Question about Samsung Microwave Ovens

Open Question

Model: Samsung Combi C103FL The control panel no longer works..When you switch it on the display lights and the light on opening the door comes on but so does the beeping sound and SE on the display..but no button works. Please Help

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MicrowaveSvc
  • 9085 Answers

SOURCE: microwave samsung suddenly stoped working

UPDATE

The -SE-error is a shorted keypad.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

If you would like to have us do this for you, we do that for $39.95 plus part costs.

Please feel free to contact me directly if you need more help.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

Posted on Jul 21, 2008

Ad
localwonder
  • 6784 Answers

SOURCE: microwave not working

HI, this is a faulty control panel. replace asap if possible.

Posted on May 29, 2009

MicrowaveSvc
  • 9085 Answers

SOURCE: kenmore microwave model number 401.80084700 Displaying -SE-/-5E-

-SE- error means you have a shorted membrane keypad.

So until it is repaired, please leave it unplugged or leave the door open when it's not in use, and of course one should never leave a microwave unattended while cooking.

There are three ways you can get it fixed:

DE34-00178X SWITCH MEMBRANE $20.30
ref#53 membrane keypad
take yours off as in the video at our site, peel the old keypad off as in this handy guide with pictures , clean the surface, stick on the new keypad
order by part number here
(We can do this job for you for a total of $70.25, but as you can see, the other two options are more practical and economical)

DE94-01647A ASY CONTROL PANEL $39.01
ref#66 control panel frame with keypad
take yours off as in the video at our site, disconnect the keypad strip as shown here, move your circuit board to the new frame, reinstall
order by part number here

DE94-01648A ASY CONTROL, BOX $58.12
ref#59 complete control panel assembly with frame, keypad and circuit board
take yours off as in the video at our site, then install the new one
order by part number here

If these parts are not in stock, they should be available in about a week or so.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Aug 09, 2009

  • 6771 Answers

SOURCE: Samsung microwave SMH8165W displaying error code -SE- and continuously beeps.

SE means system error, the keypad has a short in the membrane, or the control board has issues.

Posted on Jun 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

GE microwave (Model JE2160SF03) trips breaker when door opened


Remove the control panel, take pictures of the door switch wiring while they are still connected to the door switches, then remove the door switch assembly. Have someone at the appliance store check each switch and repair the ones that are defective.

I purchased a switch for $7, reinstalled the door switch assembly and the microwave is working fine now.

Jul 02, 2012 | GE Microwave Ovens

1 Answer

My microwave doesn't work, but display works


I would strongly consider replacing the microwave oven, prices have dropped considerably. The problem you are describing is in the keypad controller board.

Apr 01, 2012 | Samsung Microwave Ovens

1 Answer

AEG Fault code E202 On opening the door of my microwave combi oven the interior light flashes accompanied by what sounds like a relay chattering and the display flashing between the normal display and...


I would suspect a bad door switch or door switch mount, or possibly a bad electrolytic capacitor on the control circuit board.

See:
http://www.microwavedisplay.com/safety.txt
http://www.microwavedisplay.com/disassembly.txt
http://www.microwavedisplay.com/doorsw.txt

Beyond that, I could only speculate, since I don't have experience or information on AEG products.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jan 09, 2010 | Electrolux Microwave Ovens

1 Answer

When microwave finishes light doesn't come on when door open; display keeps reading "food ready" after food is taken out--have to push the "clear/off" button to make "food ready" display go away; counter...


Shorted switch in the door latch assembly.wihout the full model number I can't tell how to get to it, but usually one needs to remove top grille, remove screw holding the control panel, remove control panel. Good luck.

Nov 26, 2009 | GE Profile Spacemaker II PEM31 Microwave...

1 Answer

Display scramled, light works, timer counts down but unit doesnt


We regularly repair such control units for customers nationwide by mail for $39.95 postpaid in about a week or so with a one-year guarantee.

Assuming your model number is DMT2420 (since that's the category under which your query was posted) then you likely also need a new secondary interlock (bottom door switch).

Door switch or mount trouble is usually caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

If you have a different model, please reply back or contact me directly with the correct model.

If you want to send your control panel assembly in for repair, you can note on the repair form that you need a new door switch and we'll throw one in at no charge.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

88c8a0b.jpg

Jun 15, 2009 | Dacor DMT2420 1200 Watts Microwave Oven

1 Answer

Microwave not working


HI, this is a faulty control panel. replace asap if possible.

May 29, 2009 | Whirlpool Microwave Ovens

4 Answers

Goldstar MV1501W not heating or turntable, light/display does wrk


micro switch is bad .remove top vent cover 4 screws,after removing plastic vent panel you will see 1 screw above display time window,remove this screw and lift up the complete button time control panel slightly and pull towards you to remove.there are 2 connections on this panel 1 is a 12 pin connector and a 2 pin power connection remove both put control panel aside.now there are 3 micro switches where the door pins close into the oven lock,remove 2 screws that hold the micro switch housing,on the bottom of housing you will see a small clip gently pull to the right and push back to remove .there are 2 switches on bottom of it and 1 on top. the 1 on top is normally open and closes when door is shut but like mine it stayed open and resulted in (light s display but no turntable)soon as i replaced upper microswitch it runs perfect.i hope this helps .MODEL MV1501W GOLDSTAR

Dec 10, 2008 | Goldstar MV-1155 Microwave Oven

1 Answer

Cooling fan works with door open.


This is usually caused by either a bad door switch, a loose door switch mount, or a problem on the control panel.

Even though a door switch clicks, it may still be bad inside. Its continuity must be checked.

Switch or mount trouble can be caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

If you someone you know decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

You can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

There should also be a "mini-manual" hidden inside the unit behind the control panel, which is very helpful when troubleshooting.

If you think the problem is on the control panel, which we repair these nationwide for $39.95 postpaid.

We're happy to help and we appreciate your thoughtful rating of our answer.

Mar 15, 2008 | GE JVM3670 Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9085 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Samsung Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...