Question about Car Audio & Video

3 Answers

Unable to set clock on pioneer super tuner IIID - tried holding down clock button but time doesn't flash. Your assistance will be appreciated thank you

Posted by on

  • kghorlock Apr 28, 2008

    thanks for responding - only details I can see on removable control centre = EEQ MOSFET 50wx5 on LHS and Super Tuner IIID on RHS

    Hope this helps?

    Regards

  • kghorlock Apr 28, 2008

    thanks for responding - Tried your solution without success! - got to 4th step OK but pressing "power button" switched radio on (tried pressing clock button & power together but "no go")
    Futher info re model - only details I can see on removable control centre = EEQ MOSFET 50wx5 on LHS and Super Tuner IIID on RHS

    Hope this helps?

    Regards

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 119 Answers

Dear kghorlock

Please use the following steps. (This cannot be verified completely though because you dont state the exact Pioneer Model)


Turn radio off.
Hide clock face.
Press and hold a few seconds “clock button” to bring clock face up.
Press and hold “power on button” till clock starts to blink.
The 4 buttons in a cluster on the right under audio, move the hours and minutes.
press power when done.

I hope this helps
Regards
EngineerGR

Posted on Apr 27, 2008

  • T.M.
    T.M. Apr 27, 2008

    To: computerrep

    same solution ? :) sorry if I double posted, i was simply writing the same thing.

    Regards

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

HI,

Can you please give me the model no. do that i can help you fix it.

Waiting for your reply

Posted on Apr 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 758 Answers

To set up the clock...
Turn radio off.
Hide clock face.
Press and hold a few seconds “clock button” to bring clock face up.
Press and hold “power on button” till clock starts to blink.
The 4 buttons in a cluster on the right under audio, move the hours and minutes.
press power when done.

I hope this helps
Please rate accordingly
Thank you
Computerrep

Posted on Apr 27, 2008

  • Jean Sintulaire Apr 27, 2008

    Should you have any questions please let me know...

    Thank you

    Computerrep

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot figure out how to set the clock on my pioneer 40wx4 super tuner d...held the clock button down but still couldn't ever get it to flash nor did pressing any buttons do anything...helllllp


I'd need the actual model number to give specific instructions (Starts with "DEH-" usually), but on most pioneers you have to turn the car on and put the stereo into standby by pressing Source. Once in standby, press and hold either the FUNC or AUDIO button to enter the menu.

Try that or provide the model number and we'll go from there.

Jul 01, 2011 | Car Audio & Video

1 Answer

Do not have manual. Need to program tuner channels and clock.


For clock turn key on and stereo off. Press and hold the function button for 3-5 seconds. the clock should appear with the hours flashing. Use the up-down buttons to set hours. Push the right button to set the minutes. Now turn on the stereo with the source (or power) button and your done!
Remember key on stereo off. hold function, the rest will become second nature once you've done it a few times.
Tuner pre-sets are super easy. Tune to the station you want and then just hold the # button (1-6) that you want that station on for about 3 seconds. The channel your on, (e.i 104.9) will flash a couple of times and then stop flashing. When it stops flashing it's in the memory. Tune your next channel and hold # 2,3,4,5,6, If 6 isn't enough push BAND and your on FM-2 with 6 more pre-sets, Push it again for FM-3 with 6 more presets. Push it a 3rd time for the AM band with 6 pre-sets and one more time to get back to FM-1.

Apr 07, 2010 | Pioneer DEH-P3100 CD Player

1 Answer

How do I set the clock for my super tuner IIID/


What is the model number of the supertuner III?

Jun 12, 2009 | Pioneer Car Audio & Video

2 Answers

I have a Pionner 40wx4 Super Tuner III D. I want


Gerry M I have a pioneer 40wx4 super tuner III D I lost my manuael and want to change the time on the clock and could someone tell me how to do it

Jun 11, 2009 | Car Audio & Video

2 Answers

Cant get the clock to set


most you hold down the time button and push up or down. try something similiar, hold down a button and push an up button? just play with it but don't reset it andcause more problems

Jun 01, 2009 | Pioneer DEH-245 CD Changer

2 Answers

Setting clock radio


Press and hold down the "clock" button. You should see your time start flashing. Normally you set the time with the volume or channel control. Check which control lets the selector jump from "hou" to "minute and set the minutes. To exit setting menu, depress "clock" button again

Apr 28, 2009 | Car Audio & Video

1 Answer

How to set the clock on Pioneer car stereo Super Tuner 3D


ok what u do is turn radio off hit clock so that it displays the time then hold audio button in until clock starts flashing then use your arrow ****. not your vol. ****.

Mar 04, 2009 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

7 Answers

Pioneer Supertuner IIID


To change the clock on this Pioneer stereo try this.

1. Press and HOLD the source button till the radio shuts off. Release the button.

2. Press and HOLD the source button again for about 5 seconds until the hour indicator on the clock begins flashing.

3. Press the UP and DOWN buttons to adjust the hours.

4. Press the LEFT or RIGHT arrows to MOVE TO THE MINUTES.

5. Press the UP and DOWN buttons to move the minutes.

6. When complete, press the source button to exit.

Oct 01, 2008 | Pioneer DEH-P690UB CD Player

1 Answer

Pioneer eep mosfet 50wx4 super tuner 3d


the clock does not flash by pressing the (src) source button. press (scr) source button until clock appears then press the func function button (it is just under the audio button) then the clock will flash. press the up down buttons to change the hour then press the side to side buttons to switch to the minutes then press the up down button to change the minutes

Aug 19, 2008 | Pioneer DEH-P6800MP CD Player

2 Answers

Pioneer super tuner 3


For most Pioneer single CD players, you can set the clock using the following steps:

1. Press and hold the SOURCE button until the unit turns off.
2.Press and hold the FUNCTION button, until display pops up, then release.
(If you do not have a FUNCTION button, then push the AUDIO button)
3. Press the FUNCTION button again until the clock shows on the display.
4. Press the UP and DOWN buttons to adjust the hours.
5. Press the LEFT or RIGHT arrows to move to the minutes.
6.Press the UP and DOWN to adjust minutes.
7. When complete, press the SOURCE button to exit.
  • 1 year ago

Apr 29, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4823 Answers

yadayada
yadayada

Level 3 Expert

71694 Answers

The Knight
The Knight

Level 3 Expert

73150 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...