Dryer rotates, but there is zero heat. Kenmore Series 80, model 0104806

This should help:


If you need further help, reach me via phone at https://www.6ya.com/expert/timothy_c6f309c0f75b6f43

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101

The belt around the drum has come off or broke. The front of your dryer will have to come off to inspect

I had an identical problem to yours this weekend with my Kenmore dryer. There were 2 problems.

1. Timer was broken. Does not advance to "OFF" position on timed dry, however it still works for auto-dry.

2. Thermal fuse was blown. Upon replacing, dryer heated up normally.

I believe when the timer broke, the dryer had kept running and blew the thermal fuse. On Sears' website, thermal fuse is $5.30, timer is roughly $80.

Kenmore 70 Series gas dryer, M# 110.76752500

Some repair pix with manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

its the timer

If you still need help please post your model number. Gas/Electric?
Eric

heater or stat

Where is the location of the heating element for a Kenmore 80 series dryer heavy duty model # 77834795

ck the thermo fuse then ck the gas valve for power and the igniter to see if its broken probley igniter if you dont see a glow comeing from it