Question about Woods 201 cu. ft. Upright Freezer V2003RW3

2 Answers

Have defrosted my 210 cu.ft. upright freezer v2003rw3, do not have my manual to hand . At what setting on the dial should I put it at to start it up?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 3,773 Answers

Every Refrigerator has its own "personality" There is no common
setting for any one refrigerator. I would start with 3
The real solution is what I have always told my customers
Get a refrigerator thermometer and a freezer thermometer
Refrigerator temp should be about 33-37 degrees.
Freezer should be about 0-10 degrees. below 0 is overkill

If this was helpful please rate me.
Leo Ponder Appliance-Tyler,Texas
imufo2@sbcglobal.net

Posted on Aug 07, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

You need to put the freezer on setting 5 to get it started back up.

Good Luck

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door was left opened for sometime and freezing is not good now, what I should do


If the only fault was the door left open, switch off and defrost completely for 24 hours. Clean condensor coil. Restart and run for 12 hours before checking.

Aug 07, 2012 | Woods 201 cu. ft. Upright Freezer V2003RW3

1 Answer

Defrost cycle not working. Coils are icing up what could be the problem?


The defrost time clock is not working Get a new one at an appliance parts store

Sep 15, 2010 | Woods 201 cu. ft. Upright Freezer V2003RW3

1 Answer

Water is dripping in side the freezer, and freezing at the bottom of the freezer, where is the hose , so i can check it for blocks in hose???


You have a plugged drain hose. Defrost unit then check drain hole to see if clear. These have a real problem with that. This company is out of buisness now.

Aug 28, 2010 | Woods 201 cu. ft. Upright Freezer V2003RW3

1 Answer

Ice builds up in the freezer


Hi, The defrost heater may not be working properly (timer stuck, heating element burned out, bad defrost thermostat,etc.). The unit should go into defrost mode about every 6-8 hours typically and last about 30 minutes (depending on model of freezer). During defrost cycles the compressor and fan do not run (don't want to keep cooling while trying to defrost). Once defrost is over, the fan and compressor get power again.
Take care

Jul 17, 2010 | Woods 201 cu. ft. Upright Freezer V2003RW3

1 Answer

Woods Upright Frost Free Freezer


its just the machine defrosting itself, let it wee until its empty, then switch back on and let it settle for 24hours before loading up with beer etc......

May 27, 2010 | Woods 201 cu. ft. Upright Freezer V2003RW3

1 Answer

Ice forms on the floor of the freezer


sounds like a defrost problem there should be a defrost control and some form of a heater onthe inside of your freezer you should call a technician for proper diagnosis on which part you will need

Apr 28, 2010 | Woods 201 cu. ft. Upright Freezer V2003RW3

1 Answer

Kenmore upright freezer, about 16 cu ft. Buildup


symptoms you are describing are faulty door seals, try putting a thin piece of paper between door and frame to make sure doors are sealing,also when did you do a full manual defrost??(once a year even with auto defrost)

Apr 07, 2010 | Kenmore 16.7 cu. ft. / 473 liter Upright...

1 Answer

Our upright freezer door will not seal tight with a vacuum anymore. The freezer fills up with snow from the air drawn in. I have defrosted it and cleaned the seal. What should I do now?


That could be one of two things, one the door is not aligned properly and more important the gasket has failed and needs replacement. The snow as you call it is ice condensed from the atmospheric air that is getting by the gasket. You may want to check the door gasket and sealing surfaces especially in the area of the "snow".
Good luck,
Gilshultz

Dec 01, 2009 | Woods 201 cu. ft. Upright Freezer V2003RW3

Not finding what you are looking for?
Woods 201 cu. ft. Upright Freezer V2003RW3 Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Woods Freezers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

15633 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

Are you a Woods Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...