Question about Indesit Washing Machines

1 Answer

Indesit widl 126-problem with the drum,moving back and forth to much and noisy.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It would seem that the bearings go on this model, which causes the inner drum to knock and bang against the outer during spin. If you continue to use the machine without replacing both sets of bearings, it will cause irreparable damage and the machine will need to be replaced.

Posted on Sep 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Indesit WIDL 106 is very noisy in spinning cycle, we have changed dampers and spings but the problem is still there!


With door open try moving the drum up and down. If it moves, the bearings are on their way out

Apr 21, 2012 | Washing Machines

1 Answer

I have an Indesit Washer/dryer (WIDL 126 S), and it is dot draining the water. I set in on drain or dry and nothing happens, it just fills with more water.


HI,
Check back of washe with a flashlight for a bent or clogged drain hose. Do not move washer to check it. When you move it , it will straighten out and you will never know if it was bent
Also while it is pumping , pick up end of drain hose at drain and observe the volume of water being pumped.
If no water then the Pump needs replaced.
Thank you for using fixya
Leo Ponder
Please rate me if this helped

Aug 12, 2011 | Washing Machines

1 Answer

I have an Indesit Widl 126 which is about 5 years old. We have just moved house and there is no hot water connection for the machine in the kitchen, there is just a cold. The machine has hot and cold...


Asuming the water is in the washer, then it sounds like the element could be faulty, to be certain, you would need to test it with a meter, and don't forget it is filling with cold water, so will take a lot longer to get hot.

Mar 03, 2010 | Washing Machines

1 Answer

Washing machine not working


The lid switch/latch has failed.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 10, 2009 | Washing Machines

1 Answer

I do i stop the indesit widl 126 mid cycle?


Open the door - or press stop/cancel.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 28, 2009 | Washing Machines

1 Answer

Wiring for Indesit Widl 126


Tell me, is the machine compleatly dead or what is it doing?

Sep 10, 2008 | Indesit WA 115 Front Load Washer

1 Answer

Widl 126


hiya
this could be down to a poor connection from one pcb to the other, best thing to do is disconnect one block at a time (make a note of where it goes) and clean the connections.
REMEMBER TO UNPLUG FIRST

hope this helps


please dont forget to rate the helpfulness of this reply, thanks kj

Jul 21, 2008 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

neilmoto

Level 2 Expert

75 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...