Question about D-Link DI-634M Wireless Router (DI634M)

1 Answer

How do I set up a password to secure my wireless network

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 94 Answers

You need to log into the wireless router either by a computer that successfully connects wirelessly or by physically connecting with an ethernet cable. Once connected, log into the router by open a web browser (Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari), and typing the router's address (usually 192.168.1.1 or 192.168.0.1) into the Address (or URL) line. The default usernameand password is usually "admin" & "admin" or "admin" & "password". Once successfully logged in, look for a tab or link that says "Wireless" or "Security". You'll be able to change whether security is enabled or disabled, and the password associated with it. Your security options are WEP or WPA (or WPA-PSK). WPA-PSK is the most secure, but WEP is also an acceptable choice. Select the security option of your choice and either enter text into the passphrase generator or choose your own password and type it into one of the security key text fields. If you use a password that is not a plain english combination of letters and numbers, be sure to write it down so that you can enter it as needed on other wireless devices that need to access your router (ie-pda phones, game consoles, laptops, desktops, etc). Be sure to save changes so that the security settings and password is saved.
Let me know how you make out.

Posted on Sep 06, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Password settings

Greetings!

I am presuming that the address you are using, 192.168.1.1 is the address from the user manual. This may not be the address that is actually assigned to your router however.

The Linksys Router can be configured in one of two ways, either with a static IP Address or by DHCP, a service that automatically assigns an IP from a DHCP Server on your network.

An easy way to test this is to go to a PC on your network that you know is functional and uses the Linksys Router as its network access point and open a command prompt from the start menu (start/accessories/command prompt).

At the command prompt type in tracert www.fixya.com and hit enter. The first address that you see in the traceroute is the IP address of the Linksys Router.

Write this down IP down and then plug it into your web browser. A login prompt window will appear on the screen. Do NOT enter a login name in this prompt - the default for admin is nothing. Simply input the admin password and the web browser will open to the admin page on the router.

As you are configuring a new network security password and protocol be aware of a few things:

1. WEP and WPA are two types of security used on these routers. Of the two, WPA is the more secure, however there may be devices and or clients on your network that do not support WPA. Prior to selecting WPA verify that there are no devices that cannot use that standard.

2. If you are adding a new security profils (password) and retaining the existing login passwords (keys) then your network will continue to function as it has, however if you delete the existing keys (passwords) then you will need to go to each computer/device on the network and update each with the new login information.

Once you have decided upon the security protocol you intend to use (WEP or WPA) you must then do the following:

1. On the router admin page click WIRELESS and then WIRELESS SECURITY.

2. For WEP you will set the Encryption Size and then enter a passphrase. The router will generate a key in hex and you will need to write down this key and provide it to the users on your network. If you change the passphrase later the key will also change and you will need to repeat the above.

3. For WPA, you set the encryption type and then enter a passphrase. Provide this passphrase to the users as that is how they will authenticate using WPA.

Posted on Nov 15, 2007

Joed911
  • 4338 Answers

SOURCE: How do I set up a password to secure my wireless network??

Enabling the WEP for the Dell TrueMobile 2300 Wireless Router

Click the Start button.

Click All Programs.

Click Internet Explorer.
The Internet Explorer browser window appears.

Type the following in the Address line:
192.168.2.1

Click the Go button.
You are prompted for a Username and Password.

Type the following as your username:
admin

Type the following as your password:
admin

NOTE: If you previously changed your administrator password in the advanced settings of the router you will need type the password that you set.


Click the OK button.
The Dell TrueMobile Setup Page appears.

Click the Basic Settings tab.

Click the Wireless Security button on the left side of the page.
The Wireless Security window will appear.

For the highest level of security choose the 128 Bit encryption option.
You will have to type a name for your encryption key in the field to the left of the 128 Bit option.

Click the Save and Restart button on the left hand side of the page.
The Save and Restart window appears.

Click the Save and Restart button.
Your settings will be saved to the router.
More Secure
Configure the 2300 Wireless Router for WPA-PSK with TKIP Encryption.

Double-click on Internet Explorer.
The Internet Explorer window appears.
In the Address Bar type my.router or the default IP address 192.168.2.1.
Press the <Enter> key or click Go.
The TrueMobile 2300 password window appears.
Type the User Name and Password.
NOTE: The default user name is admin and the default password is admin.


Click OK.
The TrueMobile 2300 Wireless Router configuration window appears.
Click Basic Settings.
Click Wireless Security in the left-hand pane.
Click to select Enable Wireless Security.
Under Network Authentication, select WPA (Wireless Protected Access) from the drop-down menu.
Input a network key or password in the field to the right of WPA Pre-Shared Key.
NOTE: Your network key or password can use 8 to 64 characters using Hexadecimal digits or 8 to 63 characters using ASCII characters.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Nov 02, 2008

Junoon007
  • 1011 Answers

SOURCE: setting a new network security key for my Netopia 3341 wireless

check this link sir

Posted on Nov 26, 2008

azz949
  • 55 Answers

SOURCE: NETGEAR WGR614v7 Network Security key

Hi, you need to connect to the routers admin pages to configure the wireless settings and security. Check out this page:-
http://kbserver.netgear.com/kb_web_files/n101676.asp

When you get to step 6, click the WPA-PSK security setting and it will give you a box to type in a password of your choice, make it memorable but difficult to guess, so a mixture of numbers and letters. I think its a min of 8 characters.
Hope this helps..

Posted on Jan 25, 2009

  • 1 Answer

SOURCE: how to secure zyxel 600 wireless network

My nissan p 11 swithces off when in motion. plz asstst

Posted on Jun 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgotten password for wifi network


Which operating system ??
Your wireless Internet password is the encrypted security pass phrase that was set up when you installed your wireless router.

Your router allows you to access the Internet.
If you have access to more than one wireless network, you may need to remember multiple passwords.

If you happen to forget one password, you have two options: reset your password or locate the current password.

Windows 7 allows you to view the security characters of all your wireless network passwords.
Click the "Wi-Fi" network icon located on the Window's taskbar.


Right-click the name of your network's "SSID" name and select "Properties" from the drop-down menu.


Click the "Security Tab." The network security key is now visible but unreadable.


Click the "Show Characters" check box and this will reveal your wireless password.

http://www.thewindowsplanet.com/939/how-to-recover-wi-fi-network-key-in-windows-7.htm

or
Reset My WiFi Password

Wireless networking is a common feature in homes and offices.
Wireless routers provide access to a single Internet source, and wireless passwords ensure that only select users can access the network.

If a password is forgotten or lost, the password can be recovered or reset by accessing the router's Web-based settings menu.

Most wireless routers also have a reset button, which is capable of returning the router to its default settings which includes resetting the password.

Connect to your Wi-Fi or attach your computer directly to the router with an Ethernet cable.
Open your Web browser.

Enter the default address of your router.
The default address is listed in your user manual or on the product website.

Linksys and 3Com routers typically use "192.168.1.1" while Netgear routers use "192.168.0.1."
Enter your username and password.

Many routers use "admin" for the username and password by default.
Locate the wireless security settings. Disable the wireless security.

Reset to Factory Defaults

Locate the reset button on your router.
Typically the reset button is a small indented hole on the back of the device.

Insert a long thin object such as a paperclip and hold down the reset button for 30 seconds to revert the router to its factory default settings.

Open your Web browser.
Enter the default address of your router.

The default address is listed in your user manual or on the product website.
Linksys and 3Com routers typically use "192.168.1.1" while Netgear routers use "192.168.0.1."

Enter your username and password.
Many routers use "admin" for the username and password by default.

Locate the wireless security settings and add security as necessary.

How To Reset Your Router's Password
http://www.lostintechnology.com/how-to/how-to-reset-your-routers-password

Jan 06, 2014 | Computers & Internet

Tip

Wireless security issue. How to secure the network ?


To secure the wireless network or to change any settings on the router you will need to access the router set up interface.
Open the set up interface of the router . Make sure that your computer will be connected to the router with the Ethernet cable.

Click here for step by step instructions

Onceyou open the set up page of the router , you will find the place tochange the wireless settings of the router. In case of Linksys wirelessrouter , you will see the Wireless Tab at the top.
SSID :It is the name of the wireless network. This name will be shown on yourwireless computer or the wireless device so that you can identify yourown wireless network. All the routers come with their factory defaultsettings. For example , the Linksys router will come with the Linksysnetwork name.
It will be better to change the wireless network name.
Wireless Security
Change the security mode to WEP.This security type is supported by all the operating system. Whenchange the security mode to WEP, you will find the Network key box totype the network key. Do not type anything in the Passphrase box. Typeyour network key in the Key 1 Box. If you set the encryption to 65bits, your network key will be 10 digit hexadecimal number. that meansyou can use the combination of 0,1,2,3,4,5,6,7,8,9 and lettersa,b,c,d,e,f only. remember it should be exactly 10.
If you set theEncryption to 128 bit, your network key will be the combination of 26digits. You will need to remember the network key.
WPA
This is one of the most secured type of encryption.
Openthe set up interface of the router. Change the wireless security modeto WPA personal. You will find the passphrase box. in this box you cantype any password for your wireless network. The password should be thecombination of number and letters and it should be 8 or more than 8characters.
This security type is supported by WINDOWS XP SP2 and above Operating system.
WPA2
This is one of the highly secured type of encryption.
Openthe set up interface of the router. Change the wireless security modeto WPA personal. You will find the passphrase box.In this box you cantype any password for your wireless network. The password should be thecombination of number and letters and it should be 8 or more than 8characters. Keep the Algorithm to TKIP.
This security type is supported by WINDOWS VISTA and above.
Once you change the wireless settings on the router , try to connect to the new wireless network .

Click here for step by step instructions

on Dec 04, 2009 | Computers & Internet

1 Answer

WIRELESS GATEWAY


How to View or Change Your Wireless Network Password


Symptoms:


You have lost or forgotten the password to your wireless network
You have lost or forgotten the password for the router, access point or other network device
You left the default password or used a weak password and someone has hijacked your network



Depending on the router, you can either view or reset the wireless network password (also referred to as the passphrase or security key) if you can log into the router. Some routers mask the wireless network password, so while you cannot recover it, you can enter and save a new password.


If you cannot log into your router because you have forgotten the router password or your network has been hijacked, please refer to "Lost or forgotten password for router or other device" below.


To view or reset a wireless network password:


Launch your Internet browser and type http://www.routerlogin.net in or http://192.168.1.1 or http://192.168.0.1 the address field for your browser. Enter the router's username and password.
The default username is admin, the default password is password.
From the left-hand navigation menu of the Router administration interface, select Set Up > Wireless Settings
Note: On some routers this option will be under BASIC > Wireless.
From the center screen, you find the current wireless security settings under the Security Options heading.


If the wireless network passphrase is visible, review it and use it to log devices onto your network.
If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.


Read more about Securing your Wireless Network.
If you cannot log into your router:


- If you were routed to the NETGEAR website or getting the "Page cannot be displayed" message when trying to login to router, make sure you are connected to the NETGEAR router. Check your wired connection and make sure cable is securely plugged in and LED is on. If wireless adapter is on, make sure you are NOT connected on a different wireless network.


- Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default access information to reconfigure your router settings. NOTE: Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!


See the following articles for more information:


Secure Your Wireless Network: WPA/WPA2 (Recommended)
Reset and Restore a NETGEAR device to Factory Default Settings
Default Password for NETGEAR devices

Jul 19, 2012 | Gateway Computers & Internet

1 Answer

I cant enable the password


Hi Friend,

In order to enable wireless security password, please follow the steps:

1.Type 192.168.1.1 in the address bar of the web browser and hit enter
2.Enter the username and password. If you have not set the router password then leave the username blank and type admin in password and hit enter.
3.Click the tab Wirelss in the setup page and fill the sections
Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Wireless Channel-6-2.437GHz
Wireless SSID-Enabled and click Save Settings

4.Click Wireless Security and fill the sections as mentoned
Security Mode-WPA Personal
PA Algorith- TKIP
WPA Shared Key-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings

You have now set a password to your wireless network and is secured. Enjoy

Regards
Chiranjeet

Sep 16, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I am trying to connect another computer to my wireless network but i do not know my netgear code, where do i find this?


Netgear code? Can you be more specific?

Are you referring to the password required to connect to your wireless network called "Netgear"? I assume you're being asked for a password on the 2nd computer when trying to connect to the wireless network called "Netgear".

  1. In a web browser, enter the router's IP address - either http://192.168.0.1 or http://192.168.1.1 by default.
  2. When prompted for a Username and Password, enter the default username and password (admin; password) unless you have already changed it. NETGEAR recommends changing the default password to increase the security of your network.
  3. Select Wireless Settings from the Setup menu in the left-hand navigation bar.
  4. Under Wireless Network, enter your desired network name in the Name (SSID) box. This is currently set to "Netgear" most likely.
  5. Under Security Options, select WPA-PSK [TKIP] + WPA2-PSK [AES].
  6. Under Security Options (WPA-PSK + WPA2-PSK), enter your desired network password into the Passphrase box.
    • WRITE DOWN or KEEP NOTE of your network name, security option and passphrase - you will require them to connect wireless computers and devices to your network.
  7. Click Apply to save the settings.
Once you've set this password, you can use it to connect to "Netgear" on your second computer.

Jul 25, 2010 | NetGear WGR614 Wireless Router

2 Answers

People are able to get online using my router how do i stop that


You will need to secure the wireless network. that means you need to put a password on the wireless network. Once you secure the wireless network, no one will be able to get online using your network.
To secure the wireless network, you will need to open the router set up page. on this page you will find all the wireless settings of the router.
Before changing any wireless settings on the router, make sure that your computer will be connected to the router.
If you do not have any computer connected to the router,then you will need to connect the computer to the router with the cable.

Click here for easy steps to secure the wireless network

Feb 26, 2010 | NetGear WGR614 Wireless Router

1 Answer

Need to change password from previously changed password


To secure the wireless network or to change any settings on the router you will need to access the router set up interface.
Open the set up interface of the router . Make sure that your computer will be connected to the router with the Ethernet cable.

Once you open the set up page of the router , you will find the place to change the wireless settings of the router. In case of Linksys wireless router , you will see the Wireless Tab at the top.

SSID : It is the name of the wireless network. This name will be shown on your wireless computer or the wireless device so that you can identify your own wireless network. All the routers come with their factory default settings. For example , the Linksys router will come with the Linksys network name.
It will be better to change the wireless network name.


Wireless Security

Change the security mode to WEP. This security type is supported by all the operating system. When change the security mode to WEP, you will find the Network key box to type the network key. Do not type anything in the Passphrase box. Type your network key in the Key 1 Box. If you set the encryption to 65 bits, your network key will be 10 digit hexadecimal number. that means you can use the combination of 0,1,2,3,4,5,6,7,8,9 and letters a,b,c,d,e,f only. remember it should be exactly 10.
If you set the Encryption to 128 bit, your network key will be the combination of 26 digits. You will need to remember the network key.

WPA

This is one of the most secured type of encryption.
Open the set up interface of the router. Change the wireless security mode to WPA personal. You will find the passphrase box. in this box you can type any password for your wireless network. The password should be the combination of number and letters and it should be 8 or more than 8 characters.
This security type is supported by WINDOWS XP SP2 and above Operating system.

WPA2
This is one of the highly secured type of encryption.
Open the set up interface of the router. Change the wireless security mode to WPA personal. You will find the passphrase box.In this box you can type any password for your wireless network. The password should be the combination of number and letters and it should be 8 or more than 8 characters. Keep the Algorithm to TKIP.
This security type is supported by WINDOWS VISTA and above.

Once you change the wireless settings on the router , try to connect to the new wireless network
Click Here for more info

Dec 19, 2009 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Ntel(R) Wireless WiFi Link 4965AGN i want to


To secure the wireless network or to change any settings on the router you will need to access the router set up interface.
Open the set up interface of the router . Make sure that your computer will be connected to the router with the Ethernet cable.

Once you open the set up page of the router , you will find the place to change the wireless settings of the router. In case of Linksys wireless router , you will see the Wireless Tab at the top.

SSID : It is the name of the wireless network. This name will be shown on your wireless computer or the wireless device so that you can identify your own wireless network. All the routers come with their factory default settings. For example , the Linksys router will come with the Linksys network name.
It will be better to change the wireless network name.


Wireless Security

Change the security mode to WEP. This security type is supported by all the operating system. When change the security mode to WEP, you will find the Network key box to type the network key. Do not type anything in the Passphrase box. Type your network key in the Key 1 Box. If you set the encryption to 65 bits, your network key will be 10 digit hexadecimal number. that means you can use the combination of 0,1,2,3,4,5,6,7,8,9 and letters a,b,c,d,e,f only. remember it should be exactly 10.
If you set the Encryption to 128 bit, your network key will be the combination of 26 digits. You will need to remember the network key.

WPA

This is one of the most secured type of encryption.
Open the set up interface of the router. Change the wireless security mode to WPA personal. You will find the passphrase box. in this box you can type any password for your wireless network. The password should be the combination of number and letters and it should be 8 or more than 8 characters.
This security type is supported by WINDOWS XP SP2 and above Operating system.

WPA2
This is one of the highly secured type of encryption.
Open the set up interface of the router. Change the wireless security mode to WPA personal. You will find the passphrase box.In this box you can type any password for your wireless network. The password should be the combination of number and letters and it should be 8 or more than 8 characters. Keep the Algorithm to TKIP.
This security type is supported by WINDOWS VISTA and above.

Once you change the wireless settings on the router , try to connect to the new wireless network .
Click Here for more info

Dec 16, 2009 | Computers & Internet

1 Answer

I need to add a password to my wireless network


Do you want to secure the wireless network ?
For that you will need to access the router set up.
You said that you want to add a password. I don't understand that. Is your wireless network already secured ? Or you want to make it secured ?
If it is already secured then it must have the password to connect to the wireless network. You can use only 1 password for the network. You can not use 2 password for the wireless network.
If your network is not secured yet then you will need to make it secured and enable password protection on it.
Click Here to know more about how to make it secured

Nov 12, 2009 | Computers & Internet

1 Answer

How do i set a password?


Follow these rules for a secured WLAN
connect to your router as admin using Lan cable.
Set A router password. (if not already set)
Change your SSID from standard name
Consider do not broadcast SSID
In wireless setting select WPA-PSK security protocol
Create a Passphrase to be used as key (write it down)
save and use new setting in every connected device of this network.
I recommend first broadcast your network with WPA-PSK password.
Find your network with your clients (PC, Console, print server) use pw to connect in secured way.
Be sure to set client network properties to "connect to this network even if not broadcasting"
For increased security modify your network in Router to "No broadcast"

Jan 10, 2009 | Belkin Wireless-N Wireless Router with...

Not finding what you are looking for?
D-Link DI-634M Wireless Router (DI634M) Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...