Question about Nikon D80 Digital Camera with 18-135mm Lens

1 Answer

D80 suffering from error code r05 and r06 along with flashing err on the lcd display. Camera only captures a shot every other shutter release. Removed lens and cleaned contacts, cheged to a different lens problem still exists....any feedback appreciated.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Nikon Expert
  • 225 Answers

As far as I can read in the manual there is not any error code r05 and r06. My guess is you are seeing that in the LCD on top of the camera. Turn to page 36 in the D80 manual there you is what you are after. The r05 and r06 are the number of shots remaining in the buffer.

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

R05 error on nikon d80


The Nikon D-90 users manual says on page 256 that the ERR message indicates a camera malfunction and that it can be cleared by releasing the shutter.

I've found on my D-90 that the only way I can get the shutter to release is my turning the camera off. When I turn it back on the ERR message is gone and the camera functions as it should.

Occasionally, I have had to remove and reinstall the battery to make the camera turn off but this happens only rarely.

The users manual says if the condition occurs frequently or persists that you should contact a Nikon authorized repair center. I suggest that you contact Nikon tech support at www.nikon.com to see what they suggest. I think this information would apply to the D-80 as well.


The r05 is not an error message. It is an indication that the camera is shooting in burst mode (multiple shots with one button push) and that you can shoot five more shots before the camera must pause, clean its cache and be prepared to shoot again.

Feb 02, 2014 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

Nikon d80 camera shows err error, when shutter is pressed the amount of shots remaining, shows er07. shutter works, but no picture is taken. Bracketing sign is also on display and wont go off.l


failure of the aperture unit is the usual cause - usually the contacts for the phase switch have come loose from the gear. You can find info on this by searching for the problem on the internet, including how to repair it.

Apr 06, 2013 | Nikon D80 Digital Camera

1 Answer

I'm getting a r16 error on my D90


The "r16" in the display is not an error code. It is simply informing you of the number of exposures that can be held in the camera's internal high speed memory before shooting would have to stop while the D90 transfers the pictures to the memory card. If you held the shutter release, you could watch the r16 value decilne by one for each exposure (r15, r14, r13, etc.).

Page 256 of the D90 User's manual indeed shows the Err error code, and defines it as a "Camera Malfunction", "Release shutter. If error persists or appears frequently, consult Nikon-authorized service representative." The "err" error code is a generic error. The camera has detected a problem, but it doesn't know exacly what, similiar to the fEE code. The "err" code could be camera / lens contacts or it could be a circuit board or even shutter failure. You've already tried the common contact cleaning fix (that never seems to solve the problem) without any luck, so you might have to call Nikon Support and arrange for service.

Good luck!

Jan 31, 2013 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

The LCD continues to flash ERR and although the shutter sounds when the button is depressed, no image is taken.


Hi cpereira27, the manual states on page 132 "press shutter-release button again. If error persists, consult with Nikon authorized service representative". Something else to try is to reset the camera, you will find how to at the bottom of page 129.

Jun 28, 2010 | Nikon D80 Digital Camera with 18-55mm Lens

2 Answers

Nikon d80 problem (err flashing with r09 in the lcd display)


I belive this isn't a fault but more to do with how you are using the camera. The r09 message is to do with the camera buffer and how many more pictures it can hold. You do have a memory card installed, right? The r09 is normally not an error, but simply an indicator of how many more pictures you can take in the current burst before the buffer fills. The number will vary according to the image quality and size settings.

Jan 17, 2010 | Nikon D80 Digital Camera

2 Answers

"Err" appear in the viewfinder and LCD display


i have a Orite Mv 3115-Real Dv Mpeg4Vga resolution 30 FPS Digital Veidio Camera. no the problem that the battery of my camera down and i sent that with my friend to bay a new for me unfortunatly he miss that on travel so i need to fins a new battery for that
i hope sir you can healp me to find one and a charger too

Feb 15, 2009 | Nikon D80 Digital Camera with 18-135mm...

2 Answers

Nikon D70 Flashing


ERR is i think an error message generated when the camera can not read the cf card ? have you had an problems with corrupted images ?

Sep 24, 2008 | Nikon D70 Body Only Digital Camera

1 Answer

Nikon D80 Camera


During shooting, or when the shutter-release button is pressed halfway, the number of images that can be stored in the memory buffer at current settings is shown on the exposure-count displays in the control panel and viewfinder. "r06" indicates that six images can fit in the camera's buffer, "r08" would indicate eight frames. Any other number could be displayed as well. Burst mode is used when you want to hold down the shutter button and continuously shoot. You are probably shooting in burst mode and your buffer is full, set the camera to single shot and see if that helps.

Jul 02, 2008 | Nikon D80 Digital Camera with 18-135mm...

3 Answers

Error Code


No, it's not an error. What this display indicates, is the availability of the total number of photos you want to take. If the display says, "r06", then you are in JPEG Mode. If it says "r03", then you are either 1) in RAW Mode, or 2) have your Noise Reduction on (see FAQ #2). As you take a few photos in succession, you will notice the indicator drops by how many photos you took.

Mar 01, 2008 | Nikon D100 Digital Camera

1 Answer

Digital SLR "r06" (or other number) in LCD display


During shooting, or when the shutter-release button is pressed halfway, the number of images that can be stored in the memory buffer at current settings is shown on the exposure-count displays in the control panel and viewfinder. "r06" indicates that six images can fit in the camera's buffer, "r08" would indicate eight frames. Any other number could be displayed as well.

Aug 30, 2005 | Nikon D70 Digital Camera with 18-50mm Lens

Not finding what you are looking for?
Nikon D80 Digital Camera with 18-135mm Lens Logo

Related Topics:

1,163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...