Question about Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

My hotpoint ultima extra washing machine says e15 check outgoing pipes i have cleaned the pipe out and is washing to a certain point then e15 shows and starts to beep continuously

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,416 Answers

Hello,

what e15 indicate means an error code that there have been an over flow of water from the drum over to the panel or the wire that suppl power to the screen .

what you will have to do to fix up this problem from the screen is to unscrew the screws with screw driver care then trace the wire ,that is the power supply down to the panel and also to the screen clean up all forms of liquid around the wires and also the panel carefully . then couple it back with care to is position with this the problem is solve.

thank you.

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I clean the filter on my Hotpoint Ultima Super Quiet washing machine


On this model i believe the filter is in the pipe below the tub this pipe needs to be removed from the tub side be sure to fit pipe back secure

Feb 10, 2010 | Hotpoint Washing Machines

1 Answer

I have a hotpoint ulitma washing machine that is


Error code E15 means pump time out, that it is to say the water is not pumping out enough in the time alloted by the control module.
There must be some kind of blockage or restriction in the pump or the outlet hose, so you need to check these.
Please rate my solution.
Thanks.

Jan 19, 2010 | Washing Machines

1 Answer

E15 code on display of Hotpoint ultima extra WD72.


E15 means that it is not draining fast enough. As well as checking the outlet pipes, check the filter leading to the pump. Disconnect the power and pipe. If possible take outside because there will be a residual amount of water. Remove the back panel, then disconnect the locking rings holding the tubes on. Your main target should be the big downflow rubber tube from the drum, in here is a plastic filter. In mine I found a child's sock... plus buttons...plus slime. Problem solved.

Dec 20, 2009 | Hotpoint Washing Machines

1 Answer

Hotpoint ultima washing machine is showing a fault


F 05 normally means there is a blockage or a fault with the pressure sensor. The common place for blockage is in the black pipe from the drum to the pump as it has a filter in here and clogs up. remove the pipe and clean the filter out and remove gunk from the pressure sensor on the side of the pipe as well. If that does not fix things the pressure switch could be faulty itself

Sep 13, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

E15 code showing and constant bleeping sound after timed wash. We cannot find user manual.


E15 is for your drain pipes are clogged. Either from the pump or after the pump. Usually it is something before the pump that is blocking the pump from working correctly. Open the back of the unit and check out all of the hose lines, EVERYTHING. And make sure that you do not have any blokage whatsoever. Once that is done you can try to do a load with really hot water. Usually that is enough to get rid of the rest of the blockage and makes things soft so it runs smoother

Feb 13, 2009 | Hotpoint Ultima WD72 Front Load...

1 Answer

Error 15 on a Hotpoint WM72 Washing Machine


The problem is your pump or filter is blocked,
Remove rear cover of washer, and remove large black hose from tub, remove and clean filter inside hose, check for a blockage in pump, refit filter and hose, and it should now be o/k.
Please rate my solution.
Thanks.

Jan 28, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Machine keeps stopping


if its right at beggining of wash could be pump blockage chack for coins or ffluff blocking filter

Nov 12, 2008 | Hotpoint Ultima WD72 Front Load...

1 Answer

Error E15 - MAchine not draining


drain is same wehatever the program. filter is likely blocked. access is not that easy. take off panel at bottom rear. filter is in pipe from bottom of tub to pump. undo this pipe, take out filter. you may have water everywhere so be carefull

Nov 10, 2006 | Hotpoint Ultima WD72 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WMA42 Front Load Washer Logo

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5123 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...