Question about Casio Parts Cash Register PC Desktop

1 Answer

Electroboy, thanks for your help. Can you please assist me with the first query with flexion1. I would like to know how to get the print-out on the receipt showing Quantity/Unit q'ty/@ Result rather than just showing on the receipt as Quantity/Result. Hope to hear from you soon.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

Sorry, I have just got back in the country. I think you need unit pricing during multiplication. This is held in one of two or three settings, so we can now go through and find it. In the machine feature programming section (just after keyboard programming), you'll find lots of tables with address codes at the top and then in brackets it will have a description. Look for the address code that has the description '(print control for receipt)' next to it. Tell me what the address code number is for that table.

Posted on Aug 08, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I need the software for CANON MP 250 install it.

Click here
click on above link select os and download driver and install.
Let me know if you need further assistance.
Thanks for using FixYa.

Aug 03, 2011 | Canon Office Equipment & Supplies

2 Answers

Some of my E-Mails cannot be printed when I get a notice of "Unknown printer problem" on my Canon printer


It would be hepful to know the printer model number.
Also, since when are you facing this issue?

Are you getting this issue printing from a particular computer?
If so, you might want to remove and reinstall the printer once.

Please try to reset the printer once. That might help.

If this doesn't work for you, please comment and let me know, and I will be more than happy to assist you to further resolve your issue.

Oct 05, 2010 | Office Equipment & Supplies

1 Answer

Flexion1. Hi Mark. First of all I would like to thank you for your continued assistance. You're awesome! Now please accept my apology for giving wrong info. Theres actually no problem with amount...

Oh right. You must never use a decimal point. always dollars and cents. i thought you would have set PLU pricing already which would have tought you that :-)

Sep 18, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1. The keyboard orientation is different from the keypad template. The X multiply is located in button 4 under RECEIPT FEED and ERR. CORR/CANCEL is on button 3. Better if it will be back to the same...

To change the keyboard, Turn key to program 4 SUBTOTAL 082 Now press the position where you want the X multiply button 034 Now press the position where you want ERR CORR button SUBTOTAL
as for the amount limitation, try it on the item that you set as 0 last time (3 SUBTOTAL 0 item SUBTOTAL). I need to know if it affects all items or whether any items you set as 0 above will work at less than $1.00. I don't think it has anything to do with training mode. Probably has a limit set from previous owner

Sep 17, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: SOrry for the time lapse as i had other commitments that i had to attend to that led to my having very little free time. However i would really like to thank you very much for your co-operation...

Try this:
Turn key to program mode 3 SUBTOTAL type clerk number to be set to trainee e.g. 1 07 SUBTOTAL 67 SUBTOTAL 100000 CASH SUBTOTAL
To change the clerk back to a normal clerk, do the same thing, but use 000000 in place of 100000

Sep 04, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1, thanks again for your reply. I have gone through the manual once more and successfully found the one you're specifying. It's Address Code 05 (print control for receipt). Hope to hear from you...

Okay great. We'll try the setting for print control then.
Turn key to program mode 3 SUBTOTAL 0522 SUBTOTAL 40 CASH SUBTOTAL
Turn key back to REG mode and try it. You might have to print two receipts before you see the result.
If it is not what you want, do the same procedure again, but replace the 40 with 1000. Otherwise, to have both, use 1040 in place of the 40.
Let me know how you get on

Aug 17, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Casio Cash Register TE-2400 buttons

These three things are all non standard for cash registers and will require codes that I don't have. they can probably be achieved but it will require the machine setting tables from the manual to set the options. My notes are incomplete in this area. I can tell you what to look for if you are able to obtain the dealer manual

Jul 19, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Cash Register Casio TE-2400

You need to check that your PLU button really is a PLU button for a start. In REG mode, press 1 then the PLU button. It should register the product that is also on your first item button. If you press 2 then PLU, it should register the second product on your keyboard. If it doesn't then the PLU button has been moved from the original location. I can give you the code to replace it.
To set the NO SALE button back to location, Turn key to Program mode, 4 SUBTOTAL 41 Now press the NO SALE button on your keyboard. SUBTOTAL Now turn the key back to REG and try the NO SALE button. If it still does nothing then you probably have special programming to disallow the NO SALE command. Let me know.
There is a setting for VAT breakdown printing in the table under the heading 'TRANSACTION KEY PROGRAM' Find this in your manual and under it you will see a table with the heading <CASH>,<CHARGE>,<CHECK>. Near the bottom of the table is the breakdown setting. I assume you are familiar with this programming as you said you had tried other VAT settings. If you just want this setting turned on, use 100000 when programming. Otherwise, you will need to create a number depending upon what features you want to enable for each payment button.

Jul 12, 2010 | Casio Parts Cash Register PC Desktop

2 Answers

Can I print return addresses, including logos, on envelopes using Print Shop 2.0 Basic, or do I need to go to the Deluxe or Professional version?


You could Print using Print Shop 2.0 Basic.

Read :-

Read the Description.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 15, 2010 | Computers & Internet

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts


Level 3 Expert

1789 Answers


Level 1 Expert

34 Answers


Level 1 Expert

43 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides