Question about Whirlpool LHW0050PQ Front Load Washer

1 Answer

Have a lhw0050pq4 ft loader washer (whirlpool) 4years old little use. in my motorhome power went out now it won't spin or wash but does fill n drain can u help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

HI. This issue has several areas of concern that can only be identified by running a diagnostic test. The much needed diagnostic scan can be initiated by following the steps drawn out in the service manual I have provided, below. With that said; I am most certain that the inverter board has failed, but run through the entire diagnostic scan to rule out any other issues that may be present.

Click here to access your service manual.

The diagnostic procedure starts on page 6-1 in the manual provided and it ends on page 6-6. To start the test, follow the instruction on page 6-2.

Posted on Aug 06, 2010

  • 1 more comment 
  • Michael Masters
    Michael Masters Aug 06, 2010

    Inverter board(motor controller) part number will be 8183137.

  • rick282 Aug 10, 2010

    How much for a board delivered to 7208 West Exp. 83 Mission Tx.

  • Michael Masters
    Michael Masters Aug 10, 2010

    HI. Ok, you can order this board from Sears parts direct for $121.70. This is a great price. Most inverter boards run around 300 to 400 dollars, so this is a good grab. Click here to order.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LHW0050PQ4 whilpool washing machine goes through wash cycle but wont rinse,spin or drain


According to the service manual, if the washer won't drain or spin the drain may be clogged.

http://www.searspartsdirect.com/partsdirect/user-manuals/27552/lhw0050pq4-whirlpool-parts-residential+washer-manual

Apr 04, 2014 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

Have a lhw0050pq4 ft loader washer (whirlpool) 5 years old little use. in 5th wheel trailer and it seems to lose its place in the cycle can you help?


The control board will need to be replaced. It is located on the top, right hand side of the unit as you look at it from the front. Remove the screws on the top panel, slide it back to remove it. You will see the board. Here is the board to order.

Oct 29, 2012 | Whirlpool LHW0050PQ Front Load Washer

3 Answers

Whirlpool top loading washer won't fill completely


did you shorten the stand pipe for the outlet drain ?if not try putting a short extension on the top .

Nov 18, 2017 | Whirlpool Washing Machines

1 Answer

How do I repair my Whirlpool Ultimate Care 2 LSQ9549L Top Loader Washer?


check the motor coupling,if the coupling is broken you'll hear the motor run but the agitiator won't move and no spin,the coupling connects the motor to the transmission.watch this video
http://www.youtube.com/watch?v=9K1KHEogf3c

May 30, 2012 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool top loader washer will not spin


Could be one of several different things depending on the age and model. If its less than 10 years old and is a top load washer its probably a motor coupling (connects the motor to the transmission kinda like a belt) or lid switch. If the water is draining out but the washer is not spinning its probably the motor coupling. If it still has water in it and won't spin, its probably the lid switch. If your washer is a front loader there could be several things going on. Hope that helps.

Aug 29, 2011 | Whirlpool Washing Machines

1 Answer

WASHER FILLS WITH WATER, THEN WON'T AGITATE. TURN KNOB TO SPIN AND IT DRAINS THEN SPINS. STILL WON'T AGITATE


WASHER FILLS WITH WATER, THEN WON'T AGITATE. TURN KNOB TO SPIN AND IT DRAINS THEN SPINS. STILL WON'T AGITATE please show me a diagram

Jun 14, 2011 | Whirlpool LSR7333 Top Load Washer

2 Answers

Whirlpool top load washer LSQ9610LG0 wont spin but makes noise


HI thanks for your question. the part that failed is called the motor coupling. it s located on the motor and the transmission. if you need help to replace come on back. but that's the part you need to change. thanks

Oct 14, 2008 | Whirlpool LSQ9610L Top Load Washer

Not finding what you are looking for?
Whirlpool LHW0050PQ Front Load Washer Logo

Related Topics:

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...