Question about Reebok Rt1000 Treadmill Walking Belt

1 Answer

Readmill suddenly stops - Reebok Rt1000 Treadmill Walking Belt

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 34 Answers

This machine has what they call a thermal switch. It is designed to
shut the machine off if it gets too hot. This heat is caused by
friction. Friction is caused 99% of the time by the walking belt or
the drive belt. If it is the drive belt then it can be solved by
either applying a treadmill lubricant (must be made for treadmill
belts) or by purchasing a new belt. If you feel the underneath side
of the belt and you feel a screen door type feeling you just need
lubricant. If you feel a smooth surface you will probably need a
new belt. If you have lubricated in the past year and your belt has
the screen door feel then take off the motor hood cover and check
the drive belt. If it is worn then you will need to replace that.
You can purchase either of these products from the manufacturer, at www.iconservice.com. a couple of other places that may have them for discounts are www.ebay.com, www.fitnessrepairparts.com, or www.treadmilldoctors.com.

Posted on Aug 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Acme Juicerator suddenly stopped working. I am worried the motor burnt out. What should I do?


Acme 5001 Supreme Juicerator Juice Extractor Stopped ...

www.fixya.com > ... > Acme 5001 Supreme Juicerator Juice Extractor
Acme 5001 Supreme Juicerator Juice Extractor, stopped working related issues. ...My motor just suddenly stopped working. what happens if a screw peg ...

Acme 6001 Juice Extractor Juicer stopped working - Questions

www.fixya.com > Forum > Juicers > Acme > Acme 6001 Juice Extractor
Acme 6001 Juice Extractor, juicer stopped working related issues. Get free help, solutions ... ...juicer just suddenly stopped working. Mine stopped working after ...

Amazon.com: Customer Reviews: Acme 5001 Juicerator ...


Dec 03, 2015 | Sponge & Chamois Just Swipe Chamois Lens...

2 Answers

My Hamilton beach 40996 kettle Suddenly it stopped boiling. The on button lights up and reads temp but never boils. It worked and then suddenly stopped. Any chance this is a program problem somehow?


What a crazy over-complicated kettle!
Disc element kettles do tend to have a limited life that is a small fraction of the lifespan of standard kettle elements. The ones I have had usually only last until the guarantee has expired. To discover whether it is the kettle or the base it will be necessary to use a multimeter to check the supply from the base.

Nov 17, 2015 | Hamilton Beach Kitchen Appliances - Others

1 Answer

Tunturi t7 showing error 20 !


this means the treadmills power reading when the treadmill was operating at speeds of 1 miles per hour or less . Excessive amount of power is being demanded from the motor controller for an excessive period of time
Causes:treadmill user (especially a heavier user) is standing on the drive belt.
the drive belt too is badly worn.
brush motor faulty
SCR motor cotroller lekay or shorted drive motor or capacitor
IN short RUN the sotware calibration for diagnostic.
Remedies:Lube the deck belt, determine using AC ammeter for the amount of use the current being drawn by the readmill.Replace the drive motor brushes.or replce the motor controller board. see the block diagram
God bless you

10_12_2012_9_46_16_am.gif

Oct 11, 2012 | Tunturi T70 Treadmill

1 Answer

Nothing comes on no screen and i have power where it plugs in


download for free : www. fitness.manualsonline.com or www.iconservice.com

try to adjust the Reed swithc, clean, and tight the connector very well, see the diagram attached.

2) Test the fuse and c. breaker reset.

3) See if there are some connector or loose wires.

4) RUN the software calibration for diagnose, and troubleshooting, and fix it

sincerely. God bless you
5_6_2012_10_27_12_am.gif

May 05, 2012 | Exercise & Fitness

1 Answer

Problem


Dear Sir:
You must run the software calibration for easy diagnose and troubleshooting. Adjust +clean the sensor speed. see the diagram . Of course I strong recommend that you mus call to the company where do you buy the machine for warranty and revision very important.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.
3_10_2012_4_36_20_am.gif

Mar 05, 2012 | Reebok V 680 Treadmill

1 Answer

My Hyper Extension 1360 model is diplaying a error 4 message


hi im wanting to know if there is anywhere that i cld buy a orange switch its to turn the readmill on and off

Nov 16, 2010 | Exercise & Fitness

1 Answer

I just bought a weslo treadmill it was a floor model buyt i didnt get a key now the readmil wont start


hi, the key isnt a problem to get. ive seen some selling in ebay just type in weslo treadmill parts and some listings should come up. or of you go on the ICON HEALTH & FITNESS LTD website these are the main people who sell weslo treadmills leeds based. or their telephone 08451770512. the replacement key is about £12.00 to £20 hope i have helped.

Nov 13, 2010 | Weslo Cadence CT 4.8 Treadmill

1 Answer

Hi, I own a Rodger black Compact Treadmill (AG-113060) for 3 years now, it has hardly been used, but the motor seems to have broken, the electrics work perfectly, such as heart rate & running speed...


hi i have a reebok i run readmill the motor stopped on that and it was the bushes in the side of the motor had come unscrewed hope this helps

Oct 01, 2010 | Baby Gear

1 Answer

Whirlpool AWM 045-1000 washing machine has suddenly stopped working and warning light "WATER STOP" has come on. Any ideas for a fix?


Whirlpool AWM 045-1000 washing machine has suddenly stopped working and warning light "WATER STOP" has come on. Any ideas for a fix?

Sep 19, 2009 | Whirlpool Washing Machines

Not finding what you are looking for?
Reebok Rt1000 Treadmill Walking Belt Logo

501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Reebok Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Are you a Reebok Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...