Question about D-Link 802.11g Wireless Router WBR-1310 (WBR1310)

3 Answers

D-Link Wireless Router WBR-1310, Version A1

Our router stopped working. I have my main computer connected to modem, and internet is working fine. But my wireless laptop (XP), my wife's computer (Vista), and my son's computer (XP) can't see the network. I've tried shutting everything down and rebooting. I've tried hitting the reset button on the router.

Posted by on

  • 2 more comments 
  • Anonymous May 02, 2008

    Went away for a few days and came back to find the router not working. Although the cable modem was fine, there appeared to be no communication between it and the router. Powering both down did not help. Nor did resetting the router back to back to factory settings. When I try to re-install the router, I get a message "error: internal error". At this point, I'm afraid that the router is fried - and of course - one month after the 1-year warranty expired. Any help would be appreciated!

  • geethar6 Aug 04, 2008

    Hi,



    I bought this router newly and tried powering it on, and it gave a green status light. But after a couple of days, when i tried connecting it, it used to not switch on. In the middle, this router got dropped down once. I have tried pressing the reset button for a few seconds and it din't work up. Is there a suggestion to fix this problem.



    Regards,

    Geetha.

  • Anonymous Aug 06, 2008

    I had the same problem. I just woke up one morning and it didn't work. I called the support hotline and they ran me through some options like hitting reset etc. before conculding that it was dead. They were able to send me another router in the mail at no cost (except for the cost of shipping the dead router back to them). Unfortunetly, the new router they sent me was also dead and their customer service is less than helpful this time. I would suggest just buying something else.

  • Anonymous May 04, 2009

    I've had the same problem as everybody else, I came back after the long Easter weekend and viola - only power and not status light, it was as if the router was getting no signal of an internet connection. I called up the tech support and they asked me to hit the reset button and nothing happened even after powering it off. I'm well over a year (1.5 yrs or so?) so no warranty is covered under mine.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

ø1 i what to know if this suport is avaliable in french
ø2 i always get an error whit the dns server ( found it whit msn messenger ) for iformation mi own is wbr1310_revB_firmware_202
ive tried to update de firmware but dosent work :(

Posted on Aug 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 537 Answers

Make sure you fully reset the device to its factory settings. I am not sure on the DLink what the procedure is. Usually it's unplugging the unit, pressing the reset button for 10-30 seconds, then repowering on the unit.

From a wired laptop, reinstall the software using the CD that came with the unit to set up the router. Your manual should cover all of this. If you don't have the manual/software, re-download it from D-Link's web site.

If the router will not power on or give status lights, then that's another problem entirely.

Mike

Posted on Apr 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem.

Make sure you turn off all the security with the software in package then slowly turn it all back on, on piece at a time. For whatever reason, it comes with MAC address filtering already turned on, which makes it impossible to see if you don't have the right info put in to the computer that the router was configured with.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to setup d-link wbr 1310


Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Jul 18, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

My computer is not reading anything on my dvd. Need to down load WBR-1310. help


are you trying to set up the router.
You don't need CD or DVD .

If you connect the computer to the modem, does it work ?

if that works then the modem is working.
Now connect the modem and computer to the router.
open the set up page of the router.
change the settings of the router according to the ISP.

Click Here for more information about router set up

Jan 08, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have a D-Link router but the main computer does not connect to the internet when I connect the cord from the internet cable box to the router and the other cord from the router to the main computer


You connect a CAT5/ETHERNET cord from the MODEM to the yellow WAN port on the ROUTER and then the computers to the other four ports.

The Router alse need to be set up and the CD that came with it will help you through the stages you need to do.

Nov 15, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

DLink router connected to internet but webpage doesnt open


With an Ethernet cable, connect your computer _directly_ to the cable-modem (or DSL-modem), bypassing the D-LINK router.
Now, can you web-surf?

Sep 19, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have comcast cable net and D-link WBR 1310


Hi, forget about the USB connection since you wanted to use a router for your wireless connection. Contact Comcast asnd make sure they assist you in making your computer connect to the Internet using the ethernet connection because you are going to use the ethernet connection for the modem-router connection. Once your computer is online with the ethernet connection, you can connect your Dlink router to the modem and configure it for Internet connection. There will be more steps before you can use the wireless connection. Just make sure you can get online with ethernet connection first.

Jul 23, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Wireless Home network will not stay connected to internet


So you have a DSL modem connected to a router connected to a wireless router connected to both your computers? Sounds like you need to just get a wireless modem and throw all the routers away.

Jun 01, 2009 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

D-LINK Wireless G Router WBR-1310


Try changing the channel on your wireless setting or try downgrading your operating system to windows XP.

Jan 02, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Connection to my Desktop not working.


Try and change the cable from the router to computer with a new one and do the same with the modem and see if connects. Hopefully it's just the cables that are faulty.

Aug 11, 2008 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

4,130 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Are you a D-Link Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...