Question about Canon PowerShot SD600 Digital Camera
Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to auto focus while the lens is extending, hopefully seating the lens barrel guide pins in their slots. Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
Posted on Aug 07, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 16, 2011 | Canon PowerShot A560 Digital Camera
Apr 15, 2011 | Cameras
Aug 02, 2010 | Canon PowerShot SD1000 Digital Camera
Apr 28, 2009 | Canon PowerShot SD850 IS Digital Camera
Aug 27, 2008 | Canon PowerShot A75 Digital Camera
Jul 19, 2008 | Canon PowerShot SD1000 Digital Camera
May 01, 2008 | Canon PowerShot SD1000 Digital Camera
67 people viewed this question
Usually answered in minutes!