Question about Whirlpool GH9185XL Microwave Oven

1 Answer

Whirlpool microwave oven model gh5184xpq

Oven turns on ,hear a crackeling noise then oven shuts off and f7 code comes up on display

Posted by on

  • Anonymous Mar 22, 2014

    oxnard ca area call 805 984 7820

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Models: GH9177XL GH5176XP GH5184XP GH6178XP GH6177XP
KHHS178L KHHS179L
Microwave will not operate (cook). F7 error code
appears on the display.
Electrical circuit interruption between L1 and Neutral in
the microwave inverter circuit.
Possible reasons:
1. Check door, hinge and cavity front alignment and adjust
as needed.
2. Check the operation of all interlock switches.
3. Check over temperature protector for the magnatron.
4. Check all Cavity Thermostats for closed circuit.
5. Unplug the oven for at least 40 seconds. If this solves
the problem
A. Check the Cooling Fan for proper operation or
blockage
B. Check the resistance of the magnetron thermostat.
It should be 0 Ohms, replace if necessary.
6. Check that the control cable to the 1100 watt inverter
is properly connected to plug P2 on the display PCB
& Adjust or Reconnect
7. If interlock switches operate correctly, replace 1100W
inverter.
8. If problem persists, replace control assembly.

Please let me know if you need any more help or have further questions about anything that I have posted. I would be glad to help

thanks

Posted on Apr 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a whirlpool microwave oven over the range. Model GH 5184xps-4 when I press start, it comes on for one second then it shows a code -F7- and stops


TOUCH PANEL & MICROCOMPUTER BOARD TEST FOR WHIRLPOOL....

The microwave oven may be provided with a self diagnostic routine that can be operated

through the touch pad keyboard. To enter the self-diagnostic routine:

1.While pressing the CANCEL keypad:
a) Open the oven door.
b) Unplug the microwave oven for 2-seconds and plug it back in.
c) Release the CANCEL keypad and close the oven door. You will see the following display.

CHART
NOTE: The humidity sensor test results will appear on the display after 8-seconds.If the tests are successful, "OK " will be displayed. If one or more of the tests fail, "ERR " will be displayed.. 2.When a keypad is pressed, a number according to the test chart will be displayed. When no keypad is pressed, a blank "O" (square) is displayed...

POWER FAILURE & FAILURE CODES
Power Failure: After a power failure, the WELCOME screen will be displayed.

F2 Keyboard Failure: Refer to the Tech Sheet and conduct a touch panel continuity test.

F3 Humidity Sensor Failure: Refer to the Tech Sheet and test the sensor.

F6 Microwave Relay Failure: Check the microwave relay.

F7 Microcomputer Board Failure: Change the microcomputer board.


Hope helps.

Apr 12, 2011 | Whirlpool Microwave Ovens

1 Answer

Problem with the Whirlpool GH5184XPQ 1100 Watts Microwave Oven: In turning the microwave on this morning, a faint electric sparking was heard. Upon shutting it off and opening the door an acrid burning...


The problem is that the magnetron is arcing when it is running and it has found a couple bare spots 'exposing the metal'. The microwave uses a special industrial white enamel paint to prevent arcing, it is very important that the oven be removed from service until the situation is rectified otherwise there is a danger of shorting out the magnetron.

Feb 22, 2011 | Whirlpool GH5184XPQ Microwave Oven

1 Answer

Microwave hood combination, model # MH9181XM, is not heating anything and displays an error code of F7


Hi,


Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Basic
Microwave Oven Troubleshooting Tips

heatman101


]-]-]-]-]-]-]-]-]-]-]-]-]-]-]-

Feb 20, 2011 | Whirlpool Microwave Ovens

1 Answer

Whirlpool Microwave error F3H


F3H Humidity sensor failure 1. Unplug microwave oven or disconnect power.
2. Connect a new sensor to the board (at P5).
3. Plug in microwave oven or reconnect power.
4. If no failure code appears when starting sensor function:
 Unplug microwave oven or disconnect power.
 Replace old sensor.
5. If failure code appears when starting sensor function:
 Unplug microwave oven or disconnect power.
 Replace power supply board.
6. Plug in microwave oven or reconnect power.

Aug 04, 2010 | Whirlpool GH5184XPQ Microwave Oven

1 Answer

F7 Error


This is schematic:
http://www.servicematters.com/docs/wiring/wiring_main.htm
But your correct model # is: GH5184XPS4

F7 Power to magnetron
interrupted
1. Check the door, hinge and cavity front alignment. Adjust as needed.
2. Check the operation of all interlock switches.
3. To check the over-temperature protection for the magnetron, unplug
microwave oven or disconnect power.
4. After 40 seconds, check to see whether this solves the problem.
5. If this solves the problem, check the cooling fan for proper operation or
blockage.
6. Unplug microwave oven or disconnect power.
7. Check resistance of the magnetron thermostat. It should be close to
0 ohms. If necessary, replace magnetron thermostat.
8. Check that the control cable to the 1100 watt inverter is correctly connected
to plug P2 on the display PCB. If necessary, adjust or reconnect.
9. If interlock switches operate correctly, replace 1100W inverter.
10. If problem persists, replace electronic control.
11. Plug in microwave oven or reconnect power.

Dec 06, 2008 | Whirlpool GH5184XPQ Microwave Oven

1 Answer

We have a whirlpool GH5184XPS-4 microwave that we are getting an F7 error on. We removed control panel and parts of the board were scorched. we resoldered in loose parts still have smae problem


From the technical sheet usually located behind the control panel or grille:

F7 Power to magnetron interrupted

1. Check the door, hinge and cavity front alignment. Adjust as needed.

2. Check the operation of all interlock switches.

3. To check the over-temperature protection for the magnetron, unplug microwave oven or disconnect power.

4. After 40 seconds, check to see whether this solves the problem.

5. If this solves the problem, check the cooling fan for proper operation or blockage.

6. Unplug microwave oven or disconnect power.

7. Check resistance of the magnetron thermostat. It should be close to 0 ohms. If necessary, replace magnetron thermostat.

8. Check that the control cable to the 1100 watt inverter is correctly connected to plug P2 on the display PCB. If necessary, adjust or reconnect.

9. If interlock switches operate correctly, replace 1100W inverter.

10. If problem persists, replace electronic control.

11. Plug in microwave oven or reconnect power.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 06, 2008 | Whirlpool GH5184XPQ Microwave Oven

1 Answer

Display has a f2 code on it. whirlpool oven is model mh1150xm and less than 3 years old.


determined from whirlpool that the f2 display is from the control circuit board. the board's problem is intermittent and needs eventually replacing. not covered by warranty. determined that whirlpool has reduced the warranty for the electronic circuits in its appliances from 5 to 1 year. this is great for consumer confidence in whirlpool. have had trouble with 2 other new whirlpool appliances. probably will not buy another whirlpool appliance.

Aug 01, 2008 | Whirlpool GH5184XPQ Microwave Oven

2 Answers

Whirlpool GH5184XPQ 1100 Watts Microwave Oven Fan Won't stop running


If it's new, it should still be under warranty, so I would contact Whirlpool at http://whirlpool.com/custserv/index.jsp

We're happy to help and we appreciate your thoughtful rating of our answer.

Mar 12, 2008 | Whirlpool GH5184XPQ Microwave Oven

2 Answers

Microwave troubleshooting


I found the fix to the F3H error on another site. Just turn the power to the microwave off for ~2 minutes at the circuit breaker, and then turn it back on. Microwave will start working again then.

Feb 23, 2008 | Whirlpool GH5184XPQ Microwave Oven

Not finding what you are looking for?
Whirlpool GH9185XL Microwave Oven Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Whirlpool Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...