Question about GE 30 in. JGP337 Gas Cooktop

1 Answer

Ingiters don't work - all burners

After cleaning all four igniters do not work.

Posted by on

  • lbwagner May 19, 2008

    All four of the igniters are not working....any suggestions?

  • carrigan Jun 02, 2008

    I had the same problem after cleaning, all four gas burners will not work. Any suggestions?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Unplug cook top. remove drip pan with screwdriver. Use hair dryer to completely dry area that might have gotten wet during cleaning. This may take five minutes. Put unit back together and plug in cook top.

Posted on Jun 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Westinghouse gas hob four burner only one igniting the other three only light with a match gas coming through but no spark


Clean the wires going to the ignitor of each burner, clean the burners as well. Chances are you have too much oil and dirt on them that is why your burners are not igniting.

Jan 27, 2014 | Cooktops

1 Answer

When one burner knob is turned to ignite all four burners turn on.


What do you mean by "all four burners turn on"
Some electronic ignite systems turn on on all the burners, But just the SPARK not the gas part of the burner.
Is this what you are describing?.

Jan 11, 2011 | Jenn-Air JGD8130 Gas Cooktop

1 Answer

A spark that causes a snapping noise when a burner is turned on.


Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

May 26, 2010 | Viking 31 in. VGSU101 Gas Cooktop

1 Answer

Electronic igniters will not turn off when the gas burner lites. all four igniters run untill you turn off the nob or unplug the unit


I'm dealing with this same problem. This cooktop has a dedicated simmer burner which is the only thing going on the lowest setting. This simmer burner seems to be how the igniter senses that it can stop. If it doesn't light, the igniter keeps clicking. Usually cleaning the burner will solve this. You may need to unscrew the nut holding the lower piece of the burner in place in order to clean it up.
Good luck!

Apr 17, 2010 | DCS 36 in. CTD365N / CTD365L Gas Cooktop

1 Answer

2 of 4 burner ignitions are not sparking


If the ignitors are clean and have a good ground it sounds like the spark module is bad since 2 are out at the same time. You should have a 1yr warranty on this unit. Call your local authorized repair person. Please rate this post.

Dec 14, 2009 | GE JGP945SEKSS Stainless Steel Gas Cooktop

1 Answer

My jenn air espressions gas cooktop has four burners. When


Remove the round burner plates and clean thoroughly in soap and water. Clean the burner ring where the burner plates rest with soap and water.

Let me know what you find.

Dec 13, 2009 | Cooktops

1 Answer

Constant sparking


I don't have a Thermador cooktop but here is ma taught.

Could you unplug the two faulty igniters and see if problem remained

Could you plug one of the faulty igniter at the location of a good one. The goal is to isolate the problem. Is it the igniter or the electronic board.

Faulty ground problem may occur also after an spillover on the stove. In that case, use a cotton swab dipped in scrubbing alcool and clean the spark area on the igniter and the burner.

Good luck

Mar 31, 2017 | KitchenAid 31 in. KGCC505 Gas Cooktop

2 Answers

Burner on Thermador stove top does not light


Switch for burner 4 is not working properly - could have a bad contact resulting in just one spark and nothing more.

May 03, 2017 | Thermador SGS36GS Gas Cooktop

3 Answers

Dacor gas range igniter clicking


I did have the same problem after the house keeping people done with cleaning. They used window/surface cleaner. First I asked them not to clean the ignitor with any cleaner. Here is what I did to solve the problem
I took scotch scour pad (one that you use for washing dishes), In dry state I polished ignitor switch. It is abrading the residuals and deposits on the top and polishing it. Don't use any thing more abrasive than that. MAGIC - I don't have any more problem.

Aug 14, 2007 | Dacor Preference SGM365SS Gas Cooktop

Not finding what you are looking for?
GE 30 in. JGP337 Gas Cooktop Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Cooktops Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

meztang
meztang

Level 2 Expert

112 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a GE Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...