Question about Sanyo DS27800 27" TV

1 Answer

The remote stopped working. I cannot get the original or a dish network remote to work. The TV is on Video 1 and I cannot change to anything else. How can I get the remotes to work again?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 286 Answers

This hopefully is resolved for you, but if it has not been, or you have any questions about it, here are some steps. Follow the link below, and it will show you how to program the remotes again!!!! Hope this helps!!

http://www.dishnetwork.com/SupportSection/remote-setup


Becki Barned
DISH Network Customer Service

Posted on Jan 19, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I get the dish network screen on # 2 tv and have lost the remote I can't get # 1 tv remote to change the channel. Is there any way to program the remote for tv 1 to change the channel on tv 2.


smithgrvtn,

It is possible to get your TV1 remote to work TV2, but it would have to be a model 6.0/6.3/6.4. If it is not one of those models you would need to have a remote ordered and sent out; then it would work. If your remote is one of the above models; I have included the steps to get that done.

Changing Remote from UHF-to-IR and IR-to-UHF:

1.) Verify correct model of remote and it is IR/UHF compatible. Remove tab from bottom of remote. For TV1: Green Tab with Green 1 in it. For TV2: Blue tab with 2 and black UHF in it.

2.) Push correct tab into remote, and go to your main TV.

3.) Access System Information either with a remote, Sys Info button on front of receiver, or powering it off and pressing the up arrow.

4.) Press and hold the gray SAT button until all buttons on top light up. Release and while the light is blinking enter a number between 1-15 and press Pound(#)

5.) Press Record 3 times and check to see if the address changed to the number you chose. Verify remote works.

If you have any other questions you can let me know here; or at thomas.fuast@dishnetwork.com and I would be happy to see what else can be done!

Tommy Faust
DISH Network

Sep 05, 2011 | DISH Network DVR-625 DTV Receiver /...

1 Answer

I have a Magnavox TS2760 C101 Television that is 15 + years old. We have Dish Network witht he original remote. It has stopped controlling the TV. It was working fine, then quit. Dish does not have the...


Hello! I came across your post, and think that I can be of some assistance. These are the codes that we have for Magnavox, and steps to program the remote. I hope that they help!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

566
560
829

or if that doesn't work, here are the instructions for a power scan, which doesn't use codes. The remote scans the TV for the correct code.

1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.


Becki Barned
DISH Network Customer Service

Mar 02, 2011 | Philips Televison & Video

1 Answer

I have a nuwire for my remote controls for mulitiple items and i can't get it to work on my dish network system


romaneastwoo,

What type receiver is your TV connected to? Do you know your remote model number - located on back of the remote at the top (ex. 2 digit number 5.3 ir). The majority of our TV 1 remotes work in IR mode. If this universal remote uses UHF frequency, it will not work for the IR frequency. Please let me know your receiver and remote types and I will see if there is anything we can do for this remote.

Ray Calo
DISH Network - Executive Offices

Jan 11, 2011 | DISH Network IR Remote Control

1 Answer

Remote won't work


marybsaxton

If changing the batteries did not resolve your issue with your remote, we may need to replace the remote. You might check to see if all batteries have the positive side facing down on the remote. If so, then call 1-800-333-3474, speak with Tech support. I hope this helps.

Ray Calo
DISH Network

Apr 18, 2010 | DISH Network IR Remote Control

1 Answer

My remote show it is supposed to work but when i try to turn on my cable with my dish remote it doesn't do anything


  1. open the door on the right side of your receiver and press 'Sys Info
  2. press record multiple times on your dish remote
  3. press select
  4. if this doesnt work change the batteries and try again
  5. if this doesnt work call Dish for a new remote

Jan 26, 2010 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

I got Two TV's My TV Connected to remote 1 in IR mode. After trying to record some thing using dvr the remote dies on satellite cannot change channel... Tech team tries every thing send new remote and...


topscrew2002

From what you have written, when you try to record on your DVR the remote stops working, is that correct? How long has this been happening? Have you received a new remote? If yes and it is still happening, you are probably getting IR interference from some source in that room. It could be from a florescent lamp, another player, or even the TV. Is the receiver in a open space or in an enclosed area? The IR sensor has to have a direct line of sight to work properly. You may also check on the receiver if anything is obstructing the sensors, maybe dust. I hope this helps.

Ray Calo
DISH Network

Dec 02, 2009 | DISH Network IR Remote Control

1 Answer

Dish Network 625 - how to install and get it to work on 2 tv's. We have one working, need directions on how to get it to work on another tv as well.


On the back of the receiver there is a port labeled IN HOME DISTRIBUTION. Connect a coax to this port and the other end to the other TV. You will then need to put the other TV on 60 air or 73 cable and go back to the original TV with the receiver and using TV1 remote press MENU - 6-1-5 and change the TV 2 OUT to the station you have the other TV on. Now select done and you should have a picture on TV2. eNSURE THE ANTENNA ON THE BACK OF THE RECEIVER IS ELEVATED TO HIGHEST POSITION.Thanks for using Fix Ya.

Jul 14, 2009 | DISH Network DVR-625 DTV Receiver /...

2 Answers

Remote control


this is not a great idea, youcan program your dish remote to your tv though,

Feb 19, 2008 | DISH Network DVR-625 DTV Receiver /...

Not finding what you are looking for?
Sanyo DS27800 27" TV Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...