.appliancepartspros.com/repair-help/microwave-repair-help.html#1#ixzz2aSlPzBdA
http://www.appliancepartspros.com

Jul 28, 2013 | Microwave Ovens

1 Answer

I've replaced the fuse three times in my GE over the counter microwave. The clock, timer, lights work, but when I put something in the oven to heat, it immediately blows the new fuse. Is there something...


NO, MW can be LEATHAL.. If a fuse is blowing that means that you have a Phase to Earth fault BAD. In all likelihood the mangnetron is failing, or perhaps even the Power Supply is faulty. You need to have it serviced by a reputable service centre/man.
Ensure you get a firm "Quote" before proceeding, and remember these days the cost of repair can equal or exceed the price of a new one.Yes they are right.

Jan 28, 2010 | GE Profile Spacemaker Over-the-Range...

1 Answer

Emerson microwave, #MW8119SB, push start button to start cooking


Replace the fuse with a ceramic fuse from Home depot! costs less than $3 and it will fix the problem. I had all the same problems as everyone else, you name it my microwave had it! you must remember replace it with a ceramic fuse! not a glass one. I know people say its the switchboard and all that nonsence but I promise you, the fuse plays a majoe roll in the microwave not working properly. Even though it doesnt look broken, a junky fuse can cause your appliance to do very strange things. I replaced mine 6 months ago and it works like its fresh out of the box.

Apr 08, 2009 | Emerson Black Microwave Oven

1 Answer

My microwave quit working


You have obviously damaged the circuitry. Service is expensive. Unless the unit is under warrantry my advice is to replace the oven. The newer ovens are very reasonable and have great features. Check Home Depot.

Ray

Dec 31, 2008 | Maytag Microwave Ovens

1 Answer

Emerson Microwave (mw8992rd) not heating up


I have replaced the main fuse on this model. Though blown main fuses are common in this model, it will not even turn on when they blow, so your problem is most likely NOT a blown fuse. I had heard of your problem so, when replacing the main fuse inside one, I looked for additional fuses and saw none. The store was wrong. Even if it were a fuse, the security Torx screws mean that you couldn't replace the fuse anyway.

This microwave seems to have been haphazarly been recommended by Consumer Reports, but it is terribly unreliable. The turntables break when popping popcorn, the main fuse repeatedly blows, and they also stop heating.

Oct 19, 2008 | Emerson MW8985W Microwave Oven

2 Answers

Microwave stopped working


Generally, you get something unless the fuse inside is blown. There is generally a fuse inside the unit when you remove the button package. First, make sure that the outlet you have is good. Plug something else into it and see that it works.

Dec 16, 2007 | GE Spacemaker JVM1640SJ Microwave Oven

Not finding what you are looking for?
Emerson MW8102SS 1100 Watts Microwave Oven Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Emerson Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...