Question about Human Touch HT 2620 iJoy Massage Chair

2 Answers

My i joy massage chair stays in middle position one of the buttons allows it to come on for just a few minutes then it turns off.what can i do to fix it?it does not go up and down

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Sounds like the drive treads are clogged with fabric from the chair. Unzip front fabrics to expose mechanism and check for a jam. Unplug unit and carefully remove jam with pliers

Posted on Aug 18, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Got the same problem with my Panasonic EP1260 massage chair and found the problem on the second time when i noticed rubber dust particles on the inside panel. Drive belts were all loose and the sad thing is even if i got the part nos. of the belt, there's no where to be found here in the philippines. I searched the internet for possible solution but doesn't solve the problem. Almost loosing hope, till an idea pops out, so what i did is i got this small interior tube from an old wheel chair cut it to a little wider width than the round pulley where the belt run into. I removed the wornout belt and put the pre-cut interior rubber around the pulley then replace the old wornout belt. What it does is that it removes the slack from the belt and this really solve the problem saving my massage chair. This fix is for those who can't find a replacement belt. But if you can replace the belt, is a much better fix.

Posted on Feb 14, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My i joy 100 runs for 5 seconds then shuts off


Hi there Kevin. Did you find the problem? I have the same problem to and I don't know what to do :/

Nov 18, 2013 | Human Touch Ijoy 100 Robotic Massage Chair...

1 Answer

Are electric massage chairs dangerous for someone with a broken back?


It is dangerous to get a massage directly on the area where you have a broken bone because it can cause extreme pain and discomfort, and can sometimes re-break the bone. It can be helpful to massage the area surrounding the bone in order to help bring more blood to the area, but a massage directly on the area should be avoided. If you know your massage chair very well and you can set it to stay only in the area near the broken bone, then it is okay. If not, then a manual massage from a massage therapist is safer because you can tell him/her the area to stay away from

Dec 25, 2012 | Furniture

1 Answer

Can staying on an electric massage chair for several hours consecutively be dangerous?


You can stay in the chair for as long as you want, but most experts agree that it can be dangerous to leave the massage/vibrating on for more than 15-20 minutes. Most chairs today have timers in which they will shut off after a while in case you fall asleep.

Dec 25, 2012 | Furniture

2 Answers

Where can i find replacement parts for my massage chair


Hi, replacement parts can be found on amazon (for every model), here: Natural Back Pain Relief in Just Minutes Day. I hope this was helpful. Cheers

Aug 17, 2012 | Health & Beauty

1 Answer

I went recently to shop around for a massage chair. The salesman went on and on about all the benefits it would bring me. What they don't tell you are the disadvantages I can expect from buying


There are a few disadvantages to note. First being cost. Paying to use a massage chair can quickly add up. Secondly, you should consider weight. Massage chairs are generally very heavy. This can be a huge disadvantage is you need to either move the chair or are having it shipped. Lastly, you should consider effectiveness. Although the use of a massage chair can be very relaxing and beneficial for aches and pains, they are not as effective as a professional masseuse.

Aug 06, 2012 | Furniture

2 Answers

Where can I buy a good quality Shiatsu massage chair online for my office?


There are many online sites selling Shiatsu massage chairs, the problem with this is, you cannot tell how it feels. If you are set on purchasing the item online I strongly urge you to first visit some stores and try out some chairs. This is the only way you can know for sure the comfort you desire. Here are a few models/sites to browse through to get you started.

http://www.amazon.com/New-Shiatsu-Massage-Chair-Recliner/dp/B000OSF5GM

http://www.ebay.com/sch/i.html?_nkw=Shiatsu+Massage+Chair

http://www.nextag.com/shiatsu-massage-chair/compare-html

Aug 06, 2012 | Furniture

1 Answer

Not sure witch jazzy chair i got but the joy stick blink and keeps blinking i have tried pushing horn button twice and also turning it on and pushing joy stick forward waiting for it to beep but no beep....


LOCKING/UNLOCKING THE VSI

The VSI has a feature that enables you to lock your power chair to prevent

unauthorized use.

To lock the VSI:

1. With the VSI powered on, press and hold the on/off key. After one (1)

second, the VSI should beep.

2. Release the on/off key.

3. Push the joystick to the full forward position until the VSI beeps.

4. Pull the joystick to the full rearward position until the VSI beeps.

5. Release the joystick. There should be a long beep.

6. The VSI is now locked.

To unlock the VSI:

1. Press the on/off key and power on the VSI. The maximum speed/profile
indicator should ripple side to side.

Good Luck
mimobility

Feb 17, 2011 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

After a few minutes, all 3 lights to the left of


This is a problem with the width/kneading cam motor or the portion of the PCB that controls this motor. None are available as separate replacement parts. Human Touch will only sell the entire backrest assembly which costs about $600 plus another $60 for shipping. It can be replaced without tools in less than five minutes.

Jun 04, 2009 | Human Touch HT 7450 Massage Chair

Not finding what you are looking for?
Human Touch HT 2620 iJoy Massage Chair  Logo

Related Topics:

629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Human Touch Health & Beauty Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

NOEL
NOEL

Level 3 Expert

4837 Answers

Barrissimo

Level 1 Expert

24 Answers

Are you a Human Touch Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...